MF 8250
AGCO Massey Ferguson - PTO Switch - 3619445M2
Fits *Part dependant on serial number. Contact us to check it will fit your tractor. Massey Ferguson 5400 Series 5425*, 5435*, 5445*, 5455*, 5460, 5460 SA, 5465, 5470, 5475, 5480 6200 Series 6235, 6245, 6255, 6260, 6265, 6270, 6280, 6290 8200 Series 8210, 8220, 8240, 8250, 8260*, 8270, 8280
$112.00 $101.00
Sparex LED Roof Work Light, Interference: Class 3, 9900 Lumens Raw, 10-30V () - S.152147
Sparex LED Roof Work Light - 9900 Lumens Raw, 10-30V This powerful Sparex LED roof work light is designed for use on a variety of agricultural machinery. It features a spot beam with a 80° beam angle and delivers 9900 lumens raw. The light is IP6K9K rated for water and dust resistance, and is also CE and RoHS approved. It is compatible with a wide range of tractors, including Case IH, Deutz-Fahr, Fendt, Massey Ferguson, and Steyr models. Key Features: 9900 Lumens Raw Spot Beam with 80° Beam Angle IP6K9K Rated for Water and Dust Resistance CE and RoHS Approved 10-30V Operating Voltage 2.75Amps Power Consumption @ 12V 1.38Amps Power Consumption @ 24V Alternative to: 119780, 147673 Related products: 119891, 151835, 151854, 163620, 163905 Suitable For: Case IH / International Harvester: CS110, CS120, CS130, CS150, CS48, CS52, CS58 Deutz-Fahr: AGROSTAR 4.61, AGROSTAR 4.68, AGROSTAR 4.71, AGROSTAR 4.78, AGROSTAR 6.08, AGROSTAR 6.11, AGROSTAR 6.21, AGROSTAR 6.28, AGROSTAR 6.31, AGROSTAR 6.38, AGROSTAR 6.61 Fendt: 712 VARIO, 712 VARIO (712), 714 VARIO, 716 VARIO, 718 VARIO, 720 VARIO SCR (735), 722 VARIO SCR (736), 818 VARIO, 820 VARIO, 822 VARIO, 824 VARIO, 826 VARIO, 916 VARIO, 918 VARIO, 920 VARIO, 922 VARIO, 926 VARIO, F 345 GT, F 395 GT, FARMER 200, FARMER 204 S, FARMER 240 S, FARMER 250 S, FARMER 250 SA, FARMER 250 V, FARMER 250 VA, FARMER 260 P, FARMER 260 PA, FARMER 260 S (296), FARMER 260 SA, FARMER 260 V, FARMER 260 VA, FARMER 270 P, FARMER 270 PA, FARMER 270 V, FARMER 270 VA, FARMER 275 S, FARMER 275 SA, FARMER 275 V, FARMER 275 VA, FARMER 280 P, FARMER 280 PA, FARMER 300, FARMER 303 LS, FARMER 303 LSA, FARMER 304 LS, FARMER 304 LSA, FARMER 304 S, FARMER 305 LS, FARMER 305 LSA, FARMER 306 LS, FARMER 306 LSA, FARMER 307 A, FARMER 307 C, FARMER 307 CA, FARMER 307 LS, FARMER 307 LSA, FARMER 307 LSE, FARMER 308 C, FARMER 308 CA, FARMER 308 LS, FARMER 308 LSA, FARMER 308 LSE, FARMER 309 CA, FARMER 310 LSA, FARMER 310 LSE, FARMER 311 LSA, FARMER 311 LSE, FARMER 312 LSA, FARMER 500, FAVORIT 509 C, FAVORIT 515 C, XYLON 520, XYLON 522, XYLON 524 Massey Ferguson: 5410, 5420, 5425, 5430, 5435, 5440, 5445, 5450, 5455, 5460, 5465, 5470, 5475, 5480, 6235, 6245, 6255, 6260, 6265, 6270, 6280, 6290, 6445, 6455, 6460, 6465, 6470, 6475, 6480, 6490, 6495, 6497, 6499, 7465, 7475, 7480, 7485, 7485 DYNA VT/DYNA STEP, 7490, 7495, 8240, 8250, 8260, 8270, 8280 Steyr: 8080, 9078, 9086, 9090, 9094, 942, 948, 955, 964, 970 Specifications: Alternative to: 119780, 147673 Beam Angle: 80° Beam Type: Spot Beam Brand: Sparex Cable length (mm): 450 CE Approved: Yes Connection Type: 2 pcs. DJ70215-6.3-11 Connector ECE Rating: Reg 10 Effective Lumens: 2700 / 1360 Fixing: 2 Bolts Function: 2, High / Low Beam Housing Material: Aluminium Interference EMC EMI CISPR 25: Class 3 IP Rating: IP6K9K Lens Colour: Clear Lens Material: Plastic Safety Glass Light source: LED Lumens Raw: 9900 Lux Value: 12115 Number of LEDs: 30 x LEDs Overall height (mm): 101.8 Overall length (mm): 182.5 Overall width (mm): 60.89 Power Consumption @ 12V: 2.75Amps Power Consumption @ 24V: 1.38Amps Related products: 119891, 151835, 151854, 163620, 163905 RoHS Approved: Yes SAE Approved: No Shape: Rectangular Tariff Code: 8539213000 Volts: 10-30V Watts: 90W With Noise Suppression: Yes Working Temperature °C: -40°C to 50°C This product is not associated with any particular OEM part number.
$148.00 $133.00
Sparex Wiper Motor 12V | Sparex Part No.S.35460
Wiper Motor 12V | Sparex Part No. S.35460 Product Specifications Brand: Sparex Degrees: 85° Related Products: 42766, 42767 Self Park: Yes Shaft Length: 57 mm Shaft Diameter: Tapered Spline, Shaft 10, Thread 8 mm Switch: No Tariff Code: 8501109190 Thread Length: 33 mm Thread Size: M16 Thread Type: Metric Voltage: 12V Compatible Wiper Arm: S.42766 Compatible Wiper Blade: S.42767 Suitable For This Wiper Motor is compatible with a wide range of Massey Ferguson models, including: 5425 5445 5455 5460 5465 6120 6130 6140 6150 6160 6170 6180 6190 6235 6245 6255 6260 6265 6270 6280 6290 6445 6455 6460 6465 6470 6475 6480 6485 6490 6495 6497 6499 7465 7475 7480 7485 7485 DYNA VT/DYNA STEP 7490 7495 8110 8120 8130 8140 8150 8160 8170 8180 8210 8220 8240 8250 8260 8270 8450 8460 8470 8480 Manufacture Information This product is manufactured by Massey Ferguson and is identified by OEM part numbers: 3715610M2, 3715610M1.
$489.00 $440.00
Sparex Viscous Fan Drive | Sparex Part No.S.104718
Viscous Fan Drive | Sparex Part No. S.104718 Product Specifications Brand: Sparex Number of Bolt Holes: 6 PCD: 77 mm Tariff Code: 8414900090 Diameter (Ø): 173 mm Compatibility Information This Viscous Fan Drive is designed to fit Massey Ferguson models: 8220, 8240, and 8250. Manufacturer Information OEM Part Number: Massey Ferguson 3783352M1 Supplier: Sparex Product Type: Fan Drive Product SKU: SP-104718 Additional Information: This Viscous Fan Drive ensures optimal performance and reliability for your Massey Ferguson machinery.
$572.00 $515.00
Sparex Thrust Washer | Sparex Part No.S.5595
Thrust Washer | Sparex Part No. S.5595 The Thrust Washer - Epicyclic is a high-quality component designed for optimal performance in various agricultural machinery. Manufactured by Sparex, this thrust washer ensures durability and reliability, making it an essential part for your equipment. Product Specifications Brand: Sparex Related Products: 107383, 40927, 42070, 43477, 43480, 73571 Tariff Code: 8708509990 Suitable For This thrust washer is compatible with a range of machinery, including: AGCO RT140A Challenger MT434, MT575B Landini 5830, 7830 Massey Ferguson models including 1004, 1004T, 1080, 1200, 1250, and many more. TAFE 8504 Manufacturer Information Compatible with Massey Ferguson OEM part numbers: 1866542M1, 894867M1. Ensure your machinery operates at peak efficiency with the Sparex Thrust Washer - Epicyclic. This essential component is designed to meet the rigorous demands of agricultural applications, providing a reliable solution for your equipment needs.
$4.00
Sparex Thrust Washer | Sparex Part No.S.41577
Thrust Washer | Sparex Part No. S.41577 Enhance the performance of your machinery with the high-quality Thrust Washer designed specifically for reduction units. This essential component ensures optimal functionality and durability, making it a reliable choice for your agricultural equipment. Product Specifications Brand: Sparex Related Products: 107338, 107340, 107341, 107346 Tariff Code: 7318220095 Compatibility Information This thrust washer is suitable for a variety of models, including: Landini: 7830, LARGE 9550 Massey Ferguson: 1004, 1004T, 1085, 1200, 1250, 148, 152, 158, 168, 185, 235, 245, 250, 255, 260, 261, 265 BRAZILIAN, 265 S (TR), 270, 275 BRAZILIAN, 282, 282 US BUILT, 283 BRAZILIAN, 285 (FR), 285 S (TR), 285 US BUILT, 290 BRAZILIAN, 290 US BUILT, 292 BRAZILIAN, 295 BRAZILIAN, 296 BRAZILIAN, 297 BRAZILIAN, 298 BRAZILIAN, 299 BRAZILIAN, 30, 30B, 30D, 30E, 342, 352, 362, 365, 375, 375E BRAZILIAN, 383, 390, 390E BRAZILIAN, 390T, 393, 396, 398, 399, 40, 40B, 410 UZEL, 420 UZEL, 4215, 4220, 4225, 4235, 4245, 425 BRAZILIAN, 4255, 4260, 4265, 4270, 430 UZEL, 4315, 4325, 4335, 4345, 435 BRAZILIAN, 4355, 4360, 4370, 440 BRAZILIAN, 445 BRAZILIAN, 460 BRAZILIAN, 465 BRAZILIAN, 475 BRAZILIAN, 481 BRAZILIAN, 492 BRAZILIAN, 50, 50A, 50B, 50C, 50D, 50E, 50F, 5340 BRAZILIAN, 5355 BRAZILIAN, 5360 BRAZILIAN, 5365 BRAZILIAN, 550, 565, 575, 590, 592, 595, 60, 6485, 6490, 6495, 6497, 670, 675, 690, 698, 698T, 699, 8170, 8180, 8210, 8220, 8240, 8250, 8260, 8270, 8280 TAFE: 8504 Manufacturer Information OEM Fitment Information: Massey Ferguson - 1866545M2 Upgrade your machinery with the Sparex Thrust Washer and ensure reliable performance in your agricultural operations.
