MF 5465
AGCO Massey Ferguson - PTO Switch - 3619445M2
Fits *Part dependant on serial number. Contact us to check it will fit your tractor. Massey Ferguson 5400 Series 5425*, 5435*, 5445*, 5455*, 5460, 5460 SA, 5465, 5470, 5475, 5480 6200 Series 6235, 6245, 6255, 6260, 6265, 6270, 6280, 6290 8200 Series 8210, 8220, 8240, 8250, 8260*, 8270, 8280
€67,95
Sparex LED Roof Work Light, Interference: Class 3, 9900 Lumens Raw, 10-30V () - S.152147
Sparex LED Roof Work Light - 9900 Lumens Raw, 10-30V This powerful Sparex LED roof work light is designed for use on a variety of agricultural machinery. It features a spot beam with a 80° beam angle and delivers 9900 lumens raw. The light is IP6K9K rated for water and dust resistance, and is also CE and RoHS approved. It is compatible with a wide range of tractors, including Case IH, Deutz-Fahr, Fendt, Massey Ferguson, and Steyr models. Key Features: 9900 Lumens Raw Spot Beam with 80° Beam Angle IP6K9K Rated for Water and Dust Resistance CE and RoHS Approved 10-30V Operating Voltage 2.75Amps Power Consumption @ 12V 1.38Amps Power Consumption @ 24V Alternative to: 119780, 147673 Related products: 119891, 151835, 151854, 163620, 163905 Suitable For: Case IH / International Harvester: CS110, CS120, CS130, CS150, CS48, CS52, CS58 Deutz-Fahr: AGROSTAR 4.61, AGROSTAR 4.68, AGROSTAR 4.71, AGROSTAR 4.78, AGROSTAR 6.08, AGROSTAR 6.11, AGROSTAR 6.21, AGROSTAR 6.28, AGROSTAR 6.31, AGROSTAR 6.38, AGROSTAR 6.61 Fendt: 712 VARIO, 712 VARIO (712), 714 VARIO, 716 VARIO, 718 VARIO, 720 VARIO SCR (735), 722 VARIO SCR (736), 818 VARIO, 820 VARIO, 822 VARIO, 824 VARIO, 826 VARIO, 916 VARIO, 918 VARIO, 920 VARIO, 922 VARIO, 926 VARIO, F 345 GT, F 395 GT, FARMER 200, FARMER 204 S, FARMER 240 S, FARMER 250 S, FARMER 250 SA, FARMER 250 V, FARMER 250 VA, FARMER 260 P, FARMER 260 PA, FARMER 260 S (296), FARMER 260 SA, FARMER 260 V, FARMER 260 VA, FARMER 270 P, FARMER 270 PA, FARMER 270 V, FARMER 270 VA, FARMER 275 S, FARMER 275 SA, FARMER 275 V, FARMER 275 VA, FARMER 280 P, FARMER 280 PA, FARMER 300, FARMER 303 LS, FARMER 303 LSA, FARMER 304 LS, FARMER 304 LSA, FARMER 304 S, FARMER 305 LS, FARMER 305 LSA, FARMER 306 LS, FARMER 306 LSA, FARMER 307 A, FARMER 307 C, FARMER 307 CA, FARMER 307 LS, FARMER 307 LSA, FARMER 307 LSE, FARMER 308 C, FARMER 308 CA, FARMER 308 LS, FARMER 308 LSA, FARMER 308 LSE, FARMER 309 CA, FARMER 310 LSA, FARMER 310 LSE, FARMER 311 LSA, FARMER 311 LSE, FARMER 312 LSA, FARMER 500, FAVORIT 509 C, FAVORIT 515 C, XYLON 520, XYLON 522, XYLON 524 Massey Ferguson: 5410, 5420, 5425, 5430, 5435, 5440, 5445, 5450, 5455, 5460, 5465, 5470, 5475, 5480, 6235, 6245, 6255, 6260, 6265, 6270, 6280, 6290, 6445, 6455, 6460, 6465, 6470, 6475, 6480, 6490, 6495, 6497, 6499, 7465, 7475, 7480, 7485, 7485 DYNA VT/DYNA STEP, 7490, 7495, 8240, 8250, 8260, 8270, 8280 Steyr: 8080, 9078, 9086, 9090, 9094, 942, 948, 955, 964, 970 Specifications: Alternative to: 119780, 147673 Beam Angle: 80° Beam Type: Spot Beam Brand: Sparex Cable length (mm): 450 CE Approved: Yes Connection Type: 2 pcs. DJ70215-6.3-11 Connector ECE Rating: Reg 10 Effective Lumens: 2700 / 1360 Fixing: 2 Bolts Function: 2, High / Low Beam Housing Material: Aluminium Interference EMC EMI CISPR 25: Class 3 IP Rating: IP6K9K Lens Colour: Clear Lens Material: Plastic Safety Glass Light source: LED Lumens Raw: 9900 Lux Value: 12115 Number of LEDs: 30 x LEDs Overall height (mm): 101.8 Overall length (mm): 182.5 Overall width (mm): 60.89 Power Consumption @ 12V: 2.75Amps Power Consumption @ 24V: 1.38Amps Related products: 119891, 151835, 151854, 163620, 163905 RoHS Approved: Yes SAE Approved: No Shape: Rectangular Tariff Code: 8539213000 Volts: 10-30V Watts: 90W With Noise Suppression: Yes Working Temperature °C: -40°C to 50°C This product is not associated with any particular OEM part number.
€88,95
Sparex Wiper Motor 12V | Sparex Part No.S.35460
Wiper Motor 12V | Sparex Part No. S.35460 Product Specifications Brand: Sparex Degrees: 85° Related Products: 42766, 42767 Self Park: Yes Shaft Length: 57 mm Shaft Diameter: Tapered Spline, Shaft 10, Thread 8 mm Switch: No Tariff Code: 8501109190 Thread Length: 33 mm Thread Size: M16 Thread Type: Metric Voltage: 12V Compatible Wiper Arm: S.42766 Compatible Wiper Blade: S.42767 Suitable For This Wiper Motor is compatible with a wide range of Massey Ferguson models, including: 5425 5445 5455 5460 5465 6120 6130 6140 6150 6160 6170 6180 6190 6235 6245 6255 6260 6265 6270 6280 6290 6445 6455 6460 6465 6470 6475 6480 6485 6490 6495 6497 6499 7465 7475 7480 7485 7485 DYNA VT/DYNA STEP 7490 7495 8110 8120 8130 8140 8150 8160 8170 8180 8210 8220 8240 8250 8260 8270 8450 8460 8470 8480 Manufacture Information This product is manufactured by Massey Ferguson and is identified by OEM part numbers: 3715610M2, 3715610M1.
€294,95
Sparex Water Pump Assembly (Supplied with Pulley) | Sparex Part No.S.103315
Water Pump Assembly (Supplied with Pulley) | Sparex Part No. S.103315 Introducing the high-quality Water Pump Assembly, designed for optimal performance and durability. This essential component is supplied with a pulley, ensuring a seamless fit and reliable operation for your agricultural machinery. Product Specifications Part Number: S.103315 Type: Water Pump Assembly SKU: SP-103315 Suitable For This water pump assembly is compatible with the following models: Landini LANDPOWER 135 Massey Ferguson 5465, 6465, 6475, 6480, 7465, 7475, 7480 Manufacture Information Manufactured by Landini and Massey Ferguson, this water pump assembly features the following OEM fitment numbers: Landini: U5MW0196 Massey Ferguson: 4224708M91, U5MW0196 Ensure your machinery operates at peak efficiency with this reliable water pump assembly. Order now to keep your equipment running smoothly!
€269,95
Sparex Viscous Fan Drive | Sparex Part No.S.104714
Viscous Fan Drive | Sparex Part No. S.104714 Enhance the performance of your Massey Ferguson machinery with the high-quality Viscous Fan Drive from Sparex. Designed for durability and efficiency, this fan drive is an essential component for optimal engine cooling. Product Specifications Brand: Sparex Number Of Bolt Holes: 4 PCD: 69 mm Tariff Code: 8414900090 Diameter (Ø): 163 mm Compatibility Information This Viscous Fan Drive is suitable for the following Massey Ferguson models: 5460 5460SA 5465 5470 6270 6280 6290 6460 6470 8210 Manufacturer Information Part Number: Massey Ferguson 3783350M1 Upgrade your equipment with the reliable Viscous Fan Drive from Sparex, ensuring your machinery runs smoothly and efficiently.
€287,95
Sparex Valve Collet (Pair) | Sparex Part No.S.118841
Valve Collet (Pair) | Sparex Part No. S.118841 Enhance the performance of your machinery with the Valve Collet (Pair) from Sparex. Designed for durability and precision, this essential component ensures optimal engine function. Product Specifications Brand: Sparex Compatible with Perkins Engine Family Type Codes: DJ, DK, DF, DG, DC, DD, DE, XK, RR, RS, RT, RE, RG, RJ, RF, RH, RK, VK Tariff Code: 8409990090 Suitable For This Valve Collet is compatible with a wide range of models: Landini: 6860, 7860, 8860, GHIBLI 100, GHIBLI 105, GHIBLI 80, GHIBLI 85, GHIBLI 90, GHIBLI 95, GLOBALFARM 100, GLOBALFARM 105, GLOBALFARM 90, GLOBALFARM 95, GLOBUS 65, GLOBUS 75, GLOBUS 80, LEGEND 105, LEGEND 120, LEGEND 125, LEGEND 130, LEGEND 135, LEGEND 140, LEGEND 145, LEGEND 160, LEGEND 165, LEGEND 180, LEGEND 185, MYTHOS 100, MYTHOS 105, MYTHOS 110, MYTHOS 115, MYTHOS 90, POWERFARM 105, POWERFARM 60, POWERFARM 75, POWERFARM 85, POWERFARM 95, REX 100, REX 105, REX 60, REX 70, REX 75, REX 80, REX 85, REX 90, REX 95, TECHNOFARM 60, TECHNOFARM 70, TECHNOFARM 75, TECHNOFARM 80, TECHNOFARM 85, TREKKER 100, TREKKER 105, TREKKER 70, TREKKER 75, TREKKER 80, TREKKER 85, TREKKER 90, TREKKER 95, VISION 100, VISION 105, VISION 80, VISION 85, VISION 90, VISION 95 Massey Ferguson: 275, 290, 3315, 3325, 3330, 3340, 3350, 3355, 3425, 3435, 3445, 3455, 410 UZEL, 420 UZEL, 4225, 4235, 4240, 4245, 4255, 4260, 4265, 4270, 430 UZEL, 4325, 4335, 4345, 4355, 4360, 4365, 4370, 5425, 5435, 5445, 5455, 5460, 5465, 6170, 6180, 6235, 6245, 6255, 6260, 6265, 6270, 6280, 6290, 6445, 6455, 6460, 6465, 6470, 6475, 6480, 7465, 7475, 7480, 8120, 8210, 8220, 8925, 8926, 8937, 8939, 89410, 8947 McCormick: C105 MAX, C60 L EUROPA, C60 MAX, C70 L EUROPA, C75 L EUROPA, C75 MAX, C80 L EUROPA, C85 L EUROPA, C85 MAX, C95 MAX, F100, F105, F60, F70, F75, F80, F85, F90, F95, MB75, MB85, T100, T105, T70, T75, T80, T85, T90, T95, V60, V70, V75, V80, V85, V90 Perkins: 1103A-33 (DJ), 1103A-33T (DK), 1103B-33 (DF), 1103B-33T (DG), 1103C-33 (DC), 1103C-33T (DD), 1103C-33TA (DE), 1103D-33 (XK), 1104A-44 (RR), 1104A-44T (RS), 1104A-44TA (RT), 1104C-44 (RE), 1104C-44T (RG), 1104C-44TA (RJ), 1104C-E44 (RF), 1104C-E44T (RH), 1104C-E44TA (RK), 1106C-E60TA (VK) Manufacturer Information Landini Part No: 3142W004 Massey Ferguson Part No: 4222141M1 McCormick Part No: 3142W004 Perkins Part No: 3142W004 Upgrade your equipment with the reliable Valve Collet (Pair) from Sparex, ensuring compatibility with a variety of leading agricultural machinery brands.
€5,95
Sparex Top link pin 25x110mm Cat. 2 | Sparex Part No.S.81
Top Link Pin 25x110mm Cat. 2 | Sparex Part No. S.81 Enhance your agricultural machinery with the Top Link Pin from Sparex, designed for durability and reliability. This standard pin features a diameter of 25mm and a working length of 110mm, making it an essential component for various tractor models. Product Specifications Pin Diameter: 25mm (1 inch) Working Length: 110mm (4 5/16 inches) Overall Length: 148mm (5 27/32 inches) Head Diameter: 29mm (1 5/32 inches) Hole Diameter: 12mm (1/2 inch) Category: 2 Brand: Sparex Alternative Part Numbers: 5362, 69, 900081, 164580 Tariff Code: 7319909000 Compatibility Information This Top Link Pin is suitable for a variety of tractor brands and models, including: Allis Chalmers - Various Models Ford / New Holland - Models: 5000, 5100, 5110, 5600, 5610, 5610S, 5700, 6410, 6600, 6610, 6610S, 6700, 6710, 6810, 6810S, 7000, 7010, 7100, 7200, 7410, 7600, 7610, 7610S, 7700, 7710, 7810, 7810S, 7910, 8240, 8340, 8610S, 8700, 9700, TS100, TS110, TS115, TS120, TS80, TS90, TW10, TW15, TW20, TW25, TW30, TW35, TW5 Landini - Models: 5830, 6030 Leyland - Model: 702 Massey Ferguson - Models: 1080, 133, 135, 140, 148, 152, 155, 165, 168, 175, 178, 185, 188, 20, 230, 235, 240, 243, 245, 250, 255, 260, 263, 265, 275, 285, 290, 30, 3115, 340, 350, 360, 372, 390, 425, 440, 460, 5340, 5360, 5460, 550, 560, 575, 590, 6110, 6120, 6130, 6140, 6150, 6160, 6170, 6180, 6235, 6245, 6255, 6260, 6270, 6445, 6455, 6460, 6470, 6480, 6490, 6495, 6612 DYNA 4, 6613 DYNA 4, 6614 DYNA 6, 6712 S DYNA 4, 7714 DYNA 4, 865 White Oliver - Various Models Manufacturer Information This Top Link Pin is compatible with OEM part numbers from: Ford / New Holland - 82014254, 83904859, 1934723, D5NNN939A Landini - 183611M92, 3582083M1, 3615647M1 Massey Ferguson - 3615647M2, 3304172M91, 182977M1 Upgrade your machinery with the reliable Sparex Top Link Pin, ensuring optimal performance and compatibility with a wide range of agricultural equipment.
€4,95
Sparex Top Link Clip | Sparex Part No.S.15351
This high-quality Spring Clip is a genuine Sparex part, designed for use with a range of Massey Ferguson and Landini tractors. It's a reliable and durable replacement part, ensuring your tractor operates smoothly. Product Specifications Brand: Spenco erp_hazardous: No Finish: Zinc & Gold Passivate Tariff Code: 7303009090 Suitable For Massey Ferguson 1080, 265 S (TR), 275, 285 S (TR), 290, 298, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 3115, 3125, 350, 362, 365, 372, 375, 375E BRAZILIAN, 382, 390, 390E BRAZILIAN, 390T, 396, 398, 399, 425 BRAZILIAN, 435 BRAZILIAN, 440 BRAZILIAN, 445 BRAZILIAN, 460 BRAZILIAN, 5340 BRAZILIAN, 5355 BRAZILIAN, 5360 BRAZILIAN, 5365 BRAZILIAN, 5425, 5435, 5445, 5460, 5465, 565, 575, 590, 592, 595, 6110, 6120, 6130, 6140, 6150, 6160, 6170, 6180, 6235, 6245, 6255, 6260, 6265, 6270, 6445, 6455, 6460, 6465, 6470, 675, 690, 698, 698T, 699 Landini 1660057M2, 1660057M1
€7,95
Sparex Top Link Forged Hook - Cat. 3, Thread size: M36x3 - RH - S.74434
Top Link Forged Hook - Cat. 3, Thread size: M36x3 - RH - S.74434 Introducing the Top Link Forged Hook from Spenco, designed for durability and performance in agricultural applications. This high-quality forged hook is an essential component for various Massey Ferguson models, ensuring reliable operation and compatibility. Product Details Hook Diameter: 60mm Thread Length: 171mm (6 3/4 inches) Overall Length: 368mm (14 31/64 inches) End Radius: 2 3/4 inches (70mm) Fitting: Right Hand (RH) Hook Inside Diameter: 2 23/64 inches Thread Size: M36x3 (Metric) Notes: Slotted Thread Tariff Code: 7303009090 Compatibility This forged hook is suitable for the following Massey Ferguson models: 5465 6150 6160 6170 6235 6245 6255 6260 6265 6270 6280 6290 6445 6455 6460 6465 6470 6475 6480 Related Products Explore additional options that complement the Top Link Forged Hook: 14636 33004 33010 33017 148196 148197 Upgrade your agricultural equipment with the Top Link Forged Hook - a reliable choice for enhanced performance and durability.
€202,95
Sparex Top Link Knuckle Thread - Cat.28mm - Thread size: M36x3 - LH | Sparex Part No.S.13987
Top Link Knuckle Thread - Cat. 28mm - Thread Size: M36x3 - LH | Sparex Part No. S.13987 Upgrade your tractor's performance with the Sparex Top Link Knuckle Thread, designed specifically for a seamless fit and reliable operation. With a hole diameter of 28mm, a thread length of 190mm, and an overall length of 318mm, this component is engineered for durability and efficiency. Product Specifications Brand: Sparex Category: 28mm End Radius: 1 17/64 in (32 mm) Fitting: Left Hand (LH) Hole Diameter: 1-3/32 in (28 mm) Knuckle Bore Diameter: 1 3/32 in (28 mm) Knuckle Width: 2 9/16 in (65 mm) Overall Length: 12 33/64 in (318 mm) Related Products: 10289 Tariff Code: 7303009090 Thread Length: 7 1/2 in (190 mm) Thread Size: M36x3 Thread Type: Metric Suitable For Information This Top Link Knuckle is compatible with a range of Massey Ferguson models, including: 5465 6150 6160 6170 6235 6245 6255 6260 6265 6270 6280 6290 6445 6455 6460 6465 6470 6475 6480 Manufacture Information This product is not associated with any particular OEM part number, ensuring versatility and compatibility across various applications.
€70,95
Sparex Timing Cover Gasket | Sparex Part No.S.118829
Timing Cover Gasket | Sparex Part No. S.118829 Ensure optimal performance and reliability with the Timing Cover Gasket from Sparex. This essential engine gasket is designed to provide a secure seal, preventing leaks and maintaining the integrity of your engine. Product Specifications Brand: Sparex Perkins Engine Family Type Code: DJ, DK, DF, DG, DC, DD, DE, XK, XL, XM, RR, RS, RE, RG, RJ, RH, RK, NK, NL, NM, NH, NJ, PK, PJ Tariff Code: 8484900090 Compatibility Information This Timing Cover Gasket is compatible with a wide range of machinery: Landini Models: 5-100H, 5-110H, 5-115H, 5-80H, 5-90H, 7860, 8860, GHIBLI 105, GHIBLI 85, GHIBLI 95, GLOBALFARM 100, GLOBALFARM 105, GLOBALFARM 80, GLOBALFARM 90, GLOBALFARM 95, MYTHOS 105, POWERFARM 100, POWERFARM 105, POWERFARM 110, POWERFARM 60, POWERFARM 75, POWERFARM 80, POWERFARM 85, POWERFARM 90, POWERFARM 95, POWERMONDIAL 100, POWERMONDIAL 105, POWERMONDIAL 110, POWERMONDIAL 115, POWERMONDIAL 120, POWERMONDIAL 95, REX 100, REX 105, REX 110, REX 120, REX 60, REX 65, REX 70, REX 75, REX 80, REX 85, REX 90, REX 95, TECHNOFARM 60, TECHNOFARM 65, TECHNOFARM 70, TECHNOFARM 75, TECHNOFARM 80, TECHNOFARM 85, TREKKER 100, TREKKER 105, TREKKER 75, TREKKER 80, TREKKER 85, TREKKER 90, TREKKER 95, VISION 100, VISION 105, VISION 85, VISION 95 Massey Ferguson Models: 275, 290, 3425, 3435, 3445, 3455, 410 UZEL, 420 UZEL, 430 UZEL, 5410, 5420, 5425, 5430, 5435, 5440, 5445, 5450, 5455, 5460, 5465, 5475, 6445, 6455, 6460, 6465, 6470, 6475, 6480, 7465, 7475, 7480, 8925, 8926, 89410, 8947 McCormick Models: C100 MAX, C105 MAX, C110 MAX, C60 L EUROPA, C60 MAX, C65 L EUROPA, C70 L EUROPA, C75 L EUROPA, C75 MAX, C80 L EUROPA, C80 MAX, C85 L EUROPA, C85 MAX, C90 MAX, C95 MAX, F100, F105, F110, F120, F60, F65, F70, F75, F80, F85, F90, F95, MB75, MB85, T100, T100 MAX, T105, T110 MAX, T115 MAX, T75, T80, T80 MAX, T85, T90, T90 MAX, T95, V60, V65, V70, V75, V80, V85, V90, X60.20, X60.30, X60.40 Perkins Models: 1103A-33 (DJ), 1103A-33T (DK), 1103B-33 (DF), 1103B-33T (DG), 1103C-33 (DC), 1103C-33T (DD), 1103C-33TA (DE), 1103D-33 (XK), 1103D-33T (XL), 1103D-33TA (XM), 1104A-44 (RR), 1104A-44T (RS), 1104C-44 (RE), 1104C-44T (RG), 1104C-44TA (RJ), 1104C-E44T (RH), 1104C-E44TA (RK), 1104D-44 (NK), 1104D-44T (NL), 1104D-44TA (NM), 1104D-E44T (NH), 1104D-E44TA (NJ), 1106C-E66TA (PK), 1106D-E66TA (PJ) Manufacturer Information Massey Ferguson Part Number: 4224958M1 Perkins Part Number: 3681P046 Upgrade your engine's performance with the reliable Timing Cover Gasket from Sparex. Designed for a perfect fit and exceptional durability, this gasket is a must-have for maintaining your machinery's efficiency.
€49,95
Sparex Thrust Washers (Pair) | Sparex Part No.S.110986
Thrust Washers (Pair) | Sparex Part No. S.110986 Enhance the performance of your machinery with our high-quality Thrust Washers, specifically designed for a wide range of Sisu engines. This pair of washers is compatible with models including the Sisu 311C, CS, 311D, DS, 320D, DS, 320DE, DSRE, 411B, C, 411BS, CS, 411CX, 420D, DS, 420DR, DRS, 420DSI, 420DSRE, 420DW, 420DWRE, 420DWRIE, 611D, 612D, DS, 620D, 620DS, 620DSRE, 620DW, 620DWRE, 634D, 634DS, 634DSBE, and 634DSRE engines. Product Specifications Brand: Sparex Tariff Code: 7318220095 Compatibility Information These thrust washers are suitable for various agricultural machinery brands, including: Case IH / International Harvester: CS100, CS100 PRO, CS105 PRO, CS110, CS120, CS130, CS150, CS68, CS75, CS78, CS80, CS80 PRO, CS85 PRO, CS86, CS90, CS90 PRO, CS94, CS95 PRO, CVX1135, CVX1145, CVX1155, CVX1170, CVX1190, CVX1195, CVX120, CVX130, CVX140, CVX150, CVX160, CVX170, CVX175, CVX195 Challenger: 648, 648 COMBINE, MT315B, MT325B, MT335B, MT345B, MT555B, MT565B, MT575B, MT585B, MT595B, MT645B Fendt: 5270 C Ford / New Holland: T7510, T7520, T7530, T7540, T7550, TVT135, TVT145, TVT155, TVT170, TVT190, TVT195 Massey Ferguson: 3615, 3625, 3635, 3645, 3655, 4435, 4445, 4455, 5465, 5470, 5475, 5480, 6460, 6465, 6470, 6475, 6480, 6485, 6490, 6495, 6497, 6499, 7254, 7256, 7260, 7465, 7475, 7480, 7485, 7485 DYNA VT/DYNA STEP, 7490, 7495, 7497, 7499, 8240, 8250, 8450, 8460 Sisu Diesel: 311C, 311CS, 311D, 311DS, 320D, 320DE, 320DS, 320DSRE, 411B, 411BS, 411C, 411CS, 411CX, 420D, 420DR, 420DRS, 420DS, 420DSI, 420DSRE, 420DW, 420DWRE, 420DWRIE, 611D, 612D, 612DS, 620D, 620DS, 620DSRE, 620DW, 620DWRE, 634D, 634DS, 634DSBE, 634DSRE Steyr: 6145CVT, 6150CVT, 6155CVT, 6160CVT, 6170CVT, 6195CVT, 667, 680, 9080M, 9080MT, 9085MT, 9090M, 9090MT, 9095MT, 9100M, 9100MT, 9105, 9105MT, 9115, 9125, 9145, CVT 120, CVT 130, CVT 150, CVT 170, CVT 6135, CVT 6140, CVT 6145, CVT 6150, CVT 6155, CVT 6160, CVT 6170, CVT 6175, CVT 6190, CVT 6195, M9078, M9086, M9094, M968, M975 Valmet & Valtra: 1102, 1103, 1203, 255, 355, 365, 455, 465, 505, 515, 555, 565, 600, 6000, 602, 604, 605, 6100, 612, 615, 6250, 6250 HITECH, 6300, 6350, 6350 HITECH, 6400, 6550, 6550 HITECH, 6600, 665, 6650, 6650 HITECH, 6800, 6850, 6850 HITECH, 700, 702, 703, 800, 8000, 802, 803, 8050, 8050 HITECH, 8100, 8150, 8150 HITECH, 8200, 8300, 8350, 8350 HITECH, 8400, 8450, 8450 HITECH, 8550, 8550 HITECH, 8600, 865, 8750, 8800, 8950, 8950 HITECH, 900, 903, 905, 915 Manufacturer Information OEM fitment information includes: Case IH / International Harvester: 162000010714, 47108919 Ford / New Holland: 162000010714 Massey Ferguson: 3637636M1 Steyr: 162000010714, 47108919 Valmet & Valtra: 836119459, V83611945
€15,95
Sparex Thrust Bearings Set +0.0075 | Sparex Part No.S.40346
Thrust Bearings Set +0.0075 | Sparex Part No. S.40346 Enhance the performance of your machinery with the Thrust Washer Set (+ 0.0075'') from Sparex. Designed for durability and precision, this thrust washer set is an essential component for various agricultural and industrial applications. Product Specifications Brand: Sparex Related Products: 40345 Size: 0.075'' Tariff Code: 7318220095 Compatibility Information This thrust washer set is suitable for a wide range of machinery, including: Allis Chalmers: 170, 175 Case IH / International Harvester: CX100, CX70, CX80, CX90, MX100C, MX80C, MX90C Landini: 6500, 6530, 6550, 6560, 6830, 6840, 6860, 6870, 6880, 7500, 7530, 7550, 7560, 7830, 7860, 7870, 7880, 8000, 8500, 8530, 8550, 8560, 8830, 8860, 8870, 8880, 9060, 9080, 9500, 9880, ADVANTAGE 65-95, ATLAS 70-100, BLIZZARD 65-95, LEGEND 105-185, MYTHOS 90-115, REX 65-95, VISION 80-100 Massey Ferguson: 1007, 1014, 1080, 1085, 1100, 1105, 1114, 1130, 1134, 1135, 1200, 1250, 165, 165 US BUILT, 168, 174, 175, 175 US BUILT, 178, 184, 185, 188, 194, 194-4, 240, 255, 261, 2620, 2640, 2645, 265, 270, 2705, 2720, 2725, 275, 290, 290 US BUILT, 500, 510, 520, 530, 560, 575, 6000, 6120, 6130, 6140, 6150, 6160, 6170, 6180, 6190, 6400, 660 BRAZILIAN, 740, 750, 760, 8110, 8120, 820, 830, 840, 850, 860, 865, 8925, 8926, 8937, 8939 McCormick: CX100, CX70, CX80, CX90, MTX175 White Oliver: 1850, 2-105, 2-110, 2-85 Manufacturer Information OEM fitment for various brands: Allis Chalmers: 70251398, 70251399 Case IH / International Harvester: F62448, 796202R1, 796203R1 Ford / New Holland: 505074, 505076 JCB: 02192013 Landini: 131137322, 131137312, 735743M1, 735742M1 Massey Ferguson: 31137322, 31137312, 735742V1, 735743M1 Perkins: 31137312, 31137322 White Oliver: 735742M1, 164833A Upgrade your machinery with the reliable Thrust Washer Set (+ 0.0075'') and ensure optimal performance in your agricultural or industrial applications.