$22.00 $20.00
Sparex Thrust Washers (Pair) | Sparex Part No.S.110986
Thrust Washers (Pair) | Sparex Part No. S.110986 Enhance the performance of your machinery with our high-quality Thrust Washers, specifically designed for a wide range of Sisu engines. This pair of washers is compatible with models including the Sisu 311C, CS, 311D, DS, 320D, DS, 320DE, DSRE, 411B, C, 411BS, CS, 411CX, 420D, DS, 420DR, DRS, 420DSI, 420DSRE, 420DW, 420DWRE, 420DWRIE, 611D, 612D, DS, 620D, 620DS, 620DSRE, 620DW, 620DWRE, 634D, 634DS, 634DSBE, and 634DSRE engines. Product Specifications Brand: Sparex Tariff Code: 7318220095 Compatibility Information These thrust washers are suitable for various agricultural machinery brands, including: Case IH / International Harvester: CS100, CS100 PRO, CS105 PRO, CS110, CS120, CS130, CS150, CS68, CS75, CS78, CS80, CS80 PRO, CS85 PRO, CS86, CS90, CS90 PRO, CS94, CS95 PRO, CVX1135, CVX1145, CVX1155, CVX1170, CVX1190, CVX1195, CVX120, CVX130, CVX140, CVX150, CVX160, CVX170, CVX175, CVX195 Challenger: 648, 648 COMBINE, MT315B, MT325B, MT335B, MT345B, MT555B, MT565B, MT575B, MT585B, MT595B, MT645B Fendt: 5270 C Ford / New Holland: T7510, T7520, T7530, T7540, T7550, TVT135, TVT145, TVT155, TVT170, TVT190, TVT195 Massey Ferguson: 3615, 3625, 3635, 3645, 3655, 4435, 4445, 4455, 5465, 5470, 5475, 5480, 6460, 6465, 6470, 6475, 6480, 6485, 6490, 6495, 6497, 6499, 7254, 7256, 7260, 7465, 7475, 7480, 7485, 7485 DYNA VT/DYNA STEP, 7490, 7495, 7497, 7499, 8240, 8250, 8450, 8460 Sisu Diesel: 311C, 311CS, 311D, 311DS, 320D, 320DE, 320DS, 320DSRE, 411B, 411BS, 411C, 411CS, 411CX, 420D, 420DR, 420DRS, 420DS, 420DSI, 420DSRE, 420DW, 420DWRE, 420DWRIE, 611D, 612D, 612DS, 620D, 620DS, 620DSRE, 620DW, 620DWRE, 634D, 634DS, 634DSBE, 634DSRE Steyr: 6145CVT, 6150CVT, 6155CVT, 6160CVT, 6170CVT, 6195CVT, 667, 680, 9080M, 9080MT, 9085MT, 9090M, 9090MT, 9095MT, 9100M, 9100MT, 9105, 9105MT, 9115, 9125, 9145, CVT 120, CVT 130, CVT 150, CVT 170, CVT 6135, CVT 6140, CVT 6145, CVT 6150, CVT 6155, CVT 6160, CVT 6170, CVT 6175, CVT 6190, CVT 6195, M9078, M9086, M9094, M968, M975 Valmet & Valtra: 1102, 1103, 1203, 255, 355, 365, 455, 465, 505, 515, 555, 565, 600, 6000, 602, 604, 605, 6100, 612, 615, 6250, 6250 HITECH, 6300, 6350, 6350 HITECH, 6400, 6550, 6550 HITECH, 6600, 665, 6650, 6650 HITECH, 6800, 6850, 6850 HITECH, 700, 702, 703, 800, 8000, 802, 803, 8050, 8050 HITECH, 8100, 8150, 8150 HITECH, 8200, 8300, 8350, 8350 HITECH, 8400, 8450, 8450 HITECH, 8550, 8550 HITECH, 8600, 865, 8750, 8800, 8950, 8950 HITECH, 900, 903, 905, 915 Manufacturer Information OEM fitment information includes: Case IH / International Harvester: 162000010714, 47108919 Ford / New Holland: 162000010714 Massey Ferguson: 3637636M1 Steyr: 162000010714, 47108919 Valmet & Valtra: 836119459, V83611945
$25.00 $23.00
AGCO AGCO | Threaded Pin - F718701030070
Fitment Information Fits Fendt Models1038 Vario S4, 1042 Vario S4, 1046 Vario S4, 1050 Vario S4, 207 Vario, 208 Vario, 209 Vario, 210 Vario, 211 Vario, 207 S Vario S3, 208 S Vario S3, 209 S Vario S3, 210 S Vario S3, 211 S Vario S3, 309 Vario, 310 Vario, 311 Vario, 312 Vario, 309 Vario SCR, 310 Vario SCR, 311 Vario SCR, 312 Vario SCR, 313 Vario SCR, 411 Vario, 412 Vario, 413 Vario, 414 Vario, 415 Vario, 714 Vario S4, 716 Vario S4, 718 Vario S4, 720 Vario S4, 722 Vario S4, 724 Vario S4, 712 Vario, 714 Vario, 716 Vario, 718 Vario, FAVORIT 711 VARIO, 716 Vario T2, 714 Vario SCR, 716 Vario SCR, 718 Vario SCR, 720 Vario SCR, 722 Vario SCR, 724 Vario SCR, 822 Vario S4, 824 Vario S4, 826 Vario S4, 828 Vario S4, 818 Vario, 820 Vario, 819 Vario SCR, 822 Vario SCR, 824 Vario SCR, 826 Vario SCR, 828 Vario SCR, 930 Vario Gen6, 933 Vario Gen6, 936 Vario Gen6, 939 Vario Gen6, 942 Vario Gen6Fits Massey Ferguson ModelsMF 6290 2WD, MF 6290 4WD, MF 6280 2WD, MF 6280 4WD, MF 6270 2WD, MF 6270 4WD, MF 6265 2WD, MF 6265 4WD, MF 6260 2WD, MF 6260 4WD, MF 6255 2WD, MF 6255 4WD, MF 6245 2WD, MF 6245 4WD, MF 6235 2WD, MF 6235 4WD, MF 8260 4WD, MF 8250 2WD, MF 8250 4WD, MF 8280 4WD, MF 8270 4WD, MF 8240 2WD, MF 8240 4WD, MF 8220 2WD, MF 8220 4WD, MF 8210 2WD, MF 8210 4WD, 6465 Dyna-6, 6475 Dyna-6, 6480 Dyna-6, MF 6497, MF 6499, MF 6465, MF 6475, MF 6480, MF 6490, MF 6495, MF 6485, MF 6445, MF 6455, MF 6460, MF 6470, MF 6497 XTRA, MF 6499 XTRA, 6485, MF 6490 T3, MF 6495 T3, MF 6470 T3, MF 6460 T3, 6465, MF 6475 T3, 6480, MF 6445 T3, MF 6455 T3, MF 6497 T3, MF 6499 T3, MF 7465 T3 SISU, MF 7475 T3 SISU, MF 7480 T3 SISU, MF 7465, MF 7475, MF 7480, MF 7485, MF 7490, MF 7495, MF 7485 T3, MF 7490 T3, MF 7495 T3, MF 7497, MF 7499, MF 8450, MF 8460, MF 8470, MF 8480, MF 8450 XTRA, MF 8460 XTRA, MF 8470 XTRA, MF 8480 XTRA, MF 8650, MF 8660 , MF 8670, MF 8680, MF 8690, MF 5709 S Dyna-4, MF 5709 S Dyna-6, MF 5608 Dyna-4, MF 5609 Dyna-4, MF 5610 Dyna-4, MF 5611 Dyna-4, MF 5611 Dyna-6, MF 5612 Dyna-4, MF 5612 Dyna-6, MF 5613 Dyna-4, MF 5613 Dyna-6, MF 6612 Dyna-4, MF 6613 Dyna-6, MF 6613 Dyna-4, MF 6614 Dyna-VT, MF 6614 Dyna-6, MF 6615 Dyna-4, MF 6615 Dyna-VT, MF 6615 Dyna-6, MF 6616 Dyna-VT, MF 6616 Dyna-6, MF 7614 Dyna-4, MF 7615 Dyna-VT, MF 7615 Dyna-6, MF 7615 Dyna-4, MF 7616 Dyna-VT, MF 7616 Dyna-6, MF 7618 Dyna-VT, MF 7618 Dyna-6, MF 7619 Dyna-VT, MF 7619 Dyna-6, MF 7620 Dyna-VT, MF 7620 Dyna-6, MF 7622 Dyna-VT, MF 7622 Dyna-6, MF 7624 Dyna-VT, MF 7624 Dyna-6, MF 7626 Dyna-6, MF 5709 SL Dyna-4, MF 5710 SL Dyna-4, MF 5710 SL Dyna-6, MF 5711 S Dyna-4, MF 5711 S Dyna-6, MF 5712 S Dyna-4, MF 5712 S Dyna-6, MF 5713 S Dyna-4, MF 5713 S Dyna-6, MF 6712 S Dyna-4, MF 6713 S Dyna-4, MF 6714 S Dyna-4 T4F, MF 6715 S Dyna-4 T4F, MF 6713 S Dyna-6, MF 6713 S Dyna-VT, MF 6714 S Dyna-6, MF 6714 S Dyna-VT, MF 6715 S Dyna-6 T4F, MF 6715 S Dyna-VT, MF 6716 S Dyna-6 T4F, MF 6716 S Dyna-VT T4F, MF 6718 S Dyna-6, MF 6718 S Dyna-VT, MF 6714 S Dyna-6 T4F, MF 6714 S DyFits Valtra ModelsS232, S262, S292, S322, S352, No longer used Refer to 11647, No longer used Refer to 11648, No longer used Refer to 11649, T195 (replaced by J3591), T210 (replaced by J3592), T230 (replaced by J3593), T250 (replaced by J3594), S233, S263, S293, S294, S324 SmartTouch MR19
$16.00 $15.00
Sparex Thermostatic Switch | Sparex Part No.S.106623
Thermostatic Switch | Sparex Part No. S.106623 Introducing the 46'' Capillary Tube, a high-quality component designed for optimal performance in various agricultural machinery. Manufactured by Sparex, this capillary tube is essential for ensuring accurate temperature regulation in your equipment. Product Specifications Brand: Sparex Capillary Length: 46'' Related Products: 106721, 111850 Tariff Code: 8708991055 Type: Variable Compatibility Information This capillary tube is suitable for a range of models, including: Landini: 6880, 7880, 8880, 9080, 9880, LARGE 10000, LARGE 12500, LARGE 13000, LARGE 14500, LARGE 16500, LARGE 16550, LARGE 9550, LEGEND 105, LEGEND 115, LEGEND 130 Massey Ferguson: 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 3115, 3120, 3125, 3140, 3610, 3630, 3635, 3645, 3650, 3655, 3660, 3670, 3680, 3690, 6110, 6120, 6130, 6140, 6150, 6160, 6170, 6180, 6190, 6235, 6245, 6255, 6260, 6265, 6270, 6280, 6290, 690, 698, 699, 8110, 8120, 8130, 8140, 8150, 8160, 8170, 8180, 8210, 8220, 8240, 8250, 8260, 8270, 8280 Manufacturer Information This product is compatible with various OEM parts, including: Fiat: 322106050, 9972057 Landini: 6005007689 Laverda: 322106050, 9972057 Massey Ferguson: 3902666M91, 3310669M92, 3310669M91 Renault: 6005007689 Upgrade your machinery with the reliable 46'' Capillary Tube from Sparex, ensuring efficient operation and longevity of your equipment.
$95.00 $86.00
AGCO AGCO | Pulling Spring - F281870062040
Fitment Information Fits Fendt ModelsFARMER 303 LS, FARMER 304 LS, FARMER 305 LS, FARMER 306 LS, FARMER 307 LS, FARMER 308 LS, FARMER 309 LS, FARMER 310 LS, FARMER 311 LS, FARMER 307 LSA, FARMER 308 LSA, FARMER 309 LSA, FARMER 310 LSA, FARMER 311 LSA, FARMER 312 LSA, FAVORIT 816, FAVORIT 818, FAVORIT 822, FAVORIT 824, XYLON 520, XYLON 522, XYLON 524, F345 GT, F360 GT, F365 GT, F370 GT, F380 GT, F390 GT, F395 GT, FARMER 102S, FARMER 103S, FARMER 104S, FARMER 105S, FARMER 106S, FARMER 108S, FARMER 260P, FARMER 270P, FARMER 280P, FARMER 240S, FARMER 250S, FARMER 260S, FARMER 275S/280S, FAVORIT 509 C, FAVORIT 510 C, FAVORIT 511 C, FAVORIT 512 C, FAVORIT 514 C, FAVORIT 515 C, FAVORIT 600 LS, FAVORIT 610 LS, FAVORIT 611 LS, FAVORIT 614 LSA, FAVORIT 615 LSA, FAVORIT 611 LSA, FAVORIT 612 LSA, Favorit 926 VarioFits Massey Ferguson ModelsMF 2620/2625, MF 2640/2645 2WD, MF 2640/2645 4WD, MF 2620/2625 4WD, MF 2680 2WD, MF 2680 4WD, MF 2720/2725, MF 3050 2WD, MF 3050 4WD, MF 3060 2WD, MF 3060 4WD, MF 3070 2WD, MF 3070 4WD, MF 3080 2WD, MF 3080 4WD, MF 3090 2WD, MF 3090 4WD, MF 3095 2WD, MF 3095 4WD, MF 3115 2WD, MF 3115 4WD, MF 3125 2WD, MF 3125 4WD, MF 3065 2WD, MF 3065 4WD, MF 3085 2WD, MF 3085 4WD, MF 3120 2WD, MF 3120 4WD, MF 3075 2WD, MF 3075 4WD, MF 3610 2WD, MF 3610 4WD, MF 3630 2WD, MF 3630 4WD, MF 3650 2WD, MF 3650 4WD, MF 3680 2WD, MF 3680 4WD, MF 3645 2WD, MF 3645 4WD, MF 3655 2WD, MF 3655 4WD, MF 3670 2WD, MF 3670 4WD, MF 3690 2WD, MF 3690 4WD, MF 3635 2WD, MF 3635 4WD, MF 6110 2WD, MF 6110 4WD, MF 6120 2WD, MF 6120 4WD, MF 6130 2WD, MF 6130 4WD, MF 6140 2WD, MF 6140 4WD, MF 6150 2WD, MF 6150 4WD, MF 6160 2WD, MF 6160 4WD, MF 6170 2WD, MF 6170 4WD, MF 6180 2WD, MF 6180 4WD, MF 6190 2WD, MF 6190 4WD, MF 8170 4WD, MF 8110 2WD, MF 8110 4WD, MF 8120 2WD, MF 8120 4WD, MF 8130 2WD, MF 8130 4WD, MF 8140 2WD, MF 8140 4WD, MF 8150 2WD, MF 8150 4WD, MF 8160 2WD, MF 8160 4WD, MF 6290 2WD, MF 6290 4WD, MF 6280 2WD, MF 6280 4WD, MF 6270 2WD, MF 6270 4WD, MF 6265 2WD, MF 6265 4WD, MF 6260 2WD, MF 6260 4WD, MF 6255 2WD, MF 6255 4WD, MF 6245 2WD, MF 6245 4WD, MF 6235 2WD, MF 6235 4WD, MF 8260 4WD, MF 8250 2WD, MF 8250 4WD, MF 8280 4WD, MF 8270 4WD, MF 8240 2WD, MF 8240 4WD, MF 8220 2WD, MF 8220 4WD, MF 8210 2WD, MF 8210 4WD, MF 375 2WD, MF 375 4WD, MF 390 2WD, MF 390 4WD, MF 398 2WD, MF 398 4WD, MF 399 2WD, MF 399 4WD, MF 365 2WD, MF 365 4WD, MF 390T 2WD, MF 390T 4WD, MF 372 N 2WD, MF 372 N 4WD, MF 382 N 4WD, MF 362 N 2WD, MF 362 N 4WDFits Valtra Models6000, 6600E, 6100, 8100LS, 6200, 6200E, 6200LS, 6300, 6300E, 6300LS, 6400, 6400E, 6400LS, 6600, 6800, 6800E, 8100E, 6900, 8200E, 8000, 8000LS, 8050, 8050E, 8100, 8150, 8150E, 8200, 8400, 8450, 8550, 8550E, 8750, 8400E, 8050LS, 8150LS, 8450E, 8750E
$14.00 $12.00
Sparex Thermostatic Switch | Sparex Part No.S.106621
Thermostatic Switch | Sparex Part No. S.106621 Enhance the performance of your machinery with the high-quality Thermostatic Switch from Sparex. Designed for precision and reliability, this variable thermostatic switch is an essential component for maintaining optimal temperature control in your equipment. Product Specifications Brand: Sparex Capillary Length: 62 inches Related Products: 106721 Tariff Code: 8708991055 Type: Variable Compatibility Information This thermostatic switch is compatible with a wide range of Massey Ferguson models, including: 4225 4235 4245 4255 4270 5455 5465 6110 6120 6130 6140 6150 6160 6170 6180 6190 6235 6245 6255 6270 6290 6465 6475 6480 6485 6490 6495 8110 8120 8130 8140 8150 8160 8170 8180 8210 8220 8240 8250 8260 8270 8280 Manufacturer Information This product is manufactured by Massey Ferguson and is identified by the following OEM part numbers: 3902701M92 3902701M91 390701M92 Upgrade your equipment with the reliable Thermostatic Switch from Sparex, ensuring efficient operation and longevity for your Massey Ferguson machinery.