€4,95
Sparex Pressure Switch | Sparex Part No.S.106637
Pressure Switch | Sparex Part No. S.106637 Ensure optimal performance and reliability with the Pressure Switch from Sparex. Designed for precision and durability, this essential component is perfect for various agricultural machinery. Product Specifications Brand: Sparex High Pressure Closes: 260 PSI Falling Pressure High Pressure Open: 390 PSI Rising Pressure Low Pressure Closes: 28 PSI Rising Pressure Low Pressure Open: 28 PSI Falling Pressure Related Products: 106699, 106713, 106714, 106721, 106725, 106726 Tariff Code: 8708991055 Suitable For This Pressure Switch is compatible with a wide range of models: Fiat: M100, M115, M135, M160 Ford / New Holland: 2310, 2610, 2810, 2910, 3310, 3610, 3910, 4110, 4600, 4610, 5110, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7410, 7600, 7610, 7740, 7840, 7910, 8160, 8210, 8240, 8260, 8340, 8360, 8530, 8560, 8630, 8730, 8830, TM110, TM110 BRAZILIAN, TM115, TM120, TM120 BRAZILIAN, TM125, TM130, TM130 BRAZILIAN, TM135, TM135 BRAZILIAN, TM140, TM140 BRAZILIAN, TM150, TM150 BRAZILIAN, TM155, TM165, TM165 BRAZILIAN, TM175, TM180, TM180 BRAZILIAN, TM190, TM7010 BRAZILIAN, TM7020 BRAZILIAN, TM7030 BRAZILIAN, TM7040 BRAZILIAN, TS100, TS100 BRAZILIAN, TS110, TS110 BRAZILIAN, TS115, TS120 BRAZILIAN, TS120A, TS6000 - (BRAZIL), TS6020 - (BRAZIL), TS6030 - (BRAZIL), TS6040 - (BRAZIL), TS80, TS90, TW10, TW15, TW20, TW25, TW30, TW35, TW5 Massey Ferguson: 3050, 3060, 3065, 3070, 3080, 5445, 5455, 5465, 6180, 6255, 6270, 6290, 7619 DYNA 6, 7619 DYNA VT, 7620 DYNA 6, 7620 DYNA VT, 7622 DYNA 6, 7622 DYNA VT, 7624 DYNA 6, 7624 DYNA VT, 8727, 8730, 8732, 8735, 8737 Manufacturer Information This Pressure Switch is also compatible with various OEM part numbers: Case IH / International Harvester: E9NN19N715AA, 86625515, 83977007, 85812697 Fiat: 83977007, E9NN19N715AA Ford / New Holland: 83995566, 86625515, 87626267, 87626268, F0NN19N715AA, E9NN19N715AA, 87623657, 85812697, 83977007 Landini: 3697198M1, 3384301M2 Massey Ferguson: 3384301M2, 3712526M1, 3902105M1 Upgrade your machinery with the reliable Pressure Switch from Sparex and experience enhanced performance and efficiency.
€19,95
Sparex Thermostatic Switch | Sparex Part No.S.106621
Thermostatic Switch | Sparex Part No. S.106621 Enhance the performance of your machinery with the high-quality Thermostatic Switch from Sparex. Designed for precision and reliability, this variable thermostatic switch is an essential component for maintaining optimal temperature control in your equipment. Product Specifications Brand: Sparex Capillary Length: 62 inches Related Products: 106721 Tariff Code: 8708991055 Type: Variable Compatibility Information This thermostatic switch is compatible with a wide range of Massey Ferguson models, including: 4225 4235 4245 4255 4270 5455 5465 6110 6120 6130 6140 6150 6160 6170 6180 6190 6235 6245 6255 6270 6290 6465 6475 6480 6485 6490 6495 8110 8120 8130 8140 8150 8160 8170 8180 8210 8220 8240 8250 8260 8270 8280 Manufacturer Information This product is manufactured by Massey Ferguson and is identified by the following OEM part numbers: 3902701M92 3902701M91 390701M92 Upgrade your equipment with the reliable Thermostatic Switch from Sparex, ensuring efficient operation and longevity for your Massey Ferguson machinery.
€40,95
Sparex Tapered Small End Bush - ID: 38.12mm | Sparex Part No.S.111790
Tapered Small End Bush - ID: 38.12mm | Sparex Part No. S.111790 Enhance the performance of your machinery with the Tapered Small End Bush from Sparex. Designed for durability and precision, this bush is an essential component for various engine models. Product Specifications Brand: Sparex Inner Diameter (Ø): 38.12 mm Lubrication Hole: Yes Outer Diameter (Ø): 42.27 mm Overall Length: 32.65 mm Overall Length Taper: 20.95 mm Perkins Engine Family Type Codes: DJ, DK, DF, DG, DC, DD, DE, XK, XL, XM, RR, RS, RT, RE, RG, RJ, RF, RH, RK, NK, NL, NM, NH, NJ, VK Tariff Code: 8483308090 Wall Thickness: 2.075 mm Compatibility Information This tapered bush is suitable for a wide range of models: Landini: 5-100H, 5-110H, 5-115H, 5-80H, 5-90H, 7860, 8860, GHIBLI 105, GHIBLI 85, GHIBLI 95, GLOBALFARM 100, GLOBALFARM 105, GLOBALFARM 80, GLOBALFARM 90, GLOBALFARM 95, LANDPOWER 145, LANDPOWER 165, LEGEND 145, LEGEND 160, LEGEND 165, MYTHOS 105, MYTHOS 115, POWERFARM 100, POWERFARM 105, POWERFARM 110, POWERFARM 60, POWERFARM 75, POWERFARM 80, POWERFARM 85, POWERFARM 90, POWERFARM 95, POWERMONDIAL 100, POWERMONDIAL 105, POWERMONDIAL 110, POWERMONDIAL 115, POWERMONDIAL 120, POWERMONDIAL 95, REX 100, REX 105, REX 110, REX 120, REX 60, REX 65, REX 70, REX 75, REX 80, REX 85, REX 90, REX 95, SUPER 7865, SUPER 8865, TECHNOFARM 60, TECHNOFARM 65, TECHNOFARM 70, TECHNOFARM 75, TECHNOFARM 80, TECHNOFARM 85, TREKKER 100, TREKKER 105, TREKKER 75, TREKKER 80, TREKKER 85, TREKKER 90, TREKKER 95, VISION 100, VISION 105, VISION 85, VISION 95 Massey Ferguson: 275, 283 BRAZILIAN, 290, 3425, 3435, 3445, 3455, 375E BRAZILIAN, 390E BRAZILIAN, 410 UZEL, 420 UZEL, 4245, 4255, 4265, 430 UZEL, 4325, 4335, 4345, 4355, 4360, 4365, 4370, 440 XTRA BRAZILIAN, 460 XTRA BRAZILIAN, 481 BRAZILIAN, 492 BRAZILIAN, 5410, 5420, 5425, 5430, 5435, 5440, 5445, 5450, 5455, 5460, 5460SA, 5465, 6445, 6455, 6460, 6465, 6470, 6475, 6480, 7465, 7475, 7480, 8925, 8926, 89410, 8947 McCormick: B100 MAX, B105 MAX, B80 MAX, B90 MAX, B95 MAX, C100 MAX, C105 MAX, C110 MAX, C60 L, C60 L EUROPA, C60 MAX, C65 L, C65 L EUROPA, C70 L, C70 L EUROPA, C75 L, C75 L EUROPA, C75 MAX, C80 L, C80 L EUROPA, C80 MAX, C85 L EUROPA, C85 L MONDIAL, C85 MAX, C90 MAX, C95 MAX, CX100, CX105, CX110, CX90, F100, F105, F110, F120, F60, F65, F70, F75, F80, F85, F90, F95, MB55, MB75, MB85, MC105, MC110, MC115, T100, T100 MAX, T105, T110 MAX, T115 MAX, T70, T75, T80, T80 MAX, T85, T90, T90 MAX, T95, V60, V65, V70, V75, V80, V85, V90, X60.20, X60.30, X60.40 Perkins: 1103A-33 (DJ), 1103A-33T (DK), 1103B-33 (DF), 1103B-33T (DG), 1103C-33 (DC), 1103C-33T (DD), 1103C-33TA (DE), 1103D-33 (XK), 1103D-33T (XL), 1103D-33TA (XM), 1104A-44 (RR), 1104A-44T (RS), 1104A-44TA (RT), 1104C-44 (RE), 1104C-44T (RG), 1104C-44TA (RJ), 1104C-E44 (RF), 1104C-E44T (RH), 1104C-E44TA (RK), 1104D-44 (NK), 1104D-44T (NL), 1104D-44TA (NM), 1104D-E44T (NH), 1104D-E44TA (NJ), 1106C-E60TA (VK), 1106D-E66TA (PJ) Manufacturer Information OEM Fitment Information: Landini: 3112A005 Massey Ferguson: 4224827M1 McCormick: 708182A1 Perkins: 3112A005 Upgrade your equipment with the reliable and high-quality Tapered Small End Bush from Sparex, ensuring optimal performance and longevity for your machinery.
€4,95
Sparex Starter Motor - 12V, 4.2Kw, Gear Reducted (Mahle) | Sparex Part No.S.127861
Starter Motor - 12V, 4.2Kw, Gear Reduced (Mahle) | Sparex Part No. S.127861 Product Specifications A (mm): 127 a Angle (°): 45 Alternative to: 150754 B (mm): 89 Bell Opening: LH Brand: Mahle C (mm): 32.5 D (mm): 39.6 Distance Between Teeth (mm): 15.4 E (mm): 10.9 Fitting: 3 Hole Flange - LH Opening Gear Reduced: Yes Height (mm): 149.2 Kilowatts: 4.2 Length (mm): 387.4 Length from Front Mounting Face to Rear (mm): 240 Mounting Hole (mm): 10.9 Number of Flange Holes: 3 Number of Teeth: 10 Outer Diameter of Battery Terminal (mm): 9.8 Tariff Code: 8511400090 Volts: 12V Suitable For Information This starter motor is compatible with a variety of machinery, including: Case IH / International Harvester: C50, C60, C70, C90, CX50, CX60, CX80, CX90, MX100C, MX80C, MX90C JCB: 3CX 4 Landini: 6000, 7000, C6000, LEGEND 105, LEGEND 115, LEGEND 130, LEGEND 145, LEGEND 165, MYTHOS 110 Massey Ferguson: 1200, 3085, 3095, 3115, 3120, 3125, 3140, 3635, 3640, 3645, 3655, 3660, 3680, 5365 BRAZILIAN, 5410, 5420, 5425, 5430, 5435, 5440, 5445, 5450, 5455, 5460, 5465, 5470, 5475, 5480, 5650, 6160, 6170, 6180, 6190, 6260, 6270, 6280, 6290, 6445, 6455, 6460, 6465, 6470, 6475, 6480, 6485, 6490, 6495, 6497, 6499, 660, 6612 DYNA 4, 6613 DYNA 4, 6613 DYNA 6, 6614 DYNA 6, 6614 DYNA VT, 6615 DYNA 4, 6615 DYNA 6, 6615 DYNA VT, 6616 DYNA 6, 6616 DYNA VT, 680 BRAZILIAN, 7465, 7475, 7480, 7485, 7485 DYNA VT/DYNA STEP, 7490, 7495, 7497, 7499, 7614 DYNA 4, 7615 DYNA 4, 7615 DYNA 6, 7615 DYNA VT/DYNA STEP, 7616 DYNA 6, 7616 DYNA VT/DYNA STEP, 7618 DYNA 6, 7618 DYNA VT/DYNA STEP, 7619 DYNA 6, 7619 DYNA VT, 7620 DYNA 6, 7620 DYNA VT, 7622 DYNA 6, 7622 DYNA VT, 7624 DYNA 6, 7624 DYNA VT, 7626 DYNA 6, 8110, 8120, 8130, 8140, 8150, 8160, 8170, 8180, 8210, 8220, 8240, 8250, 8260, 8270, 8280, 8450, 8460, 8470, 8480, 8925, 8926 McCormick: CX50, CX60, MC130 Perkins: A4.236 Manufacturer Information This starter motor is manufactured by: Bosch: 986018151, Case IH / International Harvester 388187A1, 73326810, 6106496M92 HELLA LTD: 8EA730209-001, 8EA730219-001, CS693, CS703 Iskra: IS1160 JCB: 714/29300R Landini: 3648190M91, 3551773M91 Lester: 17649 Lucas: LRS00195, LRS00124, 27588, 27570, NSB529, NSB524, LRS00161, LRS00968, 27518, 27520 Magnetimar: 943227518, 63227596, 63227478, 63227520, 63227518, 943252076, 943226294, 943226366, 943227502, 943227520, 63296357, 54293284, 63227486, 943227570, 943227572, 943227524, 943252075, MSN191, MSN180, 943226357, 943226329, 943226348, 63227585, 63227588 Massey Ferguson: 3648190M91, 3667040M91, 3777247M1, 3823621M95, 3823621M96, 3823621M93, 3823621M91, 3823621M94 McCormick: 6106496M92, 388187A1 Perkins: 2873001, 3581576R1, 2873B056, 2873B071, 3581576M1, 1446802M91, 1447732M1, 1447732R1, 2873A102, 2873A030
€310,95
Sparex Starter Motor - 12V, 3.2Kw, Gear Reducted (Mahle) | Sparex Part No.S.127859
Starter Motor - 12V, 3.2Kw, Gear Reduced (Mahle) | Sparex Part No. S.127859 Upgrade your machinery with the high-performance Starter Motor from Mahle. Designed for reliability and efficiency, this 12V, 3.2Kw gear-reduced starter motor is perfect for a variety of agricultural and construction applications. Product Specifications A (mm): 127 a Angle (°): -42 Alternative to: 36213 B (mm): 89 Bell Opening: RH Brand: Mahle C (mm): 32.5 D (mm): 39.6 Distance Between Teeth (mm): 15.4 E (mm): 10.9 Fitting: 3 Hole Flange - RH Opening Gear Reduced: Yes Height (mm): 152.4 Kilowatts: 3.2 Length (mm): 304.8 Length from Front Mounting Face to Rear (mm): 238 Mounting Hole (mm): 10.9 Number of Flange Holes: 3 Number of Teeth: 10 Outer Diameter of Battery Terminal (mm): 7.8 Tariff Code: 8511400090 Volts: 12V Suitable For This starter motor is compatible with a wide range of machinery, including: Case IH / International Harvester: 475, C70, C80, C90, CX100, CX70, CX80, CX90, MX100C, MX80C, MX90C JCB: 185 ROBOT, 2CX, 3C, 3CX, 3D, 409, 411, 416, 4C, 4CX, 520, 525, 530, 540, 926, 930, 940 Landini: 4560, 5560, 5860, 6000, ADVANTAGE 55, ADVANTAGE 60 Massey Ferguson: 10, 1004, 1104, 135, 145, 250, 3060, 540, 620, 820 McCormick: F60, V60, V65 Renault: 601-4 Steyr: M958 Manufacturer Information This starter motor is manufactured by leading brands, ensuring quality and compatibility: AC Delco: DRS3333, DRS3769, DRS3287 AGCO: 3763362M94 Bosch: 986023190, 9000143416, 1367040 HELLA LTD: CS1033, 8EA737250-001 Hitachi: S13-73, S13-74 Iskra: IS1378 Lester: 32560, 18482, 18919 Lucas: LRS00519, LRS00173, NSB540 Magnetimar: 63227477, 63227523 Massey Ferguson: 1860093M2, 1868287T Perkins: 2873B072, 2873B055 Renault: 7701031686, 6005003154 Ursus: 7017954M1 Choose the Starter Motor - 12V, 3.2Kw, Gear Reduced (Mahle) for dependable performance and compatibility with a wide range of machinery. Order now to ensure your equipment runs smoothly!
€389,95
Sparex Starter Motor - 12V, 4.2Kw, Gear Reducted (Mahle) | Sparex Part No.S.137297
Starter Motor - 12V, 4.2Kw, Gear Reduced (Mahle) Product Specifications A (mm): 127 a Angle (°): 45 B (mm): 89 Bell Opening: LH Brand: Mahle C (mm): 32.5 D (mm): 39.6 Distance Between Teeth (mm): 15.4 E (mm): 10.9 Fitting: 3 Hole Flange - LH Opening Gear Reduced: Yes Height (mm): 152.4 Kilowatts: 4.2 Length (mm): 381 Length from Front Mounting Face to Rear (mm): 240 Mounting Hole (mm): 10.9 Number of Flange Holes: 3 Number of Teeth: 10 Outer Diameter of Battery Terminal (mm): 9.8 Related Products: 38018 Tariff Code: 8511400090 Volts: 12V Suitable For Information This starter motor is compatible with a wide range of Massey Ferguson models, including: 5460, 5460SA, 5465, 5470, 5475, 5480 6460, 6465, 6470, 6475, 6480, 6485 6490, 6495, 6497, 6499 6612 DYNA 4, 6613 DYNA 4, 6613 DYNA 6 6614 DYNA 6, 6614 DYNA VT, 6615 DYNA 4 6615 DYNA 6, 6615 DYNA VT, 6616 DYNA 6 6616 DYNA VT, 7465, 7475, 7480, 7485 7485 DYNA VT/DYNA STEP, 7490, 7495 7614 DYNA 4, 7615 DYNA 4, 7615 DYNA 6 7615 DYNA VT/DYNA STEP, 7616 DYNA 6 7616 DYNA VT/DYNA STEP, 7618 DYNA 6 7618 DYNA VT/DYNA STEP, 7619 DYNA 6 7619 DYNA VT, 7620 DYNA 6, 7620 DYNA VT 7622 DYNA 6, 7622 DYNA VT, 7624 DYNA 6 7624 DYNA VT, 7626 DYNA 6, 8240, 8250 8260, 8270, 8280 Also suitable for Valmet & Valtra models S293 and S353. Manufacturer Information Manufactured by Iskra, this starter motor is identified by the OEM part numbers: Massey Ferguson: 3786094M94, 3823621M91, 382361M94, 3823621M93, 3786094M93, 3784889M2, 3823621M95, 3823621M96, 3784890M1, 1072559, 1029405, 836667507 Valmet & Valtra: V836667507 Product Supplier: Sparex Product Type: Starter Motor Product SKU: SP-137297
€402,95
Sparex Starter Motor - 12V, 4.2Kw (Sparex) | Sparex Part No.S.150754
Starter Motor - 12V, 4.2Kw (Sparex) | Sparex Part No.S.150754 This Sparex Starter Motor is a powerful and reliable replacement for your Challenger or Massey Ferguson tractor. It features a 12V, 4.2Kw motor with a clockwise rotation and a 3-hole flange fitting with a left-hand opening. Product Specifications Alternative to: 127861 Bell Opening: LH Brand: Sparex C (mm): 30 Earth Stud: Yes erp_hazardous: No Fitting: 3 Hole Flange - LH Opening Kilowatts: 4.2 Length from Front Mounting Face to Rear mm: 245 Mounting Hole mm: 11 Number of Flange Holes: 3 Number of Teeth:: 10 Rotation: Clockwise Tariff Code:8511400090 Volts: 12V Suitable For This starter motor is compatible with the following Challenger and Massey Ferguson models: Challenger MT475B MT485D MT515D MT515E MT525B MT525D MT535B MT535D MT545B MT545D MT545E MT555D MT565D MT575D MT585D MT595D Massey Ferguson 5460 5465 5470 5475 5480 6460 6465 6470 6475 6480 6612 DYNA 4 6613 DYNA 4 6613 DYNA 6 6614 DYNA 6 6614 DYNA VT 6615 DYNA 4 6615 DYNA 6 6615 DYNA VT 6616 DYNA 6 6616 DYNA VT 6712 S DYNA 4 6713 S DYNA 4 6713 S DYNA 6 6713 S DYNA VT 6714 S DYNA 4 6714 S DYNA 6 6714 S DYNA VT 6715 S DYNA 4 6715 S DYNA 6 6715 S DYNA VT 6716 S DYNA 6 6716 S DYNA VT 6718 S DYNA 6 6718 S DYNA VT 7475 7480 7614 DYNA 4 7615 DYNA 4 7615 DYNA 6 7615 DYNA VT/DYNA STEP 7616 DYNA 6 7616 DYNA VT/DYNA STEP 7618 DYNA 6 7618 DYNA VT/DYNA STEP 7619 DYNA 6 7619 DYNA VT 7620 DYNA 6 7620 DYNA VT 7622 DYNA 6 7622 DYNA VT 7624 DYNA 6 7624 DYNA VT 7626 DYNA 6 7714 DYNA 4 7714 S DYNA 4 7715 DYNA 4 7715 DYNA 6 7715 DYNA VT 7715 S DYNA 4 7715 S DYNA 6 7715 S DYNA VT 7716 DYNA 6 7716 DYNA VT 7716 S DYNA 6 7716 S DYNA VT 7718 DYNA 6 7718 DYNA VT 7718 S DYNA 6 7718 S DYNA VT 7719 DYNA 6 7719 DYNA VT 7719 S DYNA VT 7720 DYNA VT 7720 S DYNA VT 7722 DYNA VT 7722 S DYNA VT 7724 DYNA VT 7724 S DYNA VT 7726 DYNA VT 7726 S DYNA VT Manufacture Information This Sparex starter motor is a direct replacement for the following Massey Ferguson OEM parts: 3784890M1 3823621M91 3823621M96
€289,95
Sparex Stabiliser - S.150419
Sparex Stabilizer - S.150419 This Sparex Stabilizer is a high-quality replacement part designed for a variety of Massey Ferguson tractors. It features a robust construction and precise dimensions to ensure a perfect fit and reliable performance. Key Features: Minimum Length: 440mm (17 21/64 inches) Maximum Length: 585mm (23 1/32 inches) Ball Size: 25.4mm (1 inch) Ball Width: 51mm (2 inches) Thread Size: M30x3.5 (Metric) Pin Diameter: 24mm (15/16 inch) Tube Length: 318mm Suitable For: This stabilizer is compatible with a wide range of Massey Ferguson tractors, including: 3050, 3055, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095 3115, 3120, 3125, 3140, 3610, 3630, 3635, 3645, 3650, 3655 3670, 3680, 3690, 5425, 5430, 5435, 5440, 5445, 5450, 5455 5460, 5465, 5470, 5475, 5480, 6110, 6120, 6130, 6140, 6150 6160, 6170, 6180, 6190, 6235, 6245, 6255, 6260, 6265, 6270 6280, 6290, 6445, 6455, 6460, 6465, 6470, 6475, 6480, 6485 6490, 6495, 6497, 6499, 6S.135 DYNA 6, 6S.145 DYNA 6, 6S.155 DYNA 6 6S.165 DYNA 6, 6S.180 DYNA 6, 7S.155 DYNA 6, 7S.165 DYNA 6, 7S.180 DYNA 6 8110, 8120, 8130, 8140, 8150, 8160, 8170, 8180, 8210, 8220 8240, 8250, 8260, 8270, 8280 Manufacturer Information: This Sparex stabilizer is a direct replacement for the following Massey Ferguson OEM parts: 3615707M91 3615707M92 7700061824 3615707M93 71818748 3794474M91 3794419M91 3716775M1 3716608M1 Order your Sparex Stabilizer today and ensure your Massey Ferguson tractor is running smoothly!
€155,95
Sparex Starter Motor - 12V, 3.2Kw, Gear Reducted (Mahle) | Sparex Part No.S.127860
Starter Motor - 12V, 3.2Kw, Gear Reduced (Mahle) Product Specifications A (mm): 127 a Angle (°): 50 B (mm): 89 Bell Opening: LH Brand: Mahle C (mm): 32.5 D (mm): 39.6 Distance Between Teeth (mm): 14.4 E (mm): 10.9 Fitting: 3 Hole Flange - LH Opening Gear Reduced: Yes Height (mm): 146.1 Kilowatts: 3.2 Length (mm): 387.4 Length from Front Mounting Face to Rear (mm): 225 Mounting Hole (mm): 10.9 Number of Flange Holes: 3 Number of Teeth: 10 Outer Diameter of Battery Terminal (mm): 7.8 Tariff Code: 8511400090 Volts: 12V Suitable For This starter motor is compatible with a range of Massey Ferguson models including: 5465 5470 5470 SA 5475 SA 6260 6270 6280 6290 6465 6475 6480 6485 6490 6495 6497 6499 7465 7475 7480 7485 7485 DYNA VT/DYNA STEP 7490 7495 8210 8220 8240 8250 8925 8926 Manufacturer Information This starter motor is also suitable for various OEM applications, including: Caterpillar: 3127539, 3575202, 2253148 Claas: 0011445780, 11445780 Iskra: IS1195 Lester: 18941 Lucas: LRS02206 Magnetimar: MSN8040, 63280040 Massey Ferguson: 3823621M91, 3784890M1, 3784889M2 Perkins: 2873K404, 2873K621, 2873K632, 3575202, 3586847
€426,95
Sparex Starter Motor - 12V, 3Kw, Gear Reducted (Mahle) | Sparex Part No.S.36200
Starter Motor - 12V, 3Kw, Gear Reduced (Mahle) | Sparex Part No. S.36200 Product Specifications A (mm): 127 a Angle (°): 45 B (mm): 89 Bell Opening: LH Brand: Mahle C (mm): 32.5 D (mm): 39.6 Distance Between Teeth (mm): 15.4 E (mm): 10.9 Fitting: 3 Hole Flange - LH Opening Gear Reduced: Yes Height (mm): 152.4 Kilowatts: 3 Length (mm): 390.5 Length from Front Mounting Face to Rear (mm): 240 Mounting Hole (mm): 10.9 Number of Flange Holes: 3 Number of Teeth: 10 Outer Diameter of Battery Terminal (mm): 9.8 Related Products: 38018 Tariff Code: 8511400090 Volts: 12V Suitable For This starter motor is compatible with various models, including: Landini: LEGEND 125, LEGEND 130, LEGEND 135, LEGEND 145, LEGEND 160, LEGEND 165, LEGEND 185 Massey Ferguson: 5465, 6260, 6270, 6280, 6290, 6465, 7475, 7480, 8210, 8220, 8240, 8250, 8260 McCormick: G115 MAX, G130 MAX, G160 MAX Manufacturer Information This product is manufactured by leading brands, including: AGCO: 1029405, 3823621M92, 3823621M95, 3786094M93, 1072559, 3784890M1, 3786094M94 Argo: 3667040M91, 3680133M91 Iskra: IS1071 Landini: 3667040M91, 3823621M94, 3680133M91, 3784889M2, 2873K404, 2873K621 Lester: 18941 Massey Ferguson: 4226826M91, 3823621M93, 3823621M94, 3823621M91, 3784890M1, 3784889M2, 4225352M91, 2873K404 McCormick: 3667040M91, 3784889M2
€393,95
Sparex Stabiliser - S.150416
Sparex Stabiliser - S.150416 This Sparex Stabiliser is a high-quality replacement part for a variety of Massey Ferguson tractors. It features a durable construction and is designed to provide reliable performance. Key Features: Minimum Length: 450mm (17 23/32 inches) Maximum Length: 650mm (25 19/32 inches) Ball Size: 25.4mm (1 inch) Ball Width: 51mm (2 inches) Pin Diameter: 24mm (15/16 inch) Thread Size: M27x3 Thread Type: Metric Tube Length: 330mm Suitable For: This stabiliser is compatible with the following Massey Ferguson tractor models: 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3095 3115, 3120, 3125, 3140, 3635, 3655, 3670, 3680, 3690 5425, 5435, 5445, 5455, 5460, 5465, 6110, 6120, 6130 6140, 6150, 6160, 6170, 6180, 6190, 6235, 6245, 6255 6260, 6265, 6270, 6280, 6290, 6445, 6455, 6460, 6465 6475, 6480, 6485, 6490, 6495, 6497, 6499, 6S.135 DYNA 6 6S.145 DYNA 6, 6S.155 DYNA 6, 6S.165 DYNA 6, 6S.180 DYNA 6 7S.155 DYNA 6, 7S.165 DYNA 6, 7S.180 DYNA 6, 8110, 8120, 8130 8140, 8150, 8160, 8210, 8220, 8240, 8250 Manufacturer Information: This Sparex Stabiliser is a high-quality replacement part for Massey Ferguson tractors. It is manufactured to meet or exceed OEM specifications. OEM Part Numbers: 3615707M91, 3615707M92, 3615707M93, 7700061824, 3794419M91, 3794474M91, 71818748 Order your Sparex Stabiliser today and keep your Massey Ferguson tractor running smoothly!