$67.00 $61.00
Sparex Steering Joint, Length: 210mm - S.65866
Steering Joint - Length: 210mm - S.65866 Upgrade your machinery with our high-quality Steering Joint, designed for optimal performance and durability. This essential component features: Inner Thread Diameter (Ø A): M22 x 1.5 (RH) Length: 210mm Outer Thread Diameter (Ø B): M24 x 1.5 (RH) Product Specifications Alternative to: 137446, 137447 Brand: Sparex Tariff Code: 8708949900 Related Products: 21185, 21187, 21188, 34024, 41714, 65867, 70600, 70601, 70602, 70603, 7769, 7798, 7799, 7800, 7803, 7809, 7810, 7811, 7812, 7813, 7814, 119940, 137443, 137449 Compatibility Information This Steering Joint is suitable for a wide range of machinery, including: Case IH / International Harvester: 1896, 2096, 5120, 5130, 5140, 5150, 5220, 5230, 5240, 5250, 580, 590, 590T, 680, 680L, 780, 780D, MX100, MX100C, MX110, MX120, MX135, MX150, MX170, MX90C Claas: ARES 547, ARES 557, ARES 567, ARES 577, ARES 617, ARES 657, ARES 697 Deutz-Fahr: AGROTRON 100 MK2, AGROTRON 100 MK3, AGROTRON 105 MK2, AGROTRON 106 MK2, AGROTRON 106 MK3, AGROTRON 108 MK2, AGROTRON 110 MK2, AGROTRON 110 MK3, AGROTRON 1130 TTV, AGROTRON 1145 TTV, AGROTRON 115 MK2, AGROTRON 115 MK3, AGROTRON 1160 TTV, AGROTRON 118 MK2, AGROTRON 120 MK2, AGROTRON 128 MK2, AGROTRON 130 MK2, AGROTRON 135 MK2, AGROTRON 140 MK2, AGROTRON 150 MK2, AGROTRON 150.7, AGROTRON 155 MK2, AGROTRON 165 MK2, AGROTRON 165.7, AGROTRON 4.70 MK1, AGROTRON 4.80 MK1, AGROTRON 4.85 MK1, AGROTRON 4.90 MK1, AGROTRON 4.95 MK1, AGROTRON 6.00 MK1, AGROTRON 6.01 MK1, AGROTRON 6.05 MK1, AGROTRON 6.15 MK1, AGROTRON 6.20 MK1, AGROTRON 6.30 MK1, AGROTRON 6.45 MK1, AGROTRON 80 MK2, AGROTRON 80 MK3, AGROTRON 85 MK2, AGROTRON 90 MK2, AGROTRON K 100, AGROTRON K 90, AGROXTRA 6.07, AGROXTRA 6.17 Fendt: FAVORIT 611, FAVORIT 612, FAVORIT 614, FAVORIT 615 Ford / New Holland: 5640, 6640, 7630, 7740, 7840, 7910, 8030, 8210, 8240, 8340, LM500, TW15, TW25, TW5 John Deere: 2140, 2750, 2950, 3040, 3050, 3140, 3350, 4400, 4500, 6010, 6020, 6020SE, 6110, 6120, 6120SE, 6130, 6220, 6220SE, 6230, 6230 PREMIUM, 6300, 6310, 6330, 6330 PREMIUM, 6400, 6410, 6430, 6430 PREMIUM, 6506, 6510, 6600, 6610, 6800, 6810 Landini: 10000, 12500, 14500, 16500, 17500, 19000, 7-145, 7-165, LARGE 12500, LARGE 14500, LARGE 16500, LARGE 17500, LARGE 19000 Manitou: VARIOUS Massey Ferguson: 3050, 3060, 3065, 3095, 3120, 3125, 3140, 3610, 3630, 3635, 3645, 365, 3650, 3655, 3660, 3670, 3680, 3690, 375, 390, 390T, 396, 4225, 4235, 4245, 4255, 4260, 4265, 4270, 440 BRAZILIAN, 5460, 5470, 5480, 6110, 6120, 6130, 6140, 6170, 6180, 6190, 6270, 6280, 6290, 6460, 6465, 6470, 6475, 6480, 6485, 6490, 6495, 6497, 6499, 7465, 7475, 7485, 7485 DYNA VT/DYNA STEP, 7490, 7495, 8110, 8120, 8130, 8140, 8150, 8160, 8210, 8220, 8240, 8250, 8260, 8925, 8926, 8937, 8939, 8947 Matbro: TS230 HI-TORQUE, TS260, TS270, TS270 HI-TORQUE, TS280, TS290 HI-TORQUE McCormick: MC100, MC105, MC115, MC90, MC95, MTX110, MTX120, MTX125, MTX135, MTX140, MTX145, MTX150, MTX155, MTX165, MTX175, MTX185, MTX200, XTX145, XTX165 Renault: 103-54, 106-54, ARES 540, ARES 546, ARES 550, ARES 556, ARES 566, ARES 610, ARES 616, ARES 620, ARES 626, ARES 630, ARES 636, ARES 640, ARES 656, ARES 696, ARES 710, ARES 715, ARES 720, ARES 725, ARES 735, ARES 815, ARES 816, ARES 825, ARES 826, ARES 835, ARES 836, ATLES 915, CELTIS 456, ERGOS 456, TEMIS 550, TEMIS 610, TEMIS 630, TEMIS 650 Sanderson: TL6, TL7 Valmet & Valtra: 6250, 6350, 6550, 6650, 6650 HITECH, 6850, 6850 HITECH, 8050, 8050 HITECH, 8150, 8150 HITECH, 8300, 8350, 8350 HITECH, 8450, 8450 HITECH, 8550, 8550 HITECH, 8600, 8950, 8950 HITECH, T120, T130, T140, T150, T160, T170, T180, T190 Manufacturer Information This Steering Joint is manufactured by Sparex and is compatible with various OEM part numbers: Carraro: CAR49013 Case IH / International Harvester: 9968018, N14377, ZP0750125010, 48038758, 9968015, 041063R1 Claas: 0003240530, 3240530 Deutz-Fahr: 090004516, 04415654 Ford / New Holland: 83957792, 83957096, 1429647, 83962754, 9968015, 9968018, 48038758, CAR49013, ZP0501205010, ZP0501205167, ZP0750125010 John Deere: AL168711, AL60161, AL80542, EQ501479 Landini: 3426255M1, 311446A1, 247522A1, N14377 Manitou: 601209 Massey Ferguson: 3903684V1, 3426255R1, 346255M1, 3426255M1, 3903684M1, 3903690M1, 3909318M1, 4232169M1, 83957792, CAR49013, 7502445012, 1442486X1 Matbro: 503467, 501479 McCormick: N14377, 247522A1, 3665323M1 Renault: 6000103325 Sanderson: ABP3004401 Valmet & Valtra: 34051500, V34051500, F34262551
$63.00 $57.00
Sparex Starter Motor - 12V, 4.2Kw, Gear Reducted (Mahle) | Sparex Part No.S.127861
Starter Motor - 12V, 4.2Kw, Gear Reduced (Mahle) | Sparex Part No. S.127861 Product Specifications A (mm): 127 a Angle (°): 45 Alternative to: 150754 B (mm): 89 Bell Opening: LH Brand: Mahle C (mm): 32.5 D (mm): 39.6 Distance Between Teeth (mm): 15.4 E (mm): 10.9 Fitting: 3 Hole Flange - LH Opening Gear Reduced: Yes Height (mm): 149.2 Kilowatts: 4.2 Length (mm): 387.4 Length from Front Mounting Face to Rear (mm): 240 Mounting Hole (mm): 10.9 Number of Flange Holes: 3 Number of Teeth: 10 Outer Diameter of Battery Terminal (mm): 9.8 Tariff Code: 8511400090 Volts: 12V Suitable For Information This starter motor is compatible with a variety of machinery, including: Case IH / International Harvester: C50, C60, C70, C90, CX50, CX60, CX80, CX90, MX100C, MX80C, MX90C JCB: 3CX 4 Landini: 6000, 7000, C6000, LEGEND 105, LEGEND 115, LEGEND 130, LEGEND 145, LEGEND 165, MYTHOS 110 Massey Ferguson: 1200, 3085, 3095, 3115, 3120, 3125, 3140, 3635, 3640, 3645, 3655, 3660, 3680, 5365 BRAZILIAN, 5410, 5420, 5425, 5430, 5435, 5440, 5445, 5450, 5455, 5460, 5465, 5470, 5475, 5480, 5650, 6160, 6170, 6180, 6190, 6260, 6270, 6280, 6290, 6445, 6455, 6460, 6465, 6470, 6475, 6480, 6485, 6490, 6495, 6497, 6499, 660, 6612 DYNA 4, 6613 DYNA 4, 6613 DYNA 6, 6614 DYNA 6, 6614 DYNA VT, 6615 DYNA 4, 6615 DYNA 6, 6615 DYNA VT, 6616 DYNA 6, 6616 DYNA VT, 680 BRAZILIAN, 7465, 7475, 7480, 7485, 7485 DYNA VT/DYNA STEP, 7490, 7495, 7497, 7499, 7614 DYNA 4, 7615 DYNA 4, 7615 DYNA 6, 7615 DYNA VT/DYNA STEP, 7616 DYNA 6, 7616 DYNA VT/DYNA STEP, 7618 DYNA 6, 7618 DYNA VT/DYNA STEP, 7619 DYNA 6, 7619 DYNA VT, 7620 DYNA 6, 7620 DYNA VT, 7622 DYNA 6, 7622 DYNA VT, 7624 DYNA 6, 7624 DYNA VT, 7626 DYNA 6, 8110, 8120, 8130, 8140, 8150, 8160, 8170, 8180, 8210, 8220, 8240, 8250, 8260, 8270, 8280, 8450, 8460, 8470, 8480, 8925, 8926 McCormick: CX50, CX60, MC130 Perkins: A4.236 Manufacturer Information This starter motor is manufactured by: Bosch: 986018151, Case IH / International Harvester 388187A1, 73326810, 6106496M92 HELLA LTD: 8EA730209-001, 8EA730219-001, CS693, CS703 Iskra: IS1160 JCB: 714/29300R Landini: 3648190M91, 3551773M91 Lester: 17649 Lucas: LRS00195, LRS00124, 27588, 27570, NSB529, NSB524, LRS00161, LRS00968, 27518, 27520 Magnetimar: 943227518, 63227596, 63227478, 63227520, 63227518, 943252076, 943226294, 943226366, 943227502, 943227520, 63296357, 54293284, 63227486, 943227570, 943227572, 943227524, 943252075, MSN191, MSN180, 943226357, 943226329, 943226348, 63227585, 63227588 Massey Ferguson: 3648190M91, 3667040M91, 3777247M1, 3823621M95, 3823621M96, 3823621M93, 3823621M91, 3823621M94 McCormick: 6106496M92, 388187A1 Perkins: 2873001, 3581576R1, 2873B056, 2873B071, 3581576M1, 1446802M91, 1447732M1, 1447732R1, 2873A102, 2873A030
$516.00 $464.00
Sparex Starter Motor - 12V, 4.2Kw, Gear Reducted (Mahle) | Sparex Part No.S.137297
Starter Motor - 12V, 4.2Kw, Gear Reduced (Mahle) Product Specifications A (mm): 127 a Angle (°): 45 B (mm): 89 Bell Opening: LH Brand: Mahle C (mm): 32.5 D (mm): 39.6 Distance Between Teeth (mm): 15.4 E (mm): 10.9 Fitting: 3 Hole Flange - LH Opening Gear Reduced: Yes Height (mm): 152.4 Kilowatts: 4.2 Length (mm): 381 Length from Front Mounting Face to Rear (mm): 240 Mounting Hole (mm): 10.9 Number of Flange Holes: 3 Number of Teeth: 10 Outer Diameter of Battery Terminal (mm): 9.8 Related Products: 38018 Tariff Code: 8511400090 Volts: 12V Suitable For Information This starter motor is compatible with a wide range of Massey Ferguson models, including: 5460, 5460SA, 5465, 5470, 5475, 5480 6460, 6465, 6470, 6475, 6480, 6485 6490, 6495, 6497, 6499 6612 DYNA 4, 6613 DYNA 4, 6613 DYNA 6 6614 DYNA 6, 6614 DYNA VT, 6615 DYNA 4 6615 DYNA 6, 6615 DYNA VT, 6616 DYNA 6 6616 DYNA VT, 7465, 7475, 7480, 7485 7485 DYNA VT/DYNA STEP, 7490, 7495 7614 DYNA 4, 7615 DYNA 4, 7615 DYNA 6 7615 DYNA VT/DYNA STEP, 7616 DYNA 6 7616 DYNA VT/DYNA STEP, 7618 DYNA 6 7618 DYNA VT/DYNA STEP, 7619 DYNA 6 7619 DYNA VT, 7620 DYNA 6, 7620 DYNA VT 7622 DYNA 6, 7622 DYNA VT, 7624 DYNA 6 7624 DYNA VT, 7626 DYNA 6, 8240, 8250 8260, 8270, 8280 Also suitable for Valmet & Valtra models S293 and S353. Manufacturer Information Manufactured by Iskra, this starter motor is identified by the OEM part numbers: Massey Ferguson: 3786094M94, 3823621M91, 382361M94, 3823621M93, 3786094M93, 3784889M2, 3823621M95, 3823621M96, 3784890M1, 1072559, 1029405, 836667507 Valmet & Valtra: V836667507 Product Supplier: Sparex Product Type: Starter Motor Product SKU: SP-137297
$669.00 $602.00
Sparex Stabiliser - S.150419
Sparex Stabilizer - S.150419 This Sparex Stabilizer is a high-quality replacement part designed for a variety of Massey Ferguson tractors. It features a robust construction and precise dimensions to ensure a perfect fit and reliable performance. Key Features: Minimum Length: 440mm (17 21/64 inches) Maximum Length: 585mm (23 1/32 inches) Ball Size: 25.4mm (1 inch) Ball Width: 51mm (2 inches) Thread Size: M30x3.5 (Metric) Pin Diameter: 24mm (15/16 inch) Tube Length: 318mm Suitable For: This stabilizer is compatible with a wide range of Massey Ferguson tractors, including: 3050, 3055, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095 3115, 3120, 3125, 3140, 3610, 3630, 3635, 3645, 3650, 3655 3670, 3680, 3690, 5425, 5430, 5435, 5440, 5445, 5450, 5455 5460, 5465, 5470, 5475, 5480, 6110, 6120, 6130, 6140, 6150 6160, 6170, 6180, 6190, 6235, 6245, 6255, 6260, 6265, 6270 6280, 6290, 6445, 6455, 6460, 6465, 6470, 6475, 6480, 6485 6490, 6495, 6497, 6499, 6S.135 DYNA 6, 6S.145 DYNA 6, 6S.155 DYNA 6 6S.165 DYNA 6, 6S.180 DYNA 6, 7S.155 DYNA 6, 7S.165 DYNA 6, 7S.180 DYNA 6 8110, 8120, 8130, 8140, 8150, 8160, 8170, 8180, 8210, 8220 8240, 8250, 8260, 8270, 8280 Manufacturer Information: This Sparex stabilizer is a direct replacement for the following Massey Ferguson OEM parts: 3615707M91 3615707M92 7700061824 3615707M93 71818748 3794474M91 3794419M91 3716775M1 3716608M1 Order your Sparex Stabilizer today and ensure your Massey Ferguson tractor is running smoothly!