€116,95
Sparex Sparex Deep Groove Ball Bearing (6011) - S.40805
Sparex Deep Groove Ball Bearing (6011) - S.40805 Dimensions: Inner Diameter (ID): 55mm Outer Diameter (OD): 90mm Width: 18mm Product Specifications Alternative to: 18011 Bearing Reference: 6011 Bearing Type: Deep Groove Brand: Sparex Inner Ø: 55mm Outer Ø: 90mm Seal Type: Open Tariff Code: 8482200000 Width: 18mm Metric or Imperial: Metric Compatible With: Landini: 5830 Massey Ferguson: 1004, 1004T, 1080, 1085, 1200, 1250, 133, 135, 135 GAS / 135 PETROL, 140, 145, 148, 152, 155, 158, 165, 168, 185, 188, 20, 20C, 20D, 20E, 20F, 230, 230 US BUILT, 231, 235, 240, 245, 250, 253, 255, 260, 261, 265, 265 S (TR), 270, 275, 282, 282 US BUILT, 283, 285 (FR), 285 S (TR), 285 US BUILT, 290, 290 US BUILT, 298, 30, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 30B, 30D, 30E, 31, 3115, 3120, 3125, 3140, 340, 342, 350, 352, 355, 360, 362, 365, 372, 375, 375E BRAZILIAN, 382, 383, 390, 390E BRAZILIAN, 390T, 398, 399, 40, 40B, 40E, 50, 50C, 50D, 50E, 5425, 5435, 5445, 5455, 5460, 5465, 550, 560, 565, 575, 590, 592, 595, 6120, 6130, 6140, 6150, 6160, 6170, 6180, 6190, 6235, 6245, 6255, 6260, 6265, 6270, 6280, 6290, 6445, 6455, 6460, 6465, 6470, 6475, 6480, 670, 675, 690, 698, 698T, 699 Zetor: 10011, 10045, 10111, 10145, 10211, 10245, 11211, 11245, 12011, 12045, 12111, 12145, 12211, 12245, 14145, 14245, 16045, 16145, 16245, 8011, 8045, 8111, 8145, 8211, 8245, 9111, 9145, 9211, 9245, CRYSTAL 10011, CRYSTAL 10045, CRYSTAL 10145, CRYSTAL 12011, CRYSTAL 12045, CRYSTAL 12111, CRYSTAL 12145, CRYSTAL 16045, CRYSTAL 8011, CRYSTAL 8045, CRYSTAL 8111, CRYSTAL 8145 Manufacturer Information Bearing Reference: 6011 Compatible with: Howard: 255090181 Kubota: 8101-06011 Landini: 834218M1, 391261X1 Massey Ferguson: 834218M1, 834218V1, 391261X1, 3704932M1 Zetor: 971012
€7,95
AGCO AGCO | Shock Absorber - F930500030070
Fitment Information Fits Fendt Models309 Vario, 310 Vario, 311 Vario, 312 Vario, FARMER 309 C, FARMER 304 LS, FARMER 308 LS, FARMER 309 LS, FARMER 307 LSA, FARMER 308 LSA, FARMER 309 LSA, FARMER 310 LSA, FARMER 311 LSA, FARMER 312 LSA, Farmer 307 C, Farmer 308 C, Farmer 409 Vario, Farmer 410 Vario, Farmer 411 Vario, Farmer 412 Vario, 411 Vario, 412 Vario, 413 Vario, 414 Vario, 415 Vario, FAVORIT 816, FAVORIT 818, FAVORIT 822, FAVORIT 824, XYLON 520, XYLON 522, XYLON 524, 370 GT, 380 GTA TURBO, F345 GT, F360 GT, F365 GT, F370 GT, F380 GT, F390 GT, F395 GT, 712 Vario, 714 Vario, 716 Vario, 718 Vario, FAVORIT 509 C, FAVORIT 510 C, FAVORIT 511 C, FAVORIT 512 C, FAVORIT 514 C, FAVORIT 515 C, FAVORIT 711 VARIO, 716 Vario T2, Favorit 916 Vario, Favorit 920 Vario, Favorit 924 Vario, Favorit 926 Vario, 930 Vario TMS, 818 Vario, 820 VarioFits Massey Ferguson ModelsMF 6110 2WD, MF 6110 4WD, MF 6120 2WD, MF 6120 4WD, MF 6130 2WD, MF 6130 4WD, MF 6140 2WD, MF 6140 4WD, MF 6150 2WD, MF 6150 4WD, MF 6160 2WD, MF 6160 4WD, MF 6170 2WD, MF 6170 4WD, MF 6180 2WD, MF 6180 4WD, MF 6190 2WD, MF 6190 4WD, MF 8170 4WD, MF 8110 2WD, MF 8110 4WD, MF 8120 2WD, MF 8120 4WD, MF 8130 2WD, MF 8130 4WD, MF 8140 2WD, MF 8140 4WD, MF 8150 2WD, MF 8150 4WD, MF 8160 2WD, MF 8160 4WD, MF 4315 2WD, MF 4315 4WD, MF 4325 2WD, MF 4325 4WD, MF 4335 2WD, MF 4335 4WD, MF 4345 2WD, MF 4345 4WD, MF 4355 2WD, MF 4355 4WD, MF 4360 2WD, MF 4360 4WD, MF 4365 2WD, MF 4365 4WD, MF 4370 2WD, MF 4370 4WD, MF 4215 2WD, MF 4215 4WD, MF 4220 2WD, MF 4220 4WD, MF 4225 2WD, MF 4225 4WD, MF 4235 2WD, MF 4235 4WD, MF 4240 2WD, MF 4245 2WD, MF 4245 4WD, MF 4255 2WD, MF 4255 4WD, MF 4260 2WD, MF 4260 4WD, MF 4265 2WD, MF 4270 2WD, MF 4270 4WD, MF 6290 2WD, MF 6290 4WD, MF 6280 2WD, MF 6280 4WD, MF 6270 2WD, MF 6270 4WD, MF 6265 2WD, MF 6265 4WD, MF 6260 2WD, MF 6260 4WD, MF 6255 2WD, MF 6255 4WD, MF 6245 2WD, MF 6245 4WD, MF 6235 2WD, MF 6235 4WD, MF 8260 4WD, MF 8250 2WD, MF 8250 4WD, MF 8280 4WD, MF 8270 4WD, MF 8260 2WD, MF 8240 2WD, MF 8240 4WD, MF 8220 2WD, MF 8220 4WD, MF 8210 2WD, MF 8210 4WD, MF 6497, MF 6499, MF 6465, MF 6475, MF 6480, MF 6490, MF 6495, MF 6485, MF 6445, MF 6455, MF 6460, MF 6470, MF 6497 XTRA, MF 6499 XTRA, 6485, MF 6490 T3, MF 6495 T3, MF 6470 T3, MF 6460 T3, 6465, MF 6475 T3, 6480, MF 6445 T3, MF 6455 T3, MF 6497 T3, MF 6499 T3, MF 7465, MF 7475, MF 7480, MF 7485, MF 7490, MF 7495, MF 7485 T3, MF 7490 T3, MF 7495 T3, MF 7497, MF 7499, MF 8460, MF 8470, MF 8480, MF 8450 XTRA, MF 8460 XTRA, MF 8470 XTRA, MF 8480 XTRA, MF 9690, MF 9790, MF 9895, MF 5445, MF 5455, 5460, 5465, MF 5425, MF 5435, MF 5470 T3, MF 5480 T3, MF 5465 T3, MF 5475 T3, MF 5460 SISU, MF 5445 T3, MF 5455 T3, MF 5410 T3, MF 5420 T3, MF 5430 T3, MF 5440 T3, MF 5450 T3Fits Valtra ModelsValtra Fitment Information Is Not Currently Available
€96,95
Sparex Seal Kit | Sparex Part No.S.43532
Seal Kit | Sparex Part No. S.43532 Enhance the performance and longevity of your machinery with the high-quality Seal Kit from Sparex. This essential component is designed to provide a reliable seal, ensuring optimal operation and preventing leaks in various agricultural equipment. Product Specifications Brand: Sparex Related Products: 34345, 34346, 34469, 34470, 34472, 34473, 34480, 344892, 34538, 42143, 42172, 42943, 43958, 119940, 149232 Tariff Code: 4016930090 Compatibility Information This Seal Kit is suitable for a wide range of machinery, including: Case IH / International Harvester: 1046, 1055, 1055XL, 1056, 1056XL, 1246, 1255, 1255XL, 1455, 1455XL, 1490, 353, 383, 423, 433, 440, 453, 523, 533, 540, 553, 624, 633, 640, 644, 654, 724, 733, 740, 743, 743XL, 744, 745, 745S, 745XL, 824, 833, 840, 844, 844S, 844XL, 845, 845XL, 856XL, 940, 946, 955, 955XL, 956, 956XL, C42, C55, C64, C70, CS68, CS75, CS78, CS86, CS94, JX100, JX100U, JX1060C, JX1070C, JX1075C, JX1095C, JX70U, JX80U, JX90U, MXM120, MXM130, MXM140 Challenger: MT425B, MT434, MT444, MT445B, MT454, MT455B, MT464, MT465B, MT476, MT525B, MT535B, MT545B, MT555B, MT565B Claas: DOMINATOR 108 S, DOMINATOR 108 SL Deutz-Fahr: D 10006, D 12006, D 13006, D 2506, D 3006, D 4006, D 4007, D 4507, D 4807, D 50 05, D 5207, D 60 05, D 6006, D 6007, D 6206, D 6207, D 6507, D 6806, D 6807, D 6907, D 7006, D 7007, D 7206, D 7207, D 7506, D 7606, D 7807, D 80 05, D 8006, D 8606, D 90 05, D 9006, DX 100, DX 110, DX 120, DX 130, DX 140, DX 145, DX 160, DX 230, DX 85, DX 86, DX 90, DX 92, DX3.10, DX3.10SC, DX3.30, DX3.30F, DX3.50, DX3.60, DX3.70, DX3.80, DX3.90, DX6.00, DX6.01, DX6.05, DX6.06, DX6.07, DX6.08, DX6.10, DX6.11, DX6.15, DX6.17, DX6.20, DX6.21, DX6.28, DX6.30, DX6.31, DX6.38, DX6.45, DX6.50, DX6.60, DX7.10, INTRAC 2002, INTRAC 2003, INTRAC 2004 Fendt: F 220 GT, F 231 GT, F 250 GT, F 255 GT, F 275 GT, F 275 GT II, F 345 GT, F 360, FARMER 1, FARMER 1 Z, FARMER 102, FARMER 103, FARMER 103 S, FARMER 104, FARMER 104 LS, FARMER 105, FARMER 106, FARMER 108, FARMER 108 S, FARMER 108 SL, FARMER 2, FARMER 2 D, FARMER 2 DE, FARMER 2 E, FARMER 200, FARMER 200 SA, FARMER 200 V, FARMER 203, FARMER 203 PA, FARMER 204, FARMER 204 P, FARMER 205, FARMER 205 P, FARMER 3, FARMER 3 S, FARMER 303, FARMER 303 A, FARMER 304, FARMER 305, FARMER 305 LS, FARMER 306, FARMER 307, FARMER 308, FARMER 309, FARMER 310, FARMER 311, FARMER 312, FARMER 312 LS, FARMER 4, FARMER 4 S, FARMER 5, FARMER 5 S, FAVORIT 10, FAVORIT 10 S, FAVORIT 11, FAVORIT 11 S, FAVORIT 12 S, FAVORIT 3, FAVORIT 4 S, FAVORIT 600, FAVORIT 600 LS, FAVORIT 610, FAVORIT 610 LS, FAVORIT 611, FAVORIT 611 LS, FAVORIT 611 LSA, FAVORIT 612, FAVORIT 612 LS, FAVORIT 612 LSA, FAVORIT 614, FAVORIT 614 LS, FAVORIT 614 LSA, FAVORIT 615, FAVORIT 615 LS, FAVORIT 615 LSA, XYLON 520, XYLON 522, XYLON 524 Fiat: 115-90, 130-90, 140-90, 160-90, 180-90, 45-76, 55-46, 55-66, 55-76, 55-88, 55-90, 60-46, 60-66, 60-75, 60-76, 60-88, 60-90, 65-46, 65-88, 65-90, 70-66, 70-66DT, 70-75, 70-76, 70-88, 70-90, 70-90DT, 80-66, 80-66DT, 80-75, 80-76, 80-88, 80-90, 80-90DT, F100, F110, F115, F120, F130, F140, L60, L65, L75, L85, L95, M100, M115, M135, M160 Ford / New Holland: 3000, 3300, 4230, 4410, 4635, 4835, 5635, 6635, 7635, 8160, 8260, 8360, 8430, 8560, 8630, TD55D, TD65D, TD75D, TD85D, TD95D, TL100, TL65, TL70, TL80, TL90, TM115, TM120, TM125, TM130, TM135, TM140, TM150, TM155, TM165, TM175, TM190, TN55, TN55D, TN55S, TN60A, TN60DA, TN60SA, TN65, TN65D, TN65F, TN65S, TN70, TN70A, TN70D, TN70DA, TN70F, TN70S, TN70SA, TN75, TN75A, TN75D, TN75DA, TN75F, TN75FA, TN75S, TN75SA, TN80F, TN85FA, TN90F, TN95A, TN95F, TN95FA JCB: 2D John Deere: 5720, 5820, 820, 920 Landini: 4560, 5560, 5860, 5870, 6060, 6070, 6500, 6530, 6560, 6860, 6870, 6880, 7500, 7530, 7560, 7860, 7870, 7880, 8500, 8530, 8560, 8860, 8880, 9080, 9880, BLIZZARD 50, BLIZZARD 60, BLIZZARD 65, BLIZZARD 75, BLIZZARD 85, BLIZZARD 95, REX 55, REX 60, REX 65, REX 75, REX 85, REX 95, TREKKER 55, TREKKER 70, TREKKER 75, TREKKER 85, TREKKER 95 Massey Ferguson: 1007, 174, 184, 194, 2640, 265, 265 S (TR), 275, 285 (FR), 285 S (TR), 290, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 3115, 3120, 3125, 3140, 353, 354, 356CF, 362, 363, 364, 365, 366CF, 372, 373, 374, 375, 375E BRAZILIAN, 377, 382, 383, 384, 390, 390E BRAZILIAN, 390T, 393, 394, 396, 397, 398, 399, 4215, 4220, 4225, 4235, 4240, 4245, 4255, 4260, 4265, 4270, 4315, 4320, 4325, 4335, 4345, 4355, 4360, 4365, 4370, 507, 5290, 5310 BRAZILIAN, 5335, 5335 BRAZILIAN, 5340, 5340 BRAZILIAN, 5355, 5355 BRAZILIAN, 5360, 5360 BRAZILIAN, 5365 BRAZILIAN, 5425, 5435, 5445, 5455, 5460, 5465, 6110, 6120, 6130, 6140, 6150, 6160, 6170, 6180, 6190, 6235, 6245, 6255, 6260, 6265, 6270, 6280, 6290, 6445, 6455, 6460, 6465, 6470, 6475, 6480, 6485, 6490, 6495, 7242 Mercedes Benz: 108SL Renault: ARES 540, ARES 546, ARES 550, ARES 556, ARES 566, ARES 610, ARES 616, ARES 620, ARES 626, ARES 630, ARES 636, ARES 640, ARES 696 Steyr: 360 KOMPAKT, 370 KOMPAKT, 375 KOMPAKT, 545, 548, 768, 8055 Manufacturer Information This Seal Kit is compatible with OEM part numbers from various manufacturers: Case IH / International Harvester: 4004/16261, 299681A1, 3230866R91, 155700750722, 09-100603, 3223964R91, 1416852, 1412014, 1397750702, 155700750701, 161100130713, 42481597, 80418849, J3749675, 920016512, X2849698, 4901/30000, E126697, 764058 Fiat: 79105410, 42481597, 920016512, 9960025 Ford / New Holland: 920016512, 79068048, 79105410, 80418849, 42481597, 418849, 9960025, 9957977 Massey Ferguson: 3100439M91, F279940050040, F716100490120, 3104971M91, 3904207M91 Ensure your equipment runs smoothly with the Sparex Seal Kit. Order now to maintain the efficiency and reliability of your machinery!