$258.00 $232.00
Sparex Starter Motor - 12V, 2.8Kw (Sparex) | Sparex Part No.S.361051
Starter Motor - 12V, 2.8Kw (Sparex) | Sparex Part No. S.361051 Product Specifications A (mm): 127 Alternative to: 361050 B (mm): 89 Bell Opening: LH Brand: Sparex C (mm): 32.5 D (mm): 39.6 Distance Between Teeth (mm): 15.4 Earth Stud: Yes Fitting: 3 Hole Flange - LH Opening Gear Reduced: No Height (mm): 180 Kilowatts: 2.8 Length (mm): 392 Length from Front Mounting Face to Rear (mm): 250 Mounting Hole (mm): 11 Number of Flange Holes: 3 Number of Teeth: 10 Tariff Code: 8511400090 Volts: 12V Suitable For This starter motor is compatible with various models, including: Landini: 6000, 7000, C6000 Massey Ferguson: 3085, 3095, 3115, 3120, 3125, 3635, 3645, 3655, 3670, 3680, 3690, 6160, 6170, 6180, 6190, 6260, 6270, 6280, 6290, 8110, 8120, 8130, 8140, 8150, 8160, 8210, 8220, 8240, 8250, 8260 Perkins: A6.354.4, AT6.354.4, T6.354.4 Valmet & Valtra: 8300, 8600 Manufacturer Information This starter motor is manufactured by: Iskra: IS0526, Landini 3551773M91, 3581576M3, 3581576M2, 3541730M91, 3541729M91, 2873B056, 2873A102, 2873B071, 2873001, 1447732M1 Lucas: LRS195, NSB529, LRS968, 27518, 27520, 27570 Massey Ferguson: 3581576M2, 2873B071, 2873B056T, 28730001T, 3581576M3, 3935081E1ATG, 3930508R1, 3930508E1 Perkins: 2873001, 2873B056, 2873B071, 2873A102
$489.00 $440.00
Sparex Stabiliser - S.150416
Sparex Stabiliser - S.150416 This Sparex Stabiliser is a high-quality replacement part for a variety of Massey Ferguson tractors. It features a durable construction and is designed to provide reliable performance. Key Features: Minimum Length: 450mm (17 23/32 inches) Maximum Length: 650mm (25 19/32 inches) Ball Size: 25.4mm (1 inch) Ball Width: 51mm (2 inches) Pin Diameter: 24mm (15/16 inch) Thread Size: M27x3 Thread Type: Metric Tube Length: 330mm Suitable For: This stabiliser is compatible with the following Massey Ferguson tractor models: 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3095 3115, 3120, 3125, 3140, 3635, 3655, 3670, 3680, 3690 5425, 5435, 5445, 5455, 5460, 5465, 6110, 6120, 6130 6140, 6150, 6160, 6170, 6180, 6190, 6235, 6245, 6255 6260, 6265, 6270, 6280, 6290, 6445, 6455, 6460, 6465 6475, 6480, 6485, 6490, 6495, 6497, 6499, 6S.135 DYNA 6 6S.145 DYNA 6, 6S.155 DYNA 6, 6S.165 DYNA 6, 6S.180 DYNA 6 7S.155 DYNA 6, 7S.165 DYNA 6, 7S.180 DYNA 6, 8110, 8120, 8130 8140, 8150, 8160, 8210, 8220, 8240, 8250 Manufacturer Information: This Sparex Stabiliser is a high-quality replacement part for Massey Ferguson tractors. It is manufactured to meet or exceed OEM specifications. OEM Part Numbers: 3615707M91, 3615707M92, 3615707M93, 7700061824, 3794419M91, 3794474M91, 71818748 Order your Sparex Stabiliser today and keep your Massey Ferguson tractor running smoothly!
$194.00 $174.00
Sparex Starter Motor - 12V, 3.2Kw, Gear Reducted (Mahle) | Sparex Part No.S.127860
Starter Motor - 12V, 3.2Kw, Gear Reduced (Mahle) Product Specifications A (mm): 127 a Angle (°): 50 B (mm): 89 Bell Opening: LH Brand: Mahle C (mm): 32.5 D (mm): 39.6 Distance Between Teeth (mm): 14.4 E (mm): 10.9 Fitting: 3 Hole Flange - LH Opening Gear Reduced: Yes Height (mm): 146.1 Kilowatts: 3.2 Length (mm): 387.4 Length from Front Mounting Face to Rear (mm): 225 Mounting Hole (mm): 10.9 Number of Flange Holes: 3 Number of Teeth: 10 Outer Diameter of Battery Terminal (mm): 7.8 Tariff Code: 8511400090 Volts: 12V Suitable For This starter motor is compatible with a range of Massey Ferguson models including: 5465 5470 5470 SA 5475 SA 6260 6270 6280 6290 6465 6475 6480 6485 6490 6495 6497 6499 7465 7475 7480 7485 7485 DYNA VT/DYNA STEP 7490 7495 8210 8220 8240 8250 8925 8926 Manufacturer Information This starter motor is also suitable for various OEM applications, including: Caterpillar: 3127539, 3575202, 2253148 Claas: 0011445780, 11445780 Iskra: IS1195 Lester: 18941 Lucas: LRS02206 Magnetimar: MSN8040, 63280040 Massey Ferguson: 3823621M91, 3784890M1, 3784889M2 Perkins: 2873K404, 2873K621, 2873K632, 3575202, 3586847
$708.00 $638.00
Sparex Starter Motor - 12V, 2.8Kw (Mahle) | Sparex Part No.S.361050
Starter Motor - 12V, 2.8Kw (Mahle) | Sparex Part No. S.361050 Product Specifications A (mm): 127 a Angle (°): 45 Alternative to: 361051, 127864 B (mm): 89 Bell Opening: LH Brand: Mahle C (mm): 32.5 D (mm): 39.6 Distance Between Teeth (mm): 15.4 E (mm): 10.9 Fitting: 3 Hole Flange - LH Opening Gear Reduced: No Height (mm): 146.1 Kilowatts: 2.8 Length (mm): 381 Length from Front Mounting Face to Rear (mm): 250 Mounting Hole (mm): 10.9 Number of Flange Holes: 3 Number of Teeth: 10 Outer Diameter of Battery Terminal (mm): 7.8 Related Products: 39956 Tariff Code: 8511400090 Volts: 12V Suitable For Landini: 6000, 7000, C6000 Manitou: MLA628, MLT626, MLT628, MLT725, MRT2150, MT732, MT932 Massey Ferguson: 3085, 3095, 3115, 3120, 3125, 3635, 3645, 3655, 3670, 3680, 3690, 6160, 6170, 6180, 6190, 6260, 6270, 6280, 6290, 8110, 8120, 8130, 8140, 8150, 8160, 8210, 8220, 8240, 8250, 8260 Perkins: A6.354.4, AT6.354.4, T6.354.4 Valmet & Valtra: 8300, 8600 Manufacturer Information AGCO: C000900060090 Bosch: 986018151 Case IH / International Harvester: 73328002 Claas: 6005706629 Iskra: IS0526 JCB: 714/29300R Landini: 3551773M91, 1447732M1, 2873A102, 2873B056, 2873B071, 2873001, 3581576M2, 3581576M3, 3541729M91, 3541730M91, 3648190M91 Lester: 17650, 17649, 17644 Lucas: 27570, LRS00161, LRS00968, LRS968, NSB524, 27518, 27520, 27588, NSB529, LRS00195, LRS00124, LRS195, LRS00302 Manitou: 745011 Massey Ferguson: 3581576M1, 3581576M2, 3935081E1ATG, 3930508E1, 3581576M3, 28730001T, 2873B056T, 2873B071, 2873001T, 3930508R1 Perkins: 1447732MI, 3581576MI, 3581576R1, 2873B056, 2873B071, 37701400, 2873001, 2873A001, 2873A102, 2873A030, 1446802M91, 1447732R1
$545.00 $490.00
Sparex Starter Motor - 12V, 3Kw, Gear Reducted (Mahle) | Sparex Part No.S.36200
Starter Motor - 12V, 3Kw, Gear Reduced (Mahle) | Sparex Part No. S.36200 Product Specifications A (mm): 127 a Angle (°): 45 B (mm): 89 Bell Opening: LH Brand: Mahle C (mm): 32.5 D (mm): 39.6 Distance Between Teeth (mm): 15.4 E (mm): 10.9 Fitting: 3 Hole Flange - LH Opening Gear Reduced: Yes Height (mm): 152.4 Kilowatts: 3 Length (mm): 390.5 Length from Front Mounting Face to Rear (mm): 240 Mounting Hole (mm): 10.9 Number of Flange Holes: 3 Number of Teeth: 10 Outer Diameter of Battery Terminal (mm): 9.8 Related Products: 38018 Tariff Code: 8511400090 Volts: 12V Suitable For This starter motor is compatible with various models, including: Landini: LEGEND 125, LEGEND 130, LEGEND 135, LEGEND 145, LEGEND 160, LEGEND 165, LEGEND 185 Massey Ferguson: 5465, 6260, 6270, 6280, 6290, 6465, 7475, 7480, 8210, 8220, 8240, 8250, 8260 McCormick: G115 MAX, G130 MAX, G160 MAX Manufacturer Information This product is manufactured by leading brands, including: AGCO: 1029405, 3823621M92, 3823621M95, 3786094M93, 1072559, 3784890M1, 3786094M94 Argo: 3667040M91, 3680133M91 Iskra: IS1071 Landini: 3667040M91, 3823621M94, 3680133M91, 3784889M2, 2873K404, 2873K621 Lester: 18941 Massey Ferguson: 4226826M91, 3823621M93, 3823621M94, 3823621M91, 3784890M1, 3784889M2, 4225352M91, 2873K404 McCormick: 3667040M91, 3784889M2
$654.00 $589.00
Sparex Square Wheel Bolt M18 x 1.5 x 95mm | Sparex Part No.S.43523
Square Wheel Bolt M18 x 1.5 x 95mm | Sparex Part No. S.43523 Introducing the Square Wheel Bolt M18 x 1.5 x 95mm, a high-quality component designed for durability and reliability in agricultural machinery. Manufactured by Sparex, this wheel bolt is an essential part for ensuring the secure attachment of wheels on various models. Product Specifications Size (mm): M18 x 1.5 Alternative Part Number: 11507 Diameter (B): 18 Brand: Sparex Thread Length (C): 54 Overall Length (D): 95 Finish: BZP Clear Passivation Grade: 8.8 Grip Diameter: 18 Metric or Imperial: Metric Related Products: 11507, 54881, 6840 Tariff Code: 7318159589 Thread Type: Metric Type: Square Compatibility Information This wheel bolt is suitable for a wide range of Massey Ferguson models, including: 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095 3115, 3120, 3125, 3610, 3630, 3635, 3645, 3650, 3655 3670, 3680, 3690, 6150, 6160, 6170, 6180, 6190 6235, 6245, 6255, 6260, 6265, 6270, 6280, 6290 6465, 6485, 6490, 6495, 6497, 6499, 7465, 7475 7480, 7485, 7490, 7495, 8110, 8120, 8130, 8140 8150, 8160, 8170, 8180, 8210, 8220, 8240, 8250 8260, 8270, 8280, 8450, 8460, 8470, 8480 Manufacturer Information This product is compatible with the following OEM part numbers: Landini: 3384603M1 Massey Ferguson: 3384603M1, 920700180070 Upgrade your machinery with the Square Wheel Bolt M18 x 1.5 x 95mm from Sparex, ensuring optimal performance and safety on the field.