€25,95
AGCO AGCO | Sealing Washer - F411301021190
Fitment Information Fits Fendt Models207 Vario, 208 Vario, 209 Vario, 210 Vario, 211 Vario, 207 S Vario S3, 208 S Vario S3, 209 S Vario S3, 210 S Vario S3, 211 S Vario S3, 310 Vario S4, 311 Vario S4, 312 Vario S4, 313 Vario S4, 309 Vario, 310 Vario, 311 Vario, 312 Vario, FARMER 309 C, Farmer 307 C, Farmer 308 C, 309 Vario SCR, 310 Vario SCR, 311 Vario SCR, 312 Vario SCR, 313 Vario SCR, Farmer 409 Vario, Farmer 410 Vario, Farmer 411 Vario, Farmer 412 Vario, 411 Vario, 412 Vario, 413 Vario, 414 Vario, 415 Vario, 512 Vario S4, 513 Vario S4, 514 Vario S4, 516 Vario S4, XYLON 520, XYLON 522, XYLON 524, 512 Vario SCR, 513 Vario SCR, 514 Vario SCR, 516 Vario SCR, FAVORIT 711 VARIO, 712 Vario, Katana 65 S4, Katana 65Fits Massey Ferguson Models6465 Dyna-6, 6475 Dyna-6, MF 6445, MF 6455, MF 6460, MF 6470, MF 6470 T3, MF 6460 T3, 6465, MF 6475 T3, MF 6445 T3, MF 6455 T3, MF 7465 T3 SISU, MF 7475 T3 SISU, MF 5709 S Dyna-4, MF 5709 S Dyna-6, MF 5608 Dyna-4, MF 5609 Dyna-4, MF 5610 Dyna-4, MF 5611 Dyna-4, MF 5611 Dyna-6, MF 5612 Dyna-4, MF 5612 Dyna-6, MF 5613 Dyna-4, MF 5613 Dyna-6, MF 6612 Dyna-4, MF 6613 Dyna-6, MF 6613 Dyna-4, MF 6614 Dyna-VT, MF 6614 Dyna-6, MF 6615 Dyna-4, MF 6615 Dyna-6, MF 7614 Dyna-4, MF 7615 Dyna-VT, MF 7615 Dyna-6, MF 5709 SL Dyna-4, MF 5710 SL Dyna-4, MF 5710 SL Dyna-6, MF 5711 S Dyna-4, MF 5711 S Dyna-6, MF 5712 S Dyna-4, MF 5712 S Dyna-6, MF 5713 S Dyna-4, MF 5713 S Dyna-6, MF 6712 S Dyna-4, MF 6713 S Dyna-4, MF 6714 S Dyna-4 T4F, MF 6715 S Dyna-4 T4F, MF 6713 S Dyna-6, MF 6713 S Dyna-VT, MF 6714 S Dyna-6, MF 6714 S Dyna-VT, MF 6715 S Dyna-6 T4F, MF 6716 S Dyna-6 T4F, MF 6714 S Dyna-6 T4F, MF 6714 S Dyna-VT T4F, MF 7715 DYNA-4, MF 7716 Dyna-6, MF 7714 Dyna-4, MF6713 S Dyna-6 T5, MF 6713 S Dyna-VT T5, MF 6714 S Dyna-6 T5, MF 6714 S Dyna-VT T5, MF 6715 S Dyna-6 T5, MF 7714 S Dyna-4, MF 7714 S Dyna-4 T5, MF 7715 S Dyna-VT T5, MF 7715 S Dyna-6 T5, MF 7716 S Dyna-VT T5, MF 7716 S Dyna-6 T5, MF 5465 Dyna-4, MF 5475 Dyna-4, MF 5460 T3 SISU, 5475, 5470, 5460, MF 5470 T3, MF 5480 T3, MF 5465 T3, MF 5475 T3, MF 5470 SISU, MF 5410 T3, MF 5420 T3, MF 5430 T3, MF 5440 T3, MF 5450 T3Fits Valtra ModelsA74SH, N104H5, N114EH5, N124H5, N134H5, N154EH5, N174H5, N134A, N154EA, N174A, N134V, N154EV, N174V, N134D, N154ED, N174D, N104H5 MR18, N114EH5 MR18, N124H5 MR18, N134H5 MR18, N154EH5 MR18, N174H5 MR18, N134A MR18, N154EA MR18, N174A MR18, N134V SmartTouch, N154EV SmartTouch, N174V SmartTouch, N134D SmartTouch, N154ED SmartTouch, N174D SmartTouch
€142,95
Sparex Resistor for Blower Motor | Sparex Part No.S.129812
Resistor for Blower Motor | Sparex Part No. S.129812 Enhance the performance of your machinery with the Resistor for Blower Motor from Sparex. This high-quality component is designed to ensure optimal functionality and reliability in your equipment. Product Specifications Alternative to: 129811 Brand: Sparex Tariff Code: 8708299000 Compatibility Information This blower motor resistor is suitable for a wide range of Massey Ferguson models, including: 3625, 3635, 3640, 3645, 3650, 3655, 3660 5410, 5420, 5425, 5430, 5435, 5440, 5445, 5450, 5455, 5460, 5460SA, 5465 5470, 5475, 5480, 5608, 5609, 5610, 5611, 5612, 5613 6445, 6455, 6460, 6465, 6470, 6475, 6480, 6485, 6490, 6495, 6497, 6499 6612 DYNA 4, 6613 DYNA 4, 6613 DYNA 6, 6614 DYNA 6, 6614 DYNA VT 6615 DYNA 4, 6615 DYNA 6, 6615 DYNA VT, 6616 DYNA 6, 6616 DYNA VT 7465, 7475, 7480, 7485, 7485 DYNA VT/DYNA STEP, 7490, 7495, 7497, 7499 7614 DYNA 4, 7615 DYNA 4, 7615 DYNA 6, 7615 DYNA VT/DYNA STEP 7616 DYNA 6, 7616 DYNA VT/DYNA STEP, 7618 DYNA 6, 7618 DYNA VT/DYNA STEP 7619 DYNA 6, 7619 DYNA VT, 7620 DYNA 6, 7620 DYNA VT, 7622 DYNA 6 7622 DYNA VT, 7624 DYNA 6, 7624 DYNA VT, 7626 DYNA 6 Manufacturer Information This product is compatible with the following OEM part numbers: Massey Ferguson: 3904295M2, 3904295M3, 3904295M1, V37222400, VA403277 Valmet & Valtra: VA403277 Upgrade your equipment with the Resistor for Blower Motor and experience improved performance and reliability. Order now to ensure your machinery operates at its best!
€51,95
Sparex PTO Shield | Sparex Part No.S.41991
PTO Shield | Sparex Part No. S.41991 Product Overview The PTO Shield is an essential component designed to ensure the safe operation of your agricultural machinery. Manufactured by Sparex, this high-quality shield provides reliable protection for your PTO system, enhancing the longevity and performance of your equipment. Product Specifications Brand: Sparex Tariff Code: 8483908990 Compatibility Information This PTO Shield is compatible with a wide range of models, including: Landini 5830 Massey Ferguson models: 1004, 1004T, 1200, 1250, 133, 135, 135 GAS / 135 PETROL, 140, 145, 148, 152, 155, 158, 165, 168, 185, 188, 20, 20C, 20D, 20E, 20F, 230, 230 US BUILT, 231, 235, 240, 245, 250, 253, 255, 260, 261, 265, 270, 275, 282, 282 US BUILT, 283, 283 BRAZILIAN, 285 (FR), 290, 290 BRAZILIAN, 290 US BUILT, 298, 30, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 30B, 30D, 30E, 31, 3115, 3120, 3125, 3140, 340, 342, 350, 352, 355, 360, 362, 365, 372, 375, 375E BRAZILIAN, 382, 383, 390, 390E BRAZILIAN, 390T, 398, 399, 40, 40B, 40E, 50, 50C, 50D, 50E, 5425, 5435, 5445, 5455, 5460, 5465, 550, 565, 575, 590, 595, 6120, 6130, 6140, 6150, 6160, 6170, 6180, 6190, 6235, 6245, 6255, 6260, 6265, 6270, 6280, 6290, 6445, 6455, 6460, 6465, 6470, 6475, 6480, 670, 675, 690, 698, 698T, 699 Manufacturer Information Part Number: Massey Ferguson 533183M1 Ensure your machinery operates safely and efficiently with the Sparex PTO Shield. Order yours today!
€2,95
Sparex PTO Stub Shaft | Sparex Part No.S.74882
PTO Stub Shaft | Sparex Part No. S.74882 Upgrade your agricultural equipment with the high-quality PTO Shaft Stub featuring a robust 21 spline design. Manufactured by Spenco, this essential component ensures optimal performance and reliability for your machinery. Product Specifications Brand: Spenco Length: 11 1/4 inches (289 mm) Max. RPM: 1000 Splines: 21 Tariff Code: 8483102990 Compatibility Information This PTO Shaft Stub is compatible with a wide range of Massey Ferguson models, including: 3050 3060 3065 3070 3075 3080 3085 3090 3095 3115 3120 3125 5425 5435 5445 5455 5460 5465 6110 6120 6130 6140 6150 6160 6170 6180 6190 6235 6245 6255 6260 6265 6270 6280 6290 6445 6455 6460 6465 6470 6475 6480 Manufacturer Information Also compatible with Landini models: 3382072M7 3382072M5 3382072M6 And Massey Ferguson part numbers: 3382072M6 3382072M7 3382072M5
€248,95
Sparex PTO Shaft - S.74881
PTO Shaft - S.74881 Introducing the high-performance PTO Shaft from Spenco, designed for optimal efficiency and durability. With a maximum RPM of 540 and 6 splines, this PTO shaft is engineered to meet the demands of various agricultural machinery. Product Specifications Brand: Spenco Length: 11 1/4 inches (289 mm) Max. RPM: 540 Splines: 6 Tariff Code: 8483102990 Compatibility Information This PTO shaft is compatible with a range of Massey Ferguson models, including: 3050 3060 3065 3070 3075 3080 3085 3090 3095 3115 3120 3125 5425 5435 5445 5455 5460 5465 6110 6120 6130 6140 6150 6160 6170 6180 6190 6235 6245 6255 6260 6265 6270 6280 6290 6445 6455 6460 6465 6470 6475 6480 OEM Fitment Information This PTO shaft is designed to fit the following OEM part numbers: Landini: 3382073M5, 3382073M6, 3382073M7 Massey Ferguson: 3382073M5, 3382073M6, 3382073M7, 3382073M8, 3382073M9 Upgrade your machinery with the reliable and efficient PTO Shaft - S.74881 from Spenco, ensuring peak performance in your agricultural operations.
€358,95
Sparex PTO Shaft - S.43920
PTO Shaft - S.43920 Introducing the PTO Shaft - S.43920, a high-performance component designed for optimal efficiency and durability. Manufactured by Spenco, this PTO shaft is engineered to meet the rigorous demands of agricultural machinery. Key Features: Max. RPM: 540 Splines: 6 Tariff Code: 8483102990 Compatibility: This PTO shaft is specifically designed for Massey Ferguson models, ensuring a perfect fit for the following machines: 5425 5435 5445 5455 5460 5465 6130 6140 6150 6160 6170 6180 6190 6235 6245 6255 6260 6265 6270 6280 6290 6445 6455 6460 6465 6470 6475 6480 Upgrade your machinery with the reliable and efficient PTO Shaft - S.43920 from Sparex. Designed for seamless operation, this PTO shaft is the perfect choice for enhancing the performance of your Massey Ferguson equipment.
€212,95
Sparex PTO Shaft - S.260158
PTO Shaft - S.260158 Max RPM: 540 Splines: 1 3/8'' - 6 Spline Product Specifications Brand: Spenco Length: 287 mm Max RPM: 540 Spline A: 1 3/8'' - 6 Spline Spline B: 36 Tariff Code: 8483102990 Compatibility Information This PTO Shaft is suitable for the following Massey Ferguson models: 5425 5435 5445 5455 5460 5460SA 5465 5470 5475 5480 6235 6245 6255 6260 6265 6270 6280 6290 6445 6455 6460 6465 6470 6475 6480 6612 DYNA 4 6613 DYNA 4 6614 DYNA 6 6615 DYNA 4 6616 DYNA 6 7614 DYNA 4 7615 DYNA 4 7616 DYNA 6 7618 DYNA 6 Manufacturer Information OEM Part Number: Massey Ferguson 3382074M10
€209,95
Sparex PTO Shaft - S.260053
PTO Shaft - S.260053 Enhance the performance of your agricultural machinery with the high-quality PTO Shaft designed for optimal efficiency. This PTO shaft features a maximum RPM of 1000 and is equipped with 1 3/8'' - 21 Spline for reliable connectivity. Product Specifications Brand: Spenco Length: 116 mm Max. RPM: 1000 Splines: 1 3/8'' - 21 Spline Tariff Code: 8483102990 Compatibility Information This PTO shaft is suitable for a wide range of Massey Ferguson models, including: 4707, 4708, 4709 5410, 5420, 5425 5430, 5435, 5440 5445, 5450, 5455 5460, 5465, 5470 5475, 5480, 5609 5610, 5611, 5612 5613, 6445, 6455 6460, 6465, 6470 6475, 6480, 6612 DYNA 4 6613 DYNA 4, 6614 DYNA 6 6615 DYNA 4, 6616 DYNA 6 7614 DYNA 4, 7615 DYNA 4 7616 DYNA 6, 7618 DYNA 6 Manufacturer Information Manufactured by Massey Ferguson, this PTO shaft is identified by the OEM part number 3790903M2.
€259,95
Sparex PTO Cable - Length: 2366mm, Outer cable length: 2125mm. | Sparex Part No.S.103277
PTO Cable - Length: 2366mm, Outer Cable Length: 2125mm | Sparex Part No. S.103277 Upgrade your agricultural machinery with the high-quality PTO Cable from Sparex. Designed for durability and performance, this cable measures 2366mm in total length, with an outer cable length of 2125mm. Perfect for a variety of Massey Ferguson models, this PTO cable ensures reliable operation and seamless connectivity. Product Specifications Brand: Sparex Cable End (A): 12 Cable End (B): 12 Length (mm): 2366 Outer Cable Length (mm): 2125 Tariff Code: 8708991060 Compatibility Information This PTO cable is compatible with the following Massey Ferguson models: 5445 5455 5460 5465 5470 6110 6120 6130 6140 6150 6160 6170 6180 6190 6235 6245 6255 6260 6265 6270 6280 6290 6445 6455 6460 6465 6470 6475 6480 8110 8120 8130 Manufacturer Information Part Number: Massey Ferguson 3712990M2 Ensure your machinery operates at its best with the reliable and efficient Sparex PTO Cable. Order yours today!
€50,95
Sparex Piston Ring | Sparex Part No.S.110975
Piston Ring | Sparex Part No. S.110975 Enhance the performance of your engine with the Piston Ring designed specifically for a range of Sisu engines, including the 320D, DS, 320DE, 320DSRE, 420D, DS, 420DSRE, 420DW, 420DSI, 420DWRE, 420DWRIE, 620D, 620DS, 620DWR, and 620DWRE. Product Specifications Brand: Sparex Number of Rings: 3 Related Products: 110969 Ring Type: Top Ring: CK1 - Chrome Plated Keystone (2.80mm) 2nd Ring: P5 - Parallel Faced Plain (2.45mm) 3rd Ring: CBEH - Chrome Plated Bevelled Edge with Helical Coil Spring (4.00mm) Tariff Code: 8409990090 Compatibility Information This piston ring is compatible with various models from leading manufacturers: Case IH / International Harvester: CS100, CS105 PRO, CS110, CS120, CS130, CS150, CS85 PRO, CS94, CS95 PRO, CVX1155, CVX1170, CVX1190, CVX1195, CVX140, CVX150, CVX160, CVX170, CVX175, CVX195 Challenger: 647, 647 COMBINE, 648, 648 COMBINE, MT315B, MT325B, MT335B, MT345B, MT555B, MT565B, MT575B, MT585B, MT595B, MT645B Fendt: 5270 C, 6270 L Ford / New Holland: T7510, T7520, T7530, T7540, T7550, TVT155, TVT170, TVT190, TVT195 Massey Ferguson: 3615, 3625, 3635, 3645, 3655, 3670, 3690, 4435, 4445, 4455, 5465, 5470, 5475, 5480, 6460, 6465, 6470, 6475, 6480, 6485, 6490, 6495, 6497, 6499, 7250, 7252, 7254, 7256, 7260, 7465, 7475, 7480, 7485, 7485 DYNA VT/DYNA STEP, 7490, 7495, 7497, 7499, 8140, 8150, 8160, 8240, 8250, 8260, 8450, 8460 Sisu Diesel: 320DE, 320DS, 320DSRE, 420D, 420DS, 420DSI, 420DSRE, 420DW, 420DWRE, 420DWRIE, 620D, 620DS, 620DWR, 620DWRE Steyr: 6150CVT, 6155CVT, 6160CVT, 6170CVT, 6195CVT, 9085MT, 9095MT, 9105, 9105MT, 9115, 9125, 9145, CVT 150, CVT 170 Valmet & Valtra: 255, 355, 365, 455, 465, 555, 565, 600, 6000, 6100, 6250, 6250 HITECH, 6300, 6350, 6350 HITECH, 6400, 6550, 6550 HITECH, 6600, 665, 6650, 6650 HITECH, 6800, 6850, 6850 HITECH, 700, 800, 8000, 8050, 8100, 8150, 8350, 8350 HITECH, 8400, 8450, 8450 HITECH, 865, 8950 HITECH, 900 Manufacturer Information This product is compatible with OEM part numbers from various manufacturers: Case IH / International Harvester: 47106016, 162000030701 Challenger: 836640078 Fendt: 836640078 Ford / New Holland: 162000030701 Massey Ferguson: 836640078 Steyr: 47106016, 162000030701 Valmet & Valtra: 836640078
€43,95
Sparex Pin | Sparex Part No.S.107335
Pin | Sparex Part No. S.107335 Introducing the Sparex Pin, a reliable and essential component designed for optimal performance in various agricultural machinery. This 8-speed pin is engineered to meet the highest standards of quality and durability, ensuring seamless operation in your equipment. Product Specifications Brand: Sparex Tariff Code: 8708402090 Compatibility Information This Sparex Pin is suitable for a wide range of models, including: AGCO: LT75, LT75A, LT90A, RT140A Challenger: 425B, 445B, 455B Landini: 5830, 6030, 7830 Massey Ferguson: 1004, 1004T, 1080, 1085, 1200, 1250, 133, 135, 140, 145, 148, 152, 155, 158, 165, 168, 175, 178, 185, 188, 200, 230, 231, 235, 240, 243, 245, 250, 250 BRAZILIAN, 250X BRAZILIAN, 253, 255, 260, 261, 2625, 263, 2635, 265 BRAZILIAN, 270, 275 BRAZILIAN, 283 BRAZILIAN, 285 (FR), 290 BRAZILIAN, 292 BRAZILIAN, 297 BRAZILIAN, 298 BRAZILIAN, 299 BRAZILIAN, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 3115, 3120, 3125, 340, 342, 35, 35 GAS / 35 PETROL, 350, 352, 355, 360, 362, 3630, 365, 3650, 375, 375E BRAZILIAN, 390, 390E BRAZILIAN, 396, 399, 415 BRAZILIAN, 4225, 4235, 4245, 425 BRAZILIAN, 4255, 4260, 4265, 4270, 4325, 4335, 4345, 435 BRAZILIAN, 4355, 4360, 4365, 4370, 440 BRAZILIAN, 445 BRAZILIAN, 460 BRAZILIAN, 465 BRAZILIAN, 492 BRAZILIAN, 5355 BRAZILIAN, 5360 BRAZILIAN, 5365 BRAZILIAN, 5425, 5430, 5435, 5440, 5445, 5450, 5455, 5460, 5465, 5470, 5480, 550, 560, 565, 575, 590, 592, 595, 6120, 6130, 6140, 6150, 6160, 6170, 6180, 6190, 6235, 6245, 6255, 6260, 6265, 6270, 6280, 6290, 6445, 6455, 6460, 6465, 6470, 6475, 6480, 6485, 6490, 6495, 6497, 6499, 675, 690, 698, 699, 7465, 7475, 7480, 7490, 7495, 835, SUPER 90 Manufacturer Information This product is compatible with: Landini: 180409M1 Massey Ferguson: 180409M1 Ensure your machinery operates at its best with the Sparex Pin, a trusted choice for agricultural professionals.
€1,95
Sparex Outer Door Handle RH & LH | Sparex Part No.S.20913
Outer Door Handle RH & LH | Sparex Part No. S.20913 Upgrade your machinery with the high-quality Outer Door Handle designed for both left-hand (LH) and right-hand (RH) fittings. Manufactured by Sparex, this durable handle ensures reliable performance and a perfect fit for your Massey Ferguson equipment. Product Specifications Brand: Sparex Fitting: RH & LH Tariff Code: 8302300090 Compatibility Information This handle is suitable for a wide range of Massey Ferguson models, including: 5365 BRAZILIAN 5425 5435 5445 5455 5460 5465 6110 6120 6130 6140 6150 6160 6170 6180 6190 6235 6245 6255 6260 6265 6270 6280 6290 6445 6455 6460 6465 6470 6475 6480 6485 6490 6495 6497 6499 660 BRAZILIAN 680 BRAZILIAN 7465 7475 7480 7485 7485 DYNA VT/DYNA STEP 7490 7495 8110 8130 8140 8150 8160 8170 8180 8210 8220 8240 8250 8260 8270 8280 8450 8460 8470 8480 Manufacturer Information Part Number: 3902356M91 from Massey Ferguson
€135,95
Sparex O RingBSShore | Sparex Part No.S.42979
O'Ring - Brake | Sparex Part No. S.42979 Product Specifications Brand: Sparex Related Products: 168986, 168990, 168991, 168996, 169001, 169012, 169013, 169014, 169015, 169018, 169019 Tariff Code: 4016930090 Compatibility Information This O'Ring is designed for use with a variety of Massey Ferguson models, including: 3050 3060 3065 3075 3085 3095 3120 3125 3635 3645 3655 3670 3690 5425 5435 5445 5460 5465 6120 6130 6140 6150 6160 6170 6180 6190 6235 6255 6260 6265 6270 6280 6290 6445 6455 6460 6465 6470 6475 6480 8110 8120 8130 8140 8150 8160 Manufacturer Information This O'Ring is also compatible with Landini models: 3382189M1 3617901M1 3617902M2 Additionally, it fits the following Massey Ferguson parts: 3617902M3 3382189M1
€17,95
Sparex O RingBSShore | Sparex Part No.S.42980
O'Ring - Brake | Sparex Part No. S.42980 Product Specifications Brand: Sparex Related Products: 168986, 168990, 168991, 168996, 169001, 169012, 169013, 169014, 169015, 169018, 169019 Tariff Code: 4016930090 Compatibility Information This O'Ring is suitable for a wide range of Massey Ferguson models, including: 3050, 3060, 3065, 3075, 3085, 3095 3120, 3125, 3635, 3645, 3655, 3670, 3690 5425, 5435, 5445, 5455, 5460, 5465 6120, 6130, 6140, 6150, 6160, 6170, 6180, 6190 6235, 6245, 6255, 6260, 6265, 6270, 6280, 6290 6445, 6455, 6460, 6465, 6470, 6475, 6480 8110, 8120, 8130, 8140, 8150, 8160 Manufacturer Information This O'Ring is also compatible with Landini models: 3617902M2, 3617901M1, 3382190M1 Additionally, it fits the following Massey Ferguson parts: 3617901M2, 3382190M1
€5,95
JMCE *SPECIAL PRICE* - AGCO | Union - 378082X91