$13.00 $12.00
AGCO AGCO | Spring - F718701030040
Fitment Information Fits Fendt Models309 Vario SCR, 310 Vario SCR, 311 Vario SCR, 312 Vario SCR, 313 Vario SCR, 411 Vario, 412 Vario, 413 Vario, 414 Vario, 415 Vario, 714 Vario S4, 716 Vario S4, 718 Vario S4, 720 Vario S4, 722 Vario S4, 724 Vario S4, 712 Vario, 714 Vario, 716 Vario, 718 Vario, FAVORIT 711 VARIO, 716 Vario T2, 714 Vario SCR, 716 Vario SCR, 718 Vario SCR, 720 Vario SCR, 722 Vario SCR, 724 Vario SCR, 822 Vario S4, 824 Vario S4, 826 Vario S4, 828 Vario S4, 818 Vario, 820 Vario, 819 Vario SCR, 822 Vario SCR, 824 Vario SCR, 826 Vario SCR, 828 Vario SCRFits Massey Ferguson ModelsMF 6290 2WD, MF 6290 4WD, MF 6280 2WD, MF 6280 4WD, MF 6270 2WD, MF 6270 4WD, MF 6265 2WD, MF 6265 4WD, MF 6260 2WD, MF 6260 4WD, MF 6255 2WD, MF 6255 4WD, MF 6245 2WD, MF 6245 4WD, MF 6235 2WD, MF 6235 4WD, MF 8260 4WD, MF 8250 2WD, MF 8250 4WD, MF 8280 4WD, MF 8270 4WD, MF 8260 2WD, MF 8240 2WD, MF 8240 4WD, MF 8220 2WD, MF 8220 4WD, MF 8210 2WD, MF 8210 4WD, 6465 Dyna-6, 6475 Dyna-6, 6480 Dyna-6, MF 6497, MF 6499, MF 6465, MF 6475, MF 6480, MF 6490, MF 6495, MF 6485, MF 6445, MF 6455, MF 6460, MF 6470, MF 6497 XTRA, MF 6499 XTRA, 6485, MF 6490 T3, MF 6495 T3, MF 6470 T3, MF 6460 T3, 6465, MF 6475 T3, 6480, MF 6445 T3, MF 6455 T3, MF 6497 T3, MF 6499 T3, MF 7465 T3 SISU, MF 7475 T3 SISU, MF 7480 T3 SISU, MF 7465, MF 7475, MF 7480, MF 7485, MF 7490, MF 7495, MF 7485 T3, MF 7490 T3, MF 7495 T3, MF 7497, MF 7499, MF 8450, MF 8460, MF 8470, MF 8480, MF 8450 XTRA, MF 8460 XTRA, MF 8470 XTRA, MF 8480 XTRA, MF 8650, MF 8660 , MF 8670, MF 8680, MF 8690, MF 5610 Dyna-4, MF 6612 Dyna-4, MF 6613 Dyna-6, MF 6613 Dyna-4, MF 6614 Dyna-VT, MF 6614 Dyna-6, MF 6615 Dyna-4, MF 6615 Dyna-VT, MF 6615 Dyna-6, MF 6616 Dyna-VT, MF 6616 Dyna-6, MF 7614 Dyna-4, MF 7615 Dyna-VT, MF 7615 Dyna-6, MF 7615 Dyna-4, MF 7616 Dyna-VT, MF 7616 Dyna-6, MF 7618 Dyna-VT, MF 7618 Dyna-6, MF 7619 Dyna-VT, MF 7619 Dyna-6, MF 7620 Dyna-VT, MF 7620 Dyna-6, MF 7622 Dyna-VT, MF 7622 Dyna-6, MF 7624 Dyna-VT, MF 7624 Dyna-6, MF 7626 Dyna-6, MF 6712 S Dyna-4, MF 6713 S Dyna-4, MF 6714 S Dyna-4 T4F, MF 6715 S Dyna-4 T4F, MF 6713 S Dyna-6, MF 6713 S Dyna-VT, MF 6714 S Dyna-6, MF 6714 S Dyna-VT, MF 6715 S Dyna-6 T4F, MF 6715 S Dyna-VT, MF 6716 S Dyna-6 T4F, MF 6716 S Dyna-VT T4F, MF 6718 S Dyna-6, MF 6718 S Dyna-VT, MF 6714 S Dyna-6 T4F, MF 6714 S Dyna-VT T4F, MF 7719 Dyna-6, MF 7715 DYNA-4, MF 7716 Dyna-6, MF 7714 Dyna-4, MF 7726 Dyna-VT, MF6713 S Dyna-6 T5, MF 6713 S Dyna-VT T5, MF 6714 S Dyna-6 T5, MF 6714 S Dyna-VT T5, MF 6715 S Dyna-6 T5, MF 6715 S Dyna-VT T5, MF 6716 S Dyna-6 T5, MF 6716 S Dyna-VT T5, MF 6718 S Dyna-6 T5, MF 6718 S Dyna-VT T5, MF 7714 S Fits Valtra ModelsS232, S262, S292, S322, S352, No longer used Refer to 11647, No longer used Refer to 11648, No longer used Refer to 11649, T195 (replaced by J3591), T210 (replaced by J3592), T230 (replaced by J3593), T250 (replaced by J3594), S233, S263, S293, S294, S324 SmartTouch MR19
$47.00 $42.00
AGCO AGCO | Spring - F718701030050
Fitment Information Fits Fendt Models309 Vario SCR, 310 Vario SCR, 311 Vario SCR, 312 Vario SCR, 313 Vario SCR, 411 Vario, 412 Vario, 413 Vario, 414 Vario, 415 Vario, 714 Vario S4, 716 Vario S4, 718 Vario S4, 720 Vario S4, 722 Vario S4, 724 Vario S4, 712 Vario, 714 Vario, 716 Vario, 718 Vario, FAVORIT 711 VARIO, 716 Vario T2, 714 Vario SCR, 716 Vario SCR, 718 Vario SCR, 720 Vario SCR, 722 Vario SCR, 724 Vario SCR, 822 Vario S4, 824 Vario S4, 826 Vario S4, 828 Vario S4, 818 Vario, 820 Vario, 819 Vario SCR, 822 Vario SCR, 824 Vario SCR, 826 Vario SCR, 828 Vario SCRFits Massey Ferguson ModelsMF 6290 2WD, MF 6290 4WD, MF 6280 2WD, MF 6280 4WD, MF 6270 2WD, MF 6270 4WD, MF 6265 2WD, MF 6265 4WD, MF 6260 2WD, MF 6260 4WD, MF 6255 2WD, MF 6255 4WD, MF 6245 2WD, MF 6245 4WD, MF 6235 2WD, MF 6235 4WD, MF 8260 4WD, MF 8250 2WD, MF 8250 4WD, MF 8280 4WD, MF 8270 4WD, MF 8260 2WD, MF 8240 2WD, MF 8240 4WD, MF 8220 2WD, MF 8220 4WD, MF 8210 2WD, MF 8210 4WD, 6465 Dyna-6, 6475 Dyna-6, 6480 Dyna-6, MF 6497, MF 6499, MF 6465, MF 6475, MF 6480, MF 6490, MF 6495, MF 6485, MF 6445, MF 6455, MF 6460, MF 6470, MF 6497 XTRA, MF 6499 XTRA, 6485, MF 6490 T3, MF 6495 T3, MF 6470 T3, MF 6460 T3, 6465, MF 6475 T3, 6480, MF 6445 T3, MF 6455 T3, MF 6497 T3, MF 6499 T3, MF 7465 T3 SISU, MF 7475 T3 SISU, MF 7480 T3 SISU, MF 7465, MF 7475, MF 7480, MF 7485, MF 7490, MF 7495, MF 7485 T3, MF 7490 T3, MF 7495 T3, MF 7497, MF 7499, MF 8450, MF 8460, MF 8470, MF 8480, MF 8450 XTRA, MF 8460 XTRA, MF 8470 XTRA, MF 8480 XTRA, MF 8650, MF 8660 , MF 8670, MF 8680, MF 8690, MF 5610 Dyna-4, MF 6612 Dyna-4, MF 6613 Dyna-6, MF 6613 Dyna-4, MF 6614 Dyna-VT, MF 6614 Dyna-6, MF 6615 Dyna-4, MF 6615 Dyna-VT, MF 6615 Dyna-6, MF 6616 Dyna-VT, MF 6616 Dyna-6, MF 7614 Dyna-4, MF 7615 Dyna-VT, MF 7615 Dyna-6, MF 7615 Dyna-4, MF 7616 Dyna-VT, MF 7616 Dyna-6, MF 7618 Dyna-VT, MF 7618 Dyna-6, MF 7619 Dyna-VT, MF 7619 Dyna-6, MF 7620 Dyna-VT, MF 7620 Dyna-6, MF 7622 Dyna-VT, MF 7622 Dyna-6, MF 7624 Dyna-VT, MF 7624 Dyna-6, MF 7626 Dyna-6, MF 6712 S Dyna-4, MF 6713 S Dyna-4, MF 6714 S Dyna-4 T4F, MF 6715 S Dyna-4 T4F, MF 6713 S Dyna-6, MF 6713 S Dyna-VT, MF 6714 S Dyna-6, MF 6714 S Dyna-VT, MF 6715 S Dyna-6 T4F, MF 6715 S Dyna-VT, MF 6716 S Dyna-6 T4F, MF 6716 S Dyna-VT T4F, MF 6718 S Dyna-6, MF 6718 S Dyna-VT, MF 6714 S Dyna-6 T4F, MF 6714 S Dyna-VT T4F, MF 7719 Dyna-6, MF 7715 DYNA-4, MF 7716 Dyna-6, MF 7714 Dyna-4, MF 7726 Dyna-VT, MF6713 S Dyna-6 T5, MF 6713 S Dyna-VT T5, MF 6714 S Dyna-6 T5, MF 6714 S Dyna-VT T5, MF 6715 S Dyna-6 T5, MF 6715 S Dyna-VT T5, MF 6716 S Dyna-6 T5, MF 6716 S Dyna-VT T5, MF 6718 S Dyna-6 T5, MF 6718 S Dyna-VT T5, MF 7714 S Fits Valtra ModelsS232, S262, S292, S322, S352, No longer used Refer to 11647, No longer used Refer to 11648, No longer used Refer to 11649, T195 (replaced by J3591), T210 (replaced by J3592), T230 (replaced by J3593), T250 (replaced by J3594), S233, S263, S293, S294, S324 SmartTouch MR19
$47.00 $42.00
Sparex Sparex Taper Roller Bearing (32013) - S.18247
Sparex Taper Roller Bearing (32013) - S.18247 This Sparex Taper Roller Bearing is a high-quality replacement part for a variety of agricultural machinery. It features an inner diameter of 65mm, an outer diameter of 100mm, and a width of 23mm. This bearing is a direct replacement for part number 163679 and is also related to part number 18246. Product Specifications Alternative to: 163679 b (mm): 17.5 B (mm): 23 Bearing Reference: 32013 Bearing type: Taper Roller Bearing Brand: Sparex d (mm): 65 D (mm): 100 Inner Ø (mm): 65 Metric or Imperial: Metric Outer Ø (mm): 100 Related products: 18246 T (mm): 23 Tariff Code: 8482200000 Width (mm): 23 Suitable For This bearing is suitable for the following models: Allis Chalmers: 6060, 6070 Case IH / International Harvester: AVJ55, AVJ60, AVJ70, VJ60 Fiat: 446, 45-66, 466, 50-66, 55-66, 55-76, 55-86, 55-90, 566, 60-66, 60-76, 60-90, 60-93, 60-94, 62-86, 65-66, 65-90, 65-93, 65-94, 70-66, 70-76, 72-86, 80-66, 80-76, 82-86 Landini: 5560, 5860, 5870, 6060, 6070, 6560, 6860, 6870, 6880, 7860, 7880, 8860, 8870, 8880, 9080, 9880, BLIZZARD 50, BLIZZARD 60, BLIZZARD 65, BLIZZARD 75, BLIZZARD 85, BLIZZARD 95, LARGE 10000, LARGE 13000 Massey Ferguson: 1007, 1014, 1024, 275, 290, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 3115, 3120, 3125, 3140, 334, 340, 350, 353, 353LX, 354, 355, 360, 3610, 362, 363, 3630, 3635, 363LX, 364, 3645, 365, 3650, 3655, 3660, 3670, 3680, 3690, 373, 373LX, 374, 375, 375E BRAZILIAN, 377, 383, 383LX, 387, 390, 390E BRAZILIAN, 390T, 393, 393LX, 396, 397, 398, 399, 4225, 4235, 4245, 4255, 4260, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4365, 4370, 6110, 6120, 6140, 6150, 6160, 6170, 6180, 6190, 6235, 6245, 6255, 6260, 6265, 6290, 8110, 8120, 8130, 8140, 8150, 8160, 8210, 8220, 8240, 8250, 8260 Manufacturer Information Allis Chalmers: 72092837 Fiat: 24903460 John Deere: AL113279 Massey Ferguson: 391339X1
$79.00 $71.00
Sparex Sparex Taper Roller Bearing (HM89446/HM89410) - S.42945
Sparex Taper Roller Bearing (HM89446/HM89410) - S.42945 Discover the reliability and performance of the Sparex Taper Roller Bearing, designed to meet the demanding needs of various machinery applications. With precise dimensions and robust construction, this bearing ensures optimal functionality and longevity. Product Specifications Inner Diameter (ID): 34.925 mm Outer Diameter (OD): 76.2 mm Width: 29.37 mm b (mm): 23.02 B (mm): 28.575 Bearing Reference: HM89446/HM89410 Bearing Type: Taper Roller Bearing Brand: Sparex Metric or Imperial: Metric Tariff Code: 8482200000 Related Products: 42642 Compatibility This bearing is compatible with a range of machinery, including: Landini: 5830, 6030, 7860, 8860, 8880, 9060, 9080, 9880, ATLAS 100, ATLAS 80, ATLAS 85, ATLAS 90, LARGE 10000, LARGE 12500, LARGE 13000, LARGE 14500, LARGE 16000, LARGE 16500, LARGE 17500, LARGE 19000, MYTHOS 100, MYTHOS 90 Massey Ferguson: 1004, 1004T, 240, 253, 2620, 2625, 263, 2640, 2645, 2680, 2685, 2720, 2725, 3070, 3075, 3080, 3085, 3090, 3095, 3115, 3120, 3125, 3140, 342, 352, 3610, 362, 3630, 3635, 3645, 3650, 3655, 3670, 3680, 3690, 372, 382, 398, 399, 6170, 6180, 6190, 6270, 6280, 6290, 698, 698T, 699, 8110, 8120, 8130, 8140, 8150, 8160, 8210, 8220, 8240, 8250, 8260 OEM Fitment Information This bearing is designed to fit various OEM specifications, including: Allis Chalmers: 70244162V Massey Ferguson: 3426619M1, 212609M1, 212609V1, 212610M1, HM89446NHM89410N Upgrade your machinery with the Sparex Taper Roller Bearing for enhanced performance and durability. Order now to ensure your equipment runs smoothly!
$58.00 $52.00
Sparex Sparex Taper Roller Bearing (32209) - S.18257
Sparex Taper Roller Bearing (32209) - S.18257 This Sparex Taper Roller Bearing is a high-quality replacement part for a variety of agricultural machinery. It is a direct replacement for part number 129583 and is suitable for use in Massey Ferguson and Zetor tractors. Key Features: Bearing Reference: 32209 Bearing type: Taper Roller Bearing Inner Diameter (ID): 45mm Outer Diameter (OD): 85mm Width: 24.75mm Metric or Imperial: Metric Suitable For: Massey Ferguson: 3670, 3690, 8150, 8160, 8240, 8250, 8260 Zetor: 10520, 2011, 2511, 7520, 8520, 8621, 9520, 9621 Manufacturer Information: Massey Ferguson: 1806593M1, X619054100007, 1440648x1 Zetor: 971416 This Sparex Taper Roller Bearing is a reliable and durable replacement part that is sure to meet your needs. Order yours today!