Fits Fendt Models 8370P, 8400P, 8380P, 8410P, 9300R, 9390R, 9470X, 9490X Fits Massey Ferguson Models MF 135, MF 165, MF 148, MF 168, MF 188, MF 560, MF 575 4WD, MF 590 4WD, MF 595, MF 595 4WD, MF 698, MF 698 4WD, MF 698T, MF 698T 4WD, MF 699, MF 699 4WD, MF 670 4WD, MF 690, MF 2620/2625, MF 2640/2645 2WD, MF 2640/2645 4WD, MF 2620/2625 4WD, MF 2680 2WD, MF 2680 4WD, MF 2720/2725, MF 3630 2WD, MF 3650 2WD, MF 3680 2WD, MF 3645 2WD, MF 3645 4WD, MF 3655 2WD, MF 3655 4WD, MF 3670 2WD, MF 3670 4WD, MF 3690 2WD, MF 3690 4WD, MF 3635 2WD, MF 3635 4WD, MF 1200, MF 1250, MF 8110 2WD, MF 8110 4WD, MF 8120 2WD, MF 8120 4WD, MF 8130 2WD, MF 8130 4WD, MF 8140 2WD, MF 8140 4WD, MF 8150 2WD, MF 8150 4WD, MF 8160 2WD, MF 8160 4WD, MF 4325 2WD, MF 4325 4WD, MF 4335 2WD, MF 4335 4WD, MF 4345 2WD, MF 4345 4WD, MF 4355 2WD, MF 4355 4WD, MF 4360 2WD, MF 4360 4WD, MF 4365 2WD, MF 4365 4WD, MF 4370 2WD, MF 4370 4WD, MF 4225 2WD, MF 4225 4WD, MF 4235 2WD, MF 4235 4WD, MF 4240 2WD, MF 4240 4WD, MF 4245 2WD, MF 4245 4WD, MF 4255 2WD, MF 4255 4WD, MF 4260 2WD, MF 4260 4WD, MF 4265 2WD, MF 4265 4WD, MF 4270 2WD, MF 4270 4WD, MF 9540, MF 9560, MF 9690, MF 9790, MF 9895, MF 9695, MF 9795, MF 3640, MF 5465 Dyna-4, MF 5450 T3, MF 2170XD, MF 2160 CE, MF 2170CE, MF 185 SII, MF 187CE, MF 265, MF 255, MF 260, MF 275 2WD, MF 298 2WD, MF 298 4WD, MF 298, MF 230, MF 270, MF 350 2WD, MF 350 4WD, MF 375 2WD, MF 375 4WD, MF 390 2WD, MF 390 4WD, MF 398 2WD, MF 398 4WD, MF 399 2WD, MF 399 4WD, MF 360 2WD, MF 360 4WD, MF 365 2WD, MF 365 4WD, MF 355 2WD, MF 355 4WD, MF 390T 2WD, MF 390T 4WD, MF 362 2WD, MF 362 4WD, MF 340 4WD, MF 340 2WD, MF 372 N 2WD, MF 372 N 4WD, MF 382 N 4WD, MF 362 N 2WD, MF 362 N 4WD, MF 342 2WD, MF 352 2WD, MF 7382 (04/15 - 03/17), MF 7274, MF 7380 (04/17 - 07/18), MF 7382 (04/17 - 07/18), MF 7280 (09/08 - 03/13), MF 7282 (09/08 - 03/13), MF 7278, MF 7272, MF 7380, MF 7380 AL, MF 7382, MF 9380 Fits Valtra Models Valtra Fitment Information Is Not Currently Available
€5,95
JMCE *SPECIAL PRICE* - AGCO | Thermostat - Acw019814B
Fits Fendt Models Fendt Fitment Information Is Not Currently Available Fits Massey Ferguson Models 6465 Dyna-6, 6475 Dyna-6, 6480 Dyna-6, MF 6497, MF 6499, MF 6465, MF 6475, MF 6480, MF 6490, MF 6495, MF 6485, MF 6445, MF 6455, MF 6460, MF 6470, MF 6497 XTRA, MF 6499 XTRA, 6485, MF 6490 T3, MF 6495 T3, MF 6470 T3, MF 6460 T3, 6465, MF 6475 T3, 6480, MF 6445 T3, MF 6455 T3, MF 6497 T3, MF 6499 T3, MF 7465 T3 SISU, MF 7475 T3 SISU, MF 7480 T3 SISU, MF 7465, MF 7475, MF 7480, MF 7485, MF 7490, MF 7495, MF 7485 T3, MF 7490 T3, MF 7495 T3, MF 7497, MF 7499, MF 8450, MF 8460, MF 8470, MF 8480, MF 8450 XTRA, MF 8460 XTRA, MF 8470 XTRA, MF 8480 XTRA, MF 3630, MF 3640, MF 3650, MF 3630 XTRA, MF 3640 XTRA, MF 3650 XTRA, MF 3615, MF 3625, MF 3635, MF 3645, MF 8650, MF 8660 , MF 8670, MF 8680, MF 8690, MF 5608 Dyna-4, MF 5609 Dyna-4, MF 5610 Dyna-4, MF 5611 Dyna-4, MF 5612 Dyna-4, MF 5612 Dyna-6, MF 5613 Dyna-4, MF 5613 Dyna-6, MF 7619 Dyna-VT, MF 7619 Dyna-6, MF 7620 Dyna-VT, MF 7620 Dyna-6, MF 7622 Dyna-VT, MF 7622 Dyna-6, MF 7624 Dyna-VT, MF 7624 Dyna-6, MF 7626 Dyna-6, MF 8737 S, MF 8727 S Dyna-VT, MF 8730 S Dyna-VT, MF 8732 S Dyna-VT, MF 8735 S Dyna-VT, MF 8737 S Dyna-VT, MF 8740 S Dyna-VT, MF 5465 Dyna-4, MF 5475 Dyna-4, MF 5445, MF 5455, 5460, 5465, MF 5425, MF 5435, MF 5470 T3, MF 5480 T3, MF 5465 T3, MF 5475 T3, MF 5460 SISU, MF 5445 T3, MF 5455 T3, MF 5410 T3, MF 5420 T3, MF 5430 T3, MF 5440 T3, MF 5450 T3, MF 8727, MF 8730, MF 8732, MF 8735, MF 8737 MR, MF 3707 V, MF 3708 V, MF 3709 V, MF 3707 S, MF 3708 S, MF 3709 S, MF 3710 S, MF 3707 F, MF 3708 F, MF 3709 F, MF 3710 F, MF 3707 WF, MF 3708 WF, MF 3709 WF, MF 3710 WF, MF 3707 GE, MF 3708 GE, MF 3709 GE, MF 3710 GE, MF 3707 AL, MF 3708 AL, MF 3709 AL, MF 3625 V 4WD, MF 3635 V 4WD, MF 3625 S 4WD, MF 3635 S 4WD, MF 3625 F 4WD, MF 3635 F 4WD, MF 3625 GE 4WD, MF 3635 GE 4WD Fits Valtra Models S232, S262, S292, S322, S352, No longer used Refer to 11652, No longer used Refer to 11647, No longer used Refer to 11648, No longer used Refer to 11649, No longer used Refer to 11650, No longer used Refer to 11651, S233, S263, S293, S323, S353, S294, S374, S324 SmartTouch MR19, S394 SmartTouch MR19
€66,95
JMCE *SPECIAL PRICE* - AGCO | Plug - 3902662M1
Fits Fendt Models Fendt Fitment Information Is Not Currently Available Fits Massey Ferguson Models MF 6110 2WD, MF 6120 2WD, MF 6130 2WD, MF 6140 2WD, MF 6150 2WD, MF 6150 4WD, MF 6160 2WD, MF 6160 4WD, MF 6170 2WD, MF 6170 4WD, MF 6180 2WD, MF 6180 4WD, MF 6190 2WD, MF 6190 4WD, MF 8170 4WD, MF 6290 2WD, MF 6290 4WD, MF 6280 2WD, MF 6280 4WD, MF 6270 2WD, MF 6270 4WD, MF 6265 2WD, MF 6265 4WD, MF 6260 2WD, MF 6260 4WD, MF 6255 2WD, MF 6255 4WD, MF 6245 2WD, MF 6235 2WD, MF 8260 4WD, MF 8250 2WD, MF 8250 4WD, MF 8280 4WD, MF 8270 4WD, MF 8260 2WD, MF 8240 2WD, MF 8240 4WD, MF 8220 2WD, MF 8220 4WD, MF 8210 2WD, MF 8210 4WD, 6465 Dyna-6, 6475 Dyna-6, 6480 Dyna-6, MF 6497, MF 6499, MF 6465, MF 6475, MF 6480, MF 6490, MF 6495, MF 6485, MF 6445, MF 6455, MF 6460, MF 6470, MF 6497 XTRA, MF 6499 XTRA, 6485, MF 6490 T3, MF 6495 T3, MF 6470 T3, MF 6460 T3, 6465, MF 6475 T3, 6480, MF 6445 T3, MF 6455 T3, MF 6497 T3, MF 6499 T3, MF 6612 Dyna-4, MF 6613 Dyna-6, MF 6613 Dyna-4, MF 6614 Dyna-6, MF 6615 Dyna-4, MF 6615 Dyna-6, MF 6616 Dyna-6, MF 7614 Dyna-4, MF 7615 Dyna-6, MF 7615 Dyna-4, MF 7616 Dyna-6, MF 7618 Dyna-6, MF 7619 Dyna-6, MF 7620 Dyna-6, MF 7622 Dyna-6, MF 7624 Dyna-6, MF 7626 Dyna-6, MF 6712 S Dyna-4, MF 6713 S Dyna-4, MF 6714 S Dyna-4 T4F, MF 6715 S Dyna-4 T4F, MF 6713 S Dyna-6, MF 6714 S Dyna-6, MF 6715 S Dyna-6 T4F, MF 6716 S Dyna-6 T4F, MF 6718 S Dyna-6, MF 6714 S Dyna-6 T4F, MF 7719 Dyna-6, MF 7715 DYNA-4, MF 7716 Dyna-6, MF 7714 Dyna-4, MF6713 S Dyna-6 T5, MF 6714 S Dyna-6 T5, MF 6715 S Dyna-6 T5, MF 6716 S Dyna-6 T5, MF 6718 S Dyna-6 T5, MF 7714 S Dyna-4, MF 7714 S Dyna-4 T5, MF 7715 S Dyna-6 T5, MF 7716 S Dyna-6 T5, MF 7718 S Dyna-6 T5, MF 5465 Dyna-4, MF 5475 Dyna-4, MF 5460 T3 SISU, MF 5445, MF 5455, 5460, 5465, MF 5470 T3, MF 5480 T3, MF 5465 T3, MF 5475 T3, MF 5445 T3, MF 5455 T3 Fits Valtra Models Valtra Fitment Information Is Not Currently Available
€41,95
JMCE *SPECIAL PRICE* - AGCO | Operator'S Manual - 4346732M2
Fits Fendt Models Fendt Fitment Information Is Not Currently Available Fits Massey Ferguson Models MF 5465 Dyna-4, MF 5475 Dyna-4, MF 5460 T3 SISU, MF 5425, MF 5435, 5460, MF 5470 T3, MF 5480 T3, MF 5445 T3, MF 5455 T3 Fits Valtra Models Valtra Fitment Information Is Not Currently Available
€41,95
Sparex Oil Seal 88.9 x 125 x 4mm | Sparex Part No.S.43504
Oil Seal 88.9 x 125 x 4mm | Sparex Part No. S.43504 The Seal - Rear Axle (Outer) is an essential component designed to ensure the optimal performance of your machinery. Manufactured by Sparex, this high-quality oil seal is engineered for durability and reliability, making it a perfect fit for various Massey Ferguson models. Product Specifications Brand: Sparex Tariff Code: 4016930090 Compatibility Information This oil seal is suitable for the following Massey Ferguson models: 3050 3060 3065 3075 3085 3095 5425 5435 5445 5455 5465 6235 6245 6255 6260 6265 6270 6280 6290 6445 6455 6460 6465 6470 6475 6480 Manufacturer Information Part Number: Massey Ferguson 3619137M1 Ensure your machinery operates smoothly with the reliable Sparex oil seal, designed specifically for your Massey Ferguson equipment.
€3,95
Sparex Oil Filter - Spin On - LF17475 | Sparex Part No.S.109385
Oil Filter - Spin On - LF17475 | Sparex Part No. S.109385 Ensure optimal performance for your machinery with the Fleetguard Oil Filter - LF17475. Designed for durability and efficiency, this spin-on oil filter is an essential component for maintaining the health of your engine. Product Specifications Brand: Fleetguard Dome Outside Diameter: 92 mm Filter Type: Oil Outer Diameter: 92 mm Overall Height: 210 mm Overall Length: 210 mm Reference: LF17475 Seam Outside Diameter: 93.5 mm Tariff Code: 8421310090 Thread Size: M24 x 1.50 INT Thread Type: INT Compatible Machinery This oil filter is suitable for the following Massey Ferguson models: 5465 5475 6465 6475 6480 7465 7475 7480 Manufacturer Information This product is compatible with various manufacturers, including: Claas - 0007988220, 7988220 Donaldson Filters - P550920 Fleetguard - LF17475 Hifi-Jurafil Filters - SO11092 Massey Ferguson - 4226293M1 Perkins - 2654A111 Upgrade your equipment's performance with the Fleetguard Oil Filter LF17475, designed for reliability and efficiency in demanding conditions.
€28,95
Sparex Mirror Head - Rectangular, , 320 x 230mm, Universal Fitting - S.39756
Mirror Head - Rectangular, 320 x 230mm, Universal Fitting - S.39756 Upgrade your machinery with the Mirror Head - Rectangular, designed for optimal visibility and safety. This mirror features a robust construction with a 22mm arm diameter and a lower clamp fixing, ensuring a secure fit for various applications. Product Specifications Alternative to: 10781 Arm Diameter: 22mm Brand: Britax E Approved: No Fitting: Universal Fitting Fixing: Lower Clamp Height: 12 1/2 inches (320mm) Width: 9 35/64 inches (230mm) Shape: Rectangular Replacement Glass: S.39764 Tariff Code: 7009100000 Related Products: 10782 Suitable For This mirror head is compatible with a wide range of machinery, including: Case IH / International Harvester: CX50, CX60, CX70, CX80, CX90, MAGNUM series, MX series, QUADTRAC, STEIGER series John Deere: 6100D, 6200, 6300, 6400, 6600, 6800, 6900, 7200, 7600, 7700, 7800 Massey Ferguson: 4215, 4220, 4225, 4235, 4245, 4255, 4260, 4265, 4270, 4315, 4325, 4335, 4345, 4355, 4360, 4365, 4370, 4707, 4708, 4709, 5410, 5420, 5425, 5430, 5435, 5440, 5445, 5450, 5455, 5460, 5465, 5470, 5475, 5480, 5608, 5609, 5610, 5611, 5612, 5613, 5710, 5711, 6110, 6120, 6130, 6140, 6150, 6160, 6170, 6180, 6190, 6235, 6245, 6255, 6260, 6265, 6270, 6280, 6290, 6445, 6455, 6460, 6465, 6470, 6475, 6480, 6485, 6490, 6495, 6497, 6499, 6612 DYNA series Manufacturer Information Compatible with OEM parts from: AGCO: 4288898M91 Britax: 7133.001, 7132.000.A Case IH / International Harvester: 235994A1, 87350494 Ford / New Holland: 297017A1, 87350494 John Deere: RE293966 Landini: 3806615M91, 3818552M1, 3787152M1 Massey Ferguson: 3787152M1, 3818552M1, 3806615M91
€134,95
You have seen 48 out of 575 products