$29.00 $26.00
Sparex Sparex Plummer Block Bearing Insert (UC208-24) - S.18586
Sparex Plummer Block Bearing Insert (UC208-24) - S.18586 This Sparex Plummer Block Bearing Insert is a high-quality replacement part for a variety of Massey Ferguson tractors. It features a 1 1/2" inner diameter, 80mm outer diameter, and 49.2mm width. This bearing insert is designed to provide long-lasting performance and reliability. Product Specifications Alternative to: 129700B Bearing Reference: UC208-24 Bearing type: UC Brand: Sparex Inner Ø: 1 1/2" (38.1mm) Outer Ø: 80mm Width: 49.2mm Seal Type: 2RS Tariff Code: 8482200000 Suitable For This bearing insert is suitable for the following Massey Ferguson tractors: 3635 3645 3655 3670 3690 8110 8120 8130 8140 8150 8160 8170 8180 8210 8220 8240 8250 8260 8270 8280 Manufacturer Information This bearing insert is manufactured by Sparex and is a direct replacement for the following OEM parts: Bearings Reference: UC20824, UC208 Massey Ferguson: 3712873M1
$47.00 $42.00
AGCO AGCO | Shock Absorber - F930500030070
Fitment Information Fits Fendt Models309 Vario, 310 Vario, 311 Vario, 312 Vario, FARMER 309 C, FARMER 304 LS, FARMER 308 LS, FARMER 309 LS, FARMER 307 LSA, FARMER 308 LSA, FARMER 309 LSA, FARMER 310 LSA, FARMER 311 LSA, FARMER 312 LSA, Farmer 307 C, Farmer 308 C, Farmer 409 Vario, Farmer 410 Vario, Farmer 411 Vario, Farmer 412 Vario, 411 Vario, 412 Vario, 413 Vario, 414 Vario, 415 Vario, FAVORIT 816, FAVORIT 818, FAVORIT 822, FAVORIT 824, XYLON 520, XYLON 522, XYLON 524, 370 GT, 380 GTA TURBO, F345 GT, F360 GT, F365 GT, F370 GT, F380 GT, F390 GT, F395 GT, 712 Vario, 714 Vario, 716 Vario, 718 Vario, FAVORIT 509 C, FAVORIT 510 C, FAVORIT 511 C, FAVORIT 512 C, FAVORIT 514 C, FAVORIT 515 C, FAVORIT 711 VARIO, 716 Vario T2, Favorit 916 Vario, Favorit 920 Vario, Favorit 924 Vario, Favorit 926 Vario, 930 Vario TMS, 818 Vario, 820 VarioFits Massey Ferguson ModelsMF 6110 2WD, MF 6110 4WD, MF 6120 2WD, MF 6120 4WD, MF 6130 2WD, MF 6130 4WD, MF 6140 2WD, MF 6140 4WD, MF 6150 2WD, MF 6150 4WD, MF 6160 2WD, MF 6160 4WD, MF 6170 2WD, MF 6170 4WD, MF 6180 2WD, MF 6180 4WD, MF 6190 2WD, MF 6190 4WD, MF 8170 4WD, MF 8110 2WD, MF 8110 4WD, MF 8120 2WD, MF 8120 4WD, MF 8130 2WD, MF 8130 4WD, MF 8140 2WD, MF 8140 4WD, MF 8150 2WD, MF 8150 4WD, MF 8160 2WD, MF 8160 4WD, MF 4315 2WD, MF 4315 4WD, MF 4325 2WD, MF 4325 4WD, MF 4335 2WD, MF 4335 4WD, MF 4345 2WD, MF 4345 4WD, MF 4355 2WD, MF 4355 4WD, MF 4360 2WD, MF 4360 4WD, MF 4365 2WD, MF 4365 4WD, MF 4370 2WD, MF 4370 4WD, MF 4215 2WD, MF 4215 4WD, MF 4220 2WD, MF 4220 4WD, MF 4225 2WD, MF 4225 4WD, MF 4235 2WD, MF 4235 4WD, MF 4240 2WD, MF 4245 2WD, MF 4245 4WD, MF 4255 2WD, MF 4255 4WD, MF 4260 2WD, MF 4260 4WD, MF 4265 2WD, MF 4270 2WD, MF 4270 4WD, MF 6290 2WD, MF 6290 4WD, MF 6280 2WD, MF 6280 4WD, MF 6270 2WD, MF 6270 4WD, MF 6265 2WD, MF 6265 4WD, MF 6260 2WD, MF 6260 4WD, MF 6255 2WD, MF 6255 4WD, MF 6245 2WD, MF 6245 4WD, MF 6235 2WD, MF 6235 4WD, MF 8260 4WD, MF 8250 2WD, MF 8250 4WD, MF 8280 4WD, MF 8270 4WD, MF 8260 2WD, MF 8240 2WD, MF 8240 4WD, MF 8220 2WD, MF 8220 4WD, MF 8210 2WD, MF 8210 4WD, MF 6497, MF 6499, MF 6465, MF 6475, MF 6480, MF 6490, MF 6495, MF 6485, MF 6445, MF 6455, MF 6460, MF 6470, MF 6497 XTRA, MF 6499 XTRA, 6485, MF 6490 T3, MF 6495 T3, MF 6470 T3, MF 6460 T3, 6465, MF 6475 T3, 6480, MF 6445 T3, MF 6455 T3, MF 6497 T3, MF 6499 T3, MF 7465, MF 7475, MF 7480, MF 7485, MF 7490, MF 7495, MF 7485 T3, MF 7490 T3, MF 7495 T3, MF 7497, MF 7499, MF 8460, MF 8470, MF 8480, MF 8450 XTRA, MF 8460 XTRA, MF 8470 XTRA, MF 8480 XTRA, MF 9690, MF 9790, MF 9895, MF 5445, MF 5455, 5460, 5465, MF 5425, MF 5435, MF 5470 T3, MF 5480 T3, MF 5465 T3, MF 5475 T3, MF 5460 SISU, MF 5445 T3, MF 5455 T3, MF 5410 T3, MF 5420 T3, MF 5430 T3, MF 5440 T3, MF 5450 T3Fits Valtra ModelsValtra Fitment Information Is Not Currently Available
$160.00 $144.00
Sparex Main Shaft | Sparex Part No.S.107338
Main Shaft | Sparex Part No. S.107338 Upgrade your agricultural machinery with the high-quality Main Shaft from Sparex. Designed for optimal performance, this 8-speed shaft is an essential component for various models, ensuring smooth operation and reliability in the field. Product Specifications Brand: Sparex Related Products: 107340, 107341, 107346, 41577 Tariff Code: 8708409900 Compatibility Information This Main Shaft is suitable for a wide range of agricultural machinery, including: AGCO RT140A Challenger MT434, MT575B Landini 7830 Massey Ferguson models: 1004, 1004T, 1080, 1200, 1250, 133, 135, 145, 148, 152, 158, 165, 168, 185, 188, 240, 250, 255, 260, 265, 275, 283, 285 (FR), 290, 292 BRAZILIAN, 297 BRAZILIAN, 298, 299 BRAZILIAN, 375E BRAZILIAN, 390E BRAZILIAN, 415 BRAZILIAN, 425 BRAZILIAN, 435 BRAZILIAN, 440 BRAZILIAN, 445 BRAZILIAN, 460 BRAZILIAN, 465 BRAZILIAN, 475 BRAZILIAN, 481 BRAZILIAN, 492 BRAZILIAN, 560, 565, 575, 590, 592, 595, 650 BRAZILIAN, 660 BRAZILIAN, 675, 680 BRAZILIAN, 690, 698, 699, 8170, 8180, 8210, 8220, 8240, 8250, 8260, 8270, 8280 Manufacturer Information Part Number: Massey Ferguson 1866538M2 Ensure your machinery operates at its best with the Sparex Main Shaft, a reliable choice for farmers and agricultural professionals alike.
$17.00 $15.00
AGCO AGCO | Seal Kit, Directional Valve - F716961020020
For maintenance or repair, always install genuine seals for reliability and performance. Fitment Information Fits Fendt Models411 Vario, 412 Vario, 413 Vario, 414 Vario, 415 Vario, 712 Vario, 714 Vario, 716 Vario, 718 Vario, FAVORIT 711 VARIO, 716 Vario T2, Favorit 916 Vario, Favorit 920 Vario, Favorit 924 Vario, Favorit 926 Vario, 930 Vario TMS, 818 Vario, 820 VarioFits Massey Ferguson ModelsMF 6290 2WD, MF 6290 4WD, MF 6280 2WD, MF 6280 4WD, MF 6270 2WD, MF 6270 4WD, MF 6265 2WD, MF 6265 4WD, MF 6260 2WD, MF 6260 4WD, MF 6255 2WD, MF 6255 4WD, MF 6245 2WD, MF 6245 4WD, MF 6235 2WD, MF 6235 4WD, MF 8250 2WD, MF 8250 4WD, MF 8280 4WD, MF 8270 4WD, MF 8260 2WD, MF 8240 2WD, MF 8240 4WD, MF 8220 2WD, MF 8220 4WD, MF 8210 2WD, MF 8210 4WD, 6465 Dyna-6, 6475 Dyna-6, 6480 Dyna-6, MF 6497, MF 6499, MF 6465, MF 6475, MF 6480, MF 6490, MF 6495, MF 6485, MF 6445, MF 6455, MF 6460, MF 6470, MF 6497 XTRA, MF 6499 XTRA, 6485, MF 6490 T3, MF 6495 T3, MF 6470 T3, MF 6460 T3, 6465, MF 6475 T3, 6480, MF 6445 T3, MF 6455 T3, MF 6497 T3, MF 6499 T3, MF 7465 T3 SISU, MF 7475 T3 SISU, MF 7480 T3 SISU, MF 7465, MF 7475, MF 7480, MF 7485, MF 7490, MF 7495, MF 7485 T3, MF 7490 T3, MF 7495 T3, MF 7497, MF 7499, MF 8450, MF 8460, MF 8470, MF 8480, MF 8450 XTRA, MF 8460 XTRA, MF 8470 XTRA, MF 8480 XTRA, MF 6613 Dyna-6, MF 6614 Dyna-VT, MF 6614 Dyna-6, MF 6615 Dyna-VT, MF 6615 Dyna-6, MF 6616 Dyna-VT, MF 6616 Dyna-6, MF 7615 Dyna-VT, MF 7615 Dyna-6, MF 7616 Dyna-VT, MF 7616 Dyna-6, MF 7618 Dyna-VT, MF 7618 Dyna-6, MF 7619 Dyna-VT, MF 7619 Dyna-6, MF 7620 Dyna-VT, MF 7620 Dyna-6, MF 7622 Dyna-VT, MF 7622 Dyna-6, MF 7624 Dyna-VT, MF 7624 Dyna-6, MF 7626 Dyna-6Fits Valtra ModelsValtra Fitment Information Is Not Currently Available
$69.00 $62.00
Sparex Metric Rotary Shaft Seal, 40 x 60 x 18.50mm | Sparex Part No.S.13296
Metric Rotary Shaft Seal, 40 x 60 x 18.50mm | Sparex Part No. S.13296 Product Specifications A (mm): 60 B (mm): 40 Brand: Sparex C (mm): 18.50 Inner Ø (mm): 40 Metric or Imperial: Metric Outer Ø (mm): 60 Related Products: 43334 Tariff Code: 4016930090 Width (mm): 18.50 Suitable For This rotary shaft seal is compatible with a variety of machinery, including: Case IH / International Harvester: 1046, 1055, 1055XL, 1056, 1056XL, 1246, 1255, 644, 743, 743XL, 744, 745, 745S, 745XL, 844, 844S, 844XL, 856, 856XL, 946, 955, 955XL, 956, 956XL Ford / New Holland: 7630, 8030, TW10, TW20, TW30, TW35 John Deere: 4040, 4050, 4240, 4240S, 4250, 4350, 4450, 4650, 4850 Landini: 10000, 13000, 14500, 16500, 5860, 6060, 6860, 6870, 6880, 7560, 7860, 7870, 7880, 8560, 8860, 8880, 9060, 9080, 9880, ALPINE 65, ALPINE 75, ALPINE 85, ATLAS 100, ATLAS 80, ATLAS 85, ATLAS 90, BLIZZARD 50, BLIZZARD 60, BLIZZARD 65, BLIZZARD 75, BLIZZARD 85, BLIZZARD 95, GLOBUS 50, GLOBUS 55, LARGE 10000, LARGE 12500, LARGE 13000, LARGE 14500, LARGE 16500, LEGEND 105, LEGEND 115, LEGEND 130, LEGEND 140, LEGEND 145, LEGEND 160, LEGEND 165, LEGEND 180, LEGEND 185, MYTHOS 100, MYTHOS 90, NEW LEGEND 140, NEW LEGEND 145, NEW LEGEND 160, NEW LEGEND 165, NEW LEGEND 180, NEW LEGEND 185 Massey Ferguson: 290 BRAZILIAN, 292 BRAZILIAN, 297 BRAZILIAN, 298 BRAZILIAN, 299 BRAZILIAN, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 3115, 3120, 3125, 3140, 340, 350, 355, 360, 3610, 362, 3630, 3635, 3645, 365, 3650, 3655, 3670, 3680, 3690, 375, 390, 390E BRAZILIAN, 390T, 396, 398, 399, 445 BRAZILIAN, 460 BRAZILIAN, 465 BRAZILIAN, 475 BRAZILIAN, 6170, 6180, 6190, 6270, 6280, 6290, 8110, 8120, 8130, 8140, 8150, 8160, 8210, 8220, 8240, 8250, 8260 Manufacturer Information OEM fitment information includes: Case IH / International Harvester: 3223862R1, 3146794R1, 3223861R2, 1395410710, 85821295, 81927263, 81927189 Ford / New Holland: ZP1927837, 81927190, 81927263, CAR126403, 82920208, ZP1927263, 85821295, 81927191, 3146794R1, 445867A1 John Deere: AL37300 Landini: 3428064M1 Massey Ferguson: 3428064M1, 040963R1, VA126403, 000051723
$54.00 $48.00
AGCO AGCO | Casset Ring - H931303220130
Fitment Information Fits Fendt Models927 Vario S4, 930 Vario S4, 933 Vario S4, 936 Vario S4, 939 Vario S4, 922 Vario, 924 Vario, 927 Vario, 930 Vario, 933 Vario, 936 Vario, 924 Vario SCR, 927 Vario SCR, 930 Vario SCR, 933 Vario SCR, 936 Vario SCR, 939 Vario SCRFits Massey Ferguson ModelsMF 354F 2WD, MF 354F 4WD, MF 364F 2WD, MF 364F 4WD, MF 374F 2WD, MF 374F 4WD, MF 384F 2WD, MF 384F 4WD, MF 394F 2WD, MF 394F 4WD, MF 364S 2WD, MF 364S 4WD, MF 374S 2WD, MF 374S 4WD, MF 384S 2WD, MF 384S 4WD, MF 394S 2WD, MF 394S 4WD, MF 364V 2WD, MF 364V 4WD, MF 374V 2WD, MF 374V 4WD, MF 3050 2WD, MF 3050 4WD, MF 3060 2WD, MF 3060 4WD, MF 3070 2WD, MF 3070 4WD, MF 3080 2WD, MF 3080 4WD, MF 3090 2WD, MF 3090 4WD, MF 3095 2WD, MF 3095 4WD, MF 3115 4WD, MF 3125 2WD, MF 3125 4WD, MF 3065 4WD, MF 3085 2WD, MF 3085 4WD, MF 3120 2WD, MF 3120 4WD, MF 3075 2WD, MF 3075 4WD, MF 3610 4WD, MF 3630 2WD, MF 3630 4WD, MF 3650 2WD, MF 3650 4WD, MF 3680 2WD, MF 3680 4WD, MF 3645 2WD, MF 3645 4WD, MF 3655 2WD, MF 3655 4WD, MF 3670 2WD, MF 3670 4WD, MF 3690 2WD, MF 3690 4WD, MF 3635 2WD, MF 3635 4WD, MF 383 2WD, MF 383 4WD, MF 393 2WD, MF 393 4WD, MF 397 2WD, MF 397 4WD, MF 364C, MF 1114 2WD, MF 1114 4WD, MF 1134 2WD, MF 1134 4WD, MF 6150 2WD, MF 6170 2WD, MF 6170 4WD, MF 6180 2WD, MF 6180 4WD, MF 6190 2WD, MF 6190 4WD, MF 8110 2WD, MF 8110 4WD, MF 8120 2WD, MF 8120 4WD, MF 8130 2WD, MF 8130 4WD, MF 8140 2WD, MF 8140 4WD, MF 6290 2WD, MF 6290 4WD, MF 6280 2WD, MF 6280 4WD, MF 6270 2WD, MF 6270 4WD, MF 8250 2WD, MF 8240 2WD, MF 8240 4WD, MF 8220 2WD, MF 8220 4WD, MF 8210 2WD, MF 8210 4WD, MF 398 2WD, MF 398 4WD, MF 399 2WD, MF 399 4WD, MF 362 2WDFits Valtra ModelsValtra Fitment Information Is Not Currently Available
$242.00 $218.00
Sparex Safety Linch Pin, Pin Ø10mm x 58mm | Sparex Part No.S.29110
Safety Linch Pin, Pin Ø10mm x 58mm | Sparex Part No.S.29110 Product Specifications Alternative to: 29111 Pin Diameter (A Ø): 10 mm Usable Length (B): 55 mm Brand: Sparex Total Length (C): 58 mm Duty: Standard Type: Safety Notes: Spring retained linch pin Pin Diameter (Pin Ø): 10 mm Tariff Code: 7318290090 Compatibility Information This safety linch pin is suitable for a variety of Massey Ferguson models, including: 6270 6280 6290 6465 6475 6480 6485 6490 6495 6497 6499 7465 7475 7480 7485 7485 DYNA VT/DYNA STEP 7490 7495 8210 8220 8240 8250 8260 8270 8280 8450 8460 8470 8480 Manufacturer Information OEM Part Number: Massey Ferguson 3788605M1
$3.00 $2.00
Sparex Resistor for Blower Motor | Sparex Part No.S.129813
Resistor for Blower Motor | Sparex Part No. S.129813 Enhance the performance of your agricultural machinery with the Resistor for Blower Motor from Sparex. This high-quality component is designed to ensure optimal functionality of your blower motor, providing reliable operation for your equipment. Product Specifications Alternative to: 106829 Brand: Sparex Tariff Code: 8708299000 Compatible Models This resistor is suitable for a variety of models, including: Fendt: 8300, 8350, 8370 P, 8400 P Massey Ferguson: 1004T, 1007, 1014, 1024, 274, 294, 3050, 3060, 3065, 3070, 3080, 3085, 3090, 3095, 3115, 3120, 3125, 3610, 3630, 3635, 3645, 3650, 3655, 3670, 3680, 3690, 377, 387, 397, 397T, 6120, 6130, 6140, 6150, 6160, 6170, 6180, 6190, 6235, 6245, 6255, 6260, 6265, 6270, 6280, 6290, 660, 675, 680 BRAZILIAN, 690, 698, 699, 7250, 7252, 7254, 7256, 7272, 7274, 7276, 7278, 7280, 7282, 8110, 8120, 8130, 8140, 8150, 8160, 8170, 8180, 8210, 8220, 8240, 8250, 8260, 8270, 8280 Manufacturer Information OEM part numbers include: Fendt: 3304510M92 Massey Ferguson: 3304510M92, 3304510M91 Upgrade your machinery with the Resistor for Blower Motor and experience improved efficiency and reliability. Order now to ensure your equipment runs smoothly!
$71.00 $64.00
Sparex Raw Edge Moulded Cogged Belt - AVX Section - Belt No. AVX13x1500 | Sparex Part No.S.18655
Raw Edge Moulded Cogged Belt - AVX Section - Belt No. AVX13x1500 | Sparex Part No.S.18655 This high-quality Raw Edge Moulded Cogged Belt is designed for use in a variety of agricultural applications. It features an AVX13 section and a belt number of AVX13x1500. This belt is manufactured by Sparex (Agribelt) and is a direct replacement for a number of OEM parts. Product Specifications Belt No.: AVX13x1500 Brand: Sparex (Agribelt) Datum length LD (mm): 1482 Depth (mm): 10 Depth ins: 3/8 Effective Length (ins): 58 Effective Length (mm): 1482 Inside length Li (mm): 1437 Inside length Li ins: 57 Outside length La (ins): 59 Outside length La (mm): 1500 Pitch Length (Lp) (Lw):: 1482 Related products: 14683, 18639, 18643 Section: AVX13 Tariff Code: 4010390090 Top Width x Depth: 13 x 10mm (1/2'' x 3/8'') Type: Raw Edge Moulded Cogged Fan Belt Width (ins): 1/2 Width (mm): 13 Suitable For This belt is suitable for use in the following machines: John Deere 4040 Massey Ferguson 2640, 2675, 2680, 2685, 2720, 2725, 3085, 3095, 3115, 3120, 3525, 3545, 3630, 365, 3650, 375, 390, 390T, 398, 6160, 6170, 6180, 698, 8210, 8240, 8250, 8260 Perkins 1006-6 (YA), 1006-6T (YB), A4.236 (LD), A4.248 (LF), A6.354.1 (TG), AT6.354.4 (TU), T4.236 (LJ) Manufacture Information This belt is a direct replacement for the following OEM parts: Ford / New Holland 80921698 John Deere R46113 Landini 3617180M91 Massey Ferguson 3617180M91 Order your Raw Edge Moulded Cogged Belt today and get it delivered fast!
$23.00 $21.00
Sparex Raw Edge Moulded Cogged Belt - AVX Section - Belt No. AVX13x1350 | Sparex Part No.S.18649
Raw Edge Moulded Cogged Belt - AVX Section - Belt No. AVX13x1350 | Sparex Part No.S.18649 This Raw Edge Moulded Cogged Belt is designed for use in a variety of agricultural applications. It features an AVX13 section and a belt number of AVX13x1350. This belt is manufactured by Sparex (Agribelt) and is a high-quality replacement for original equipment belts. Product Specifications Belt No.: AVX13x1350 Brand: Sparex (Agribelt) Datum length LD (mm): 1332 Depth (mm): 10 Depth ins: 3/8 Effective Length (ins): 52 Effective Length (mm): 1332 Inside length Li (mm): 1287 Inside length Li ins: 51 Outside length La (ins): 53 Outside length La (mm): 1350 Pitch Length (Lp) (Lw):: 1332 Related products: 14683, 18639 Section: AVX13 Tariff Code: 4010390090 Top Width x Depth: 13 x 10mm (1/2'' x 3/8'') Type: Raw Edge Moulded Cogged Fan Belt Width (ins): 1/2 Width (mm): 13 Suitable For Case IH / International Harvester 1046 1055 1055XL 1056 1056XL 1246 1255 1255XL 1455 1455XL 523 553 624 654 724 824 946 955 955XL 956 956XL Massey Ferguson 2620 2640 2645 2680 3050 3060 3070 3080 3090 3505 3610 660 BRAZILIAN 760 8240 8250 8260 830 835 840 Perkins A4.236 (LD) A4.248 (LF) A6.354.4 (TW) T4.236 (LJ) Manufacture Information Belt References AVX13X1350 Case IH / International Harvester: 3218951R1 Ford / New Holland: 80398622 Massey Ferguson: 130100000000, 3381364M91, 3581611M1 Steyr: 130100130071, 130100130110 Zetor: 10013903
$27.00 $25.00
Sparex Radiator Cap - S.41517
Radiator Cap - S.41517 Ensure optimal performance and reliability with the Radiator Cap - S.41517 from Sparex. This high-quality metal radiator cap is designed to maintain the pressure in your cooling system, preventing overheating and ensuring your machinery runs smoothly. Product Specifications Brand: Sparex Inner Diameter: 38 mm Material: Metal Overall Height: 28 mm Overall Width: 77 mm Pressure: 1 bar (10 psi) Related Products: 107203, 107205, 40031 Tariff Code: 8708913520 Threaded: No Vented: No Compatibility Information This radiator cap is suitable for a variety of models, including: Case IH / International Harvester: 238, 248, 258, 268, 288, 3210, 3220, 3230, 385, 395, 4210, 4220, 4230, 4240, 454, 474, 484, 485, 485XL, 495, 495XL, 574, 584, 585, 585XL, 595, 595XL, 674, 684, 685, 685XL, 695, 695XL, 784, 785, 785XL, 795, 795XL, 884, 885, 885XL, 895, 895XL, 995XL, HYDRO 84 John Deere: 2250, 2355, 2450, 2555, 2650, 2755, 2850, 2955, 3050, 3155, 3350, 3650, 7600, 7700, 7800, 8100, 8200, 8300, 8400 Landini: 16000, 5830, 6030, 7830, 9500, LARGE 16000, LARGE 9550 Massey Ferguson: 1004, 1004T, 122, 130, 135, 135 US BUILT, 150, 165, 165 US BUILT, 175, 175 US BUILT, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 240, 243, 250 BRAZILIAN, 2500, 253, 2620, 263, 2640, 265 BRAZILIAN, 2680, 2720, 275 BRAZILIAN, 283 BRAZILIAN, 290 BRAZILIAN, 292 BRAZILIAN, 297 BRAZILIAN, 298 BRAZILIAN, 299 BRAZILIAN, 30, 3050, 3060, 3065, 3070, 3075, 3085, 3095, 31, 3115, 3120, 3125, 3165, 342, 35, 35 US BUILT, 350, 352, 355, 360, 362, 3635, 3645, 365, 3655, 3670, 3680, 3690, 372, 375, 375E BRAZILIAN, 382, 390, 390E BRAZILIAN, 390T, 396, 398, 399, 40, 415 BRAZILIAN, 4215, 4220, 4225, 4235, 4245, 425 BRAZILIAN, 4255, 4260, 4265, 4270, 4315, 4345, 435 BRAZILIAN, 4355, 4360, 4365, 4370, 440 BRAZILIAN, 445 BRAZILIAN, 4500, 460 BRAZILIAN, 465 BRAZILIAN, 475 BRAZILIAN, 50, 5360 BRAZILIAN, 5365 BRAZILIAN, 6120, 6130, 6140, 6150, 6160, 6170, 6180, 6190, 6235, 6245, 6255, 6260, 6265, 6270, 6280, 6290, 6497, 6499, 65, 65 US BUILT, 6500, 670, 675, 690, 698, 698T, 699, 8110, 8120, 8130, 8140, 8150, 8160, 8170, 8180, 8210, 8220, 8240, 8250, 8260, 85, 88, 8937, 8939, 90, SUPER 90, TO20, TO30, TO35 Massey Harris: MH PACER, MH PONY, MH30, MH50 Perkins: A4.236 (LD), A4.248 (LF), A4.318 (NC), A6.354.4 (TW), AT6.354.4 (TU), T4.236 (LJ) Manufacturer Information OEM fitment includes: Case IH / International Harvester: 402281R1, 121951C1, 1500626C92, 1536473C91, 66-98, 532673R1, 532029R1 John Deere: RE43593 Landini: 1500626C92, 180224M92, 180224M91 Massey Ferguson: 188462M91, 184528M91, 180224M92, 180224M91, 180224M1
$13.00 $12.00
Sparex PTO Shaft - S.260168
PTO Shaft - S.260168 Enhance the performance of your agricultural machinery with the high-quality PTO Shaft designed for optimal efficiency. This PTO shaft features a maximum RPM of 1000 and is equipped with 21 splines. With a length of 157.5mm, it is specifically engineered to meet the demands of various farming applications. Product Specifications Brand: Spenco Max. RPM: 1000 Length: 157.5mm Splines: 21 Tariff Code: 8483102990 Compatible Models This PTO shaft is suitable for a range of Massey Ferguson models, including: 6485 6490 6495 6497 6499 7619 DYNA 6 7620 DYNA 6 7622 DYNA 6 7624 DYNA 6 7626 DYNA 6 8210 8220 8240 8250 8270 8280 OEM Fitment Information This PTO shaft is compatible with the following OEM part numbers from Massey Ferguson: 3716074M2 3716074H2
$459.00 $413.00
Sparex PTO Shaft - S.260164
PTO Shaft - S.260164 Enhance the performance of your agricultural machinery with the high-quality PTO Shaft designed for optimal efficiency. This PTO shaft features a maximum RPM of 540, ensuring reliable power transfer for your equipment. Product Specifications Brand: Spenco Max. RPM: 540 Length: 117.5mm Diameter: 1 3/8'' Splines: 6 Tariff Code: 8483102990 Compatibility Information This PTO shaft is compatible with a range of Massey Ferguson models, including: 6485 6490 6495 6497 6499 7619 DYNA 6 7620 DYNA 6 7622 DYNA 6 7624 DYNA 6 7626 DYNA 6 8210 8220 8240 8250 8260 8270 8280 Manufacturer Information Part numbers for OEM fitment include: ACW1655680 3716018H2 3716018M2 Upgrade your machinery with the reliable and efficient PTO Shaft - S.260164 from Sparex, ensuring your equipment operates at peak performance.
$368.00 $331.00
Sparex PTO Shaft - S.260165
PTO Shaft - S.260165 Enhance the performance of your agricultural machinery with the high-quality PTO Shaft designed for optimal efficiency. This PTO Shaft features a maximum RPM of 1000, ensuring reliable operation for your farming needs. With a length of 117.5mm and 21 splines, it is engineered for durability and precision. Product Specifications Brand: Spenco Max. RPM: 1000 Length: 117.5mm Splines: 21 Tariff Code: 8483102990 Compatible Models This PTO Shaft is suitable for a range of Massey Ferguson models, including: 6485 6490 6495 6497 6499 7619 DYNA 6 7620 DYNA 6 7622 DYNA 6 7624 DYNA 6 7626 DYNA 6 8210 8220 8240 8250 8260 8270 8280 OEM Fitment Information This PTO Shaft is compatible with the following OEM part numbers: 3716016M2 3716016H2
$784.00 $706.00
Sparex PTO Shaft - S.260166
PTO Shaft - S.260166 Enhance the performance of your agricultural machinery with the high-quality PTO Shaft - S.260166. Designed for durability and efficiency, this PTO shaft is engineered to handle a maximum RPM of 1000 and features 20 splines for optimal power transfer. Product Specifications Brand: Spenco Max. RPM: 1000 Length: 157.5mm Splines: 20 Tariff Code: 8483102990 Compatibility Information This PTO shaft is suitable for the following Massey Ferguson models: 6485 6490 6495 6497 6499 8210 8220 8240 8250 8260 OEM Fitment Information This product is designed to fit the following OEM part numbers: Massey Ferguson 3716073H2 Massey Ferguson 3716073M2 Upgrade your machinery with the reliable and efficient PTO Shaft - S.260166, ensuring optimal performance and longevity in your farming operations.
$322.00 $290.00
Sparex Piston Ring | Sparex Part No.S.110975
Piston Ring | Sparex Part No. S.110975 Enhance the performance of your engine with the Piston Ring designed specifically for a range of Sisu engines, including the 320D, DS, 320DE, 320DSRE, 420D, DS, 420DSRE, 420DW, 420DSI, 420DWRE, 420DWRIE, 620D, 620DS, 620DWR, and 620DWRE. Product Specifications Brand: Sparex Number of Rings: 3 Related Products: 110969 Ring Type: Top Ring: CK1 - Chrome Plated Keystone (2.80mm) 2nd Ring: P5 - Parallel Faced Plain (2.45mm) 3rd Ring: CBEH - Chrome Plated Bevelled Edge with Helical Coil Spring (4.00mm) Tariff Code: 8409990090 Compatibility Information This piston ring is compatible with various models from leading manufacturers: Case IH / International Harvester: CS100, CS105 PRO, CS110, CS120, CS130, CS150, CS85 PRO, CS94, CS95 PRO, CVX1155, CVX1170, CVX1190, CVX1195, CVX140, CVX150, CVX160, CVX170, CVX175, CVX195 Challenger: 647, 647 COMBINE, 648, 648 COMBINE, MT315B, MT325B, MT335B, MT345B, MT555B, MT565B, MT575B, MT585B, MT595B, MT645B Fendt: 5270 C, 6270 L Ford / New Holland: T7510, T7520, T7530, T7540, T7550, TVT155, TVT170, TVT190, TVT195 Massey Ferguson: 3615, 3625, 3635, 3645, 3655, 3670, 3690, 4435, 4445, 4455, 5465, 5470, 5475, 5480, 6460, 6465, 6470, 6475, 6480, 6485, 6490, 6495, 6497, 6499, 7250, 7252, 7254, 7256, 7260, 7465, 7475, 7480, 7485, 7485 DYNA VT/DYNA STEP, 7490, 7495, 7497, 7499, 8140, 8150, 8160, 8240, 8250, 8260, 8450, 8460 Sisu Diesel: 320DE, 320DS, 320DSRE, 420D, 420DS, 420DSI, 420DSRE, 420DW, 420DWRE, 420DWRIE, 620D, 620DS, 620DWR, 620DWRE Steyr: 6150CVT, 6155CVT, 6160CVT, 6170CVT, 6195CVT, 9085MT, 9095MT, 9105, 9105MT, 9115, 9125, 9145, CVT 150, CVT 170 Valmet & Valtra: 255, 355, 365, 455, 465, 555, 565, 600, 6000, 6100, 6250, 6250 HITECH, 6300, 6350, 6350 HITECH, 6400, 6550, 6550 HITECH, 6600, 665, 6650, 6650 HITECH, 6800, 6850, 6850 HITECH, 700, 800, 8000, 8050, 8100, 8150, 8350, 8350 HITECH, 8400, 8450, 8450 HITECH, 865, 8950 HITECH, 900 Manufacturer Information This product is compatible with OEM part numbers from various manufacturers: Case IH / International Harvester: 47106016, 162000030701 Challenger: 836640078 Fendt: 836640078 Ford / New Holland: 162000030701 Massey Ferguson: 836640078 Steyr: 47106016, 162000030701 Valmet & Valtra: 836640078
$73.00 $66.00
Sparex Piston Liner (Finished) | Sparex Part No.S.67368
Piston Liner (Finished) | Sparex Part No. S.67368 Enhance the performance of your engine with the high-quality Piston Liner from Sparex, designed specifically for a range of Sisu engines including the 320D, DS, 320DE, 320DSRE, 420D, DS, 420DSRE, 420DW, 420DSI, 420DWRE, 620D, 620DS, 620DWR, 620DWRE, 634D, 634DS, 634DSRE, and 634DSBE. Product Specifications Bore Diameter: 108 mm Brand: Sparex Finish: Finished Liner Type: Wet Outside Diameter: 123 mm Tariff Code: 8409990090 Wet or Dry: Wet Compatibility Information This Piston Liner is compatible with various models across multiple brands: Case IH / International Harvester: CS100, CS110, CS120, CS130, CS150, CS68, CS75, CS78, CS86, CS94, CVX1135, CVX1145, CVX1155, CVX1170, CVX1190, CVX120, CVX130, CVX150, CVX170 Challenger: 648, 648 COMBINE, MT315B, MT325B, MT335B, MT345B, MT555B, MT565B, MT575B, MT585B, MT595B, MT645B Fendt: 5270 C, 6270 L Ford / New Holland: TVT135, TVT145, TVT155, TVT170, TVT190 Massey Ferguson: 3615, 3625, 3635, 3645, 3670, 3690, 4435, 4445, 4455, 5470, 5480, 6460, 6470, 6485, 6490, 6495, 6497, 6499, 7250, 7252, 7254, 7256, 7260, 7485, 7485 DYNA VT/DYNA STEP, 7490, 7495, 8140, 8150, 8160, 8240, 8250, 8260, 8450, 8460 Sisu Diesel: 320D, 320DE, 320DS, 320DSRE, 420D, 420DS, 420DSI, 420DSRE, 420DW, 420DWRE, 420DWRIE, 620D, 620DS, 620DWR, 620DWRE, 634D, 634DS, 634DSBE, 634DSRE Steyr: 6145CVT, 6155CVT, 6170CVT, 667, 680, 9080M, 9080MT, 9085MT, 9090M, 9090MT, 9095MT, 9100M, 9100MT, 9105, 9105MT, 9115, 9125, 9145, CVT 120, CVT 130, CVT 150, CVT 170, M9078, M9086, M9094, M968, M975 Valmet & Valtra: 255, 355, 365, 455, 465, 555, 565, 600, 6000, 6100, 6250, 6250 HITECH, 6300, 6350, 6350 HITECH, 6400, 6550, 6550 HITECH, 6600, 665, 6650, 6650 HITECH, 6800, 6850, 6850 HITECH, 700, 800, 8000, 8050, 8100, 8150, 8200, 8350, 8350 HITECH, 8400, 8450, 8450 HITECH, 8550, 8550 HITECH, 865, 8750, 8950, 8950 HITECH, 900 Manufacturer Information This Piston Liner is designed to meet OEM specifications and is compatible with the following part numbers: Case IH / International Harvester: 162000040704, 162000040783 Challenger: 3638970M1, 836647420, V836673191, V836666990 Fendt: 3638970M1, 836647420, V836666990, V836673191 Ford / New Holland: 162000040783, 162000040704 Massey Ferguson: V836666990, V836673191, 3638970M1, 836647420 Steyr: 162000040704, 162000040783 Valmet & Valtra: 836647420, V836666990, V836673191, 3638970M1
$145.00 $131.00
Sparex Pear Linch Pin, Pin Ø12mm x 52mm | Sparex Part No.S.33013
Product Title: Pear Linch Pin, Pin Ø12mm x 52mm | Sparex Part No. S.33013 This high-quality Pear Linch Pin is designed to fit lower link quick release cones, ensuring a secure and reliable connection for your agricultural machinery. Manufactured by Sparex, this standard-duty pin is an essential component for various models, providing durability and performance you can trust. Product Specifications Alternative to: 23013 Pin Diameter (Ø): 12 mm Usable Length: 47 mm Total Length: 52 mm Brand: Sparex Category: 2 Duty: Standard Type: Pear Tariff Code: 7318290090 Related Products: 32991, 32992, 33000, 33001, 33033, 933000, 933001, 933002, 148195, 148198 Compatibility Information This Pear Linch Pin is suitable for a wide range of Massey Ferguson models, including: 2620, 2625, 2640, 2680, 2720, 2725 3050, 3060, 3065, 3070, 3075, 3080, 3085 3090, 3095, 3115, 3120, 3125, 3610, 3630 3635, 3645, 3650, 3655, 3670, 3680, 3690 4225, 4235, 4245, 4255, 4260, 4265, 4270 4325, 4335, 4345, 4355, 4360, 4365, 4370 5425, 5435, 5445, 5455, 5460, 6120, 6130 6140, 6150, 6160, 6170, 6180, 6190, 6235 6245, 6255, 6260, 6270, 6280, 6290, 6445 6455, 6460, 6465, 6470, 6475, 6480, 6485 6490, 6495, 6497, 6499, 7465, 7475, 7480 7485, 7485 DYNA VT/DYNA STEP, 7490, 7495 8110, 8120, 8130, 8140, 8150, 8160, 8170 8180, 8210, 8220, 8240, 8250, 8260, 8270 8280, 8450, 8460, 8470, 8480 Additionally, it is compatible with White Oliver models and various Landini models. Manufacturer Information This product is manufactured by Sparex and is designed to meet OEM specifications for: Landini: F28187006205, 3102086M91 Massey Ferguson: 3102086M91, F281870062052 White Oliver: 305855 Ensure your machinery operates at its best with the reliable and durable Pear Linch Pin from Sparex.
$7.00 $6.00
Sparex Outer Door Handle RH & LH | Sparex Part No.S.20913
Outer Door Handle RH & LH | Sparex Part No. S.20913 Upgrade your machinery with the high-quality Outer Door Handle designed for both left-hand (LH) and right-hand (RH) fittings. Manufactured by Sparex, this durable handle ensures reliable performance and a perfect fit for your Massey Ferguson equipment. Product Specifications Brand: Sparex Fitting: RH & LH Tariff Code: 8302300090 Compatibility Information This handle is suitable for a wide range of Massey Ferguson models, including: 5365 BRAZILIAN 5425 5435 5445 5455 5460 5465 6110 6120 6130 6140 6150 6160 6170 6180 6190 6235 6245 6255 6260 6265 6270 6280 6290 6445 6455 6460 6465 6470 6475 6480 6485 6490 6495 6497 6499 660 BRAZILIAN 680 BRAZILIAN 7465 7475 7480 7485 7485 DYNA VT/DYNA STEP 7490 7495 8110 8130 8140 8150 8160 8170 8180 8210 8220 8240 8250 8260 8270 8280 8450 8460 8470 8480 Manufacturer Information Part Number: 3902356M91 from Massey Ferguson
$225.00 $203.00
Sparex O Ring 2.5 x 35mm 70 Shore | Sparex Part No.S.43004
O Ring 2.5 x 35mm 70 Shore | Sparex Part No. S.43004 Introducing the high-quality O'Ring - 2.5 x 35mm, crafted from durable Nitrile Rubber with a shore hardness of 70°. This versatile O-ring is designed for general use, providing reliable sealing performance in a wide temperature range of -40°C to +135°C. Product Specifications Actual I.D. (ins): 1.378 Actual I.D. (mm): 35 Actual Section (ins): 0.098 Actual Section (mm): 2.5 Brand: Sparex Material: Nitrile Rubber Series: German Series Shore Hardness: 70 Tariff Code: 4016930090 Temperature Range: -40°C to +135°C Compatibility Information This O-ring is suitable for a variety of Massey Ferguson models, including: 275, 290, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 3115, 3120, 3125, 3140, 340, 350, 355, 360, 3610, 362, 3630, 3635, 3645, 365, 3650, 3655, 3670, 3680, 3690, 375, 375E BRAZILIAN, 390, 390E BRAZILIAN, 390T, 396, 398, 399, 4215, 4220, 4225, 4235, 4245, 4255, 4260, 4265, 4270, 4315, 4325, 4335, 4345, 4355, 4360, 4365, 4370, 6110, 6120, 6140, 6150, 6160, 6170, 6180, 6190, 6235, 6245, 6255, 6260, 6265, 6290, 8110, 8120, 8130, 8140, 8150, 8160, 8210, 8220, 8240, 8250, 8260. Manufacturer Information Part Number: Massey Ferguson 366434X1
$1.00
Sparex O Ring 1/8'' x 2 3/8'' (BS837) 70 Shore | Sparex Part No.S.10398
O-Ring 1/8'' x 2 3/8'' (BS837) 70 Shore | Sparex Part No. S.10398 Discover the reliability and durability of our O-Ring, measuring 1/8'' x 2 3/8''. Crafted from high-quality Nitrile Rubber with a shore hardness of 70°, this O-Ring is designed for general use in a wide temperature range of -40°C to +135°C, making it suitable for various applications. Product Specifications Actual I.D. (inches): 2.375 Actual I.D. (mm): 60.32 Brand: Sparex BS No.: 837 Material: Nitrile Rubber Nominal I.D. (inches): 2 3/8 Nominal I.D. (mm): 60 Nominal Section (inches): 1/8 Related Products: 11515 Shore Hardness: 70 Tariff Code: 4016930090 Temperature Range: -40°C to +135°C Suitable For This O-Ring is compatible with a wide range of Massey Ferguson models, including: 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 3115, 3120, 3125, 3140, 350, 355, 360, 3610, 362, 3630, 3635, 3645, 365, 3650, 3655, 3670, 3680, 3690, 375, 390, 390T, 396, 398, 399, 4225, 4235, 4245, 4255, 4260, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4365, 4370, 6110, 6120, 6130, 6140, 6150, 6160, 6170, 6180, 6190, 6235, 6245, 6255, 6260, 6265, 6270, 6280, 6290, 8110, 8120, 8130, 8140, 8150, 8160, 8210, 8220, 8240, 8250, 8260. Manufacturer Information Part Number: Massey Ferguson 3019927x1
$1.00
JMCE *SPECIAL PRICE* - AGCO | Hexagonal Head Bolt - 391269X1
Fits Fendt Models 5180E, 8380P, 8410P, 9490X, Slicer Mower combinations middle attachment, Twister 3PT Linkage Fits Massey Ferguson Models MF 154S 2WD, MF 185 4WD, MF 174S, MF 154V 2WD, MF 164V, MF 174V 2WD, MF 254S 4WD, MF 294 4WD, MF 264, MF 264S 2WD, MF 264S 4WD, MF 3435, MF 3445, MF 3455, MF 394F 2WD, MF 394F 4WD, MF 364S 2WD, MF 364S 4WD, MF 374S 2WD, MF 374S 4WD, MF 384S 2WD, MF 384S 4WD, MF 394S 2WD, MF 394S 4WD, MF 354V 2WD, MF 354V 4WD, MF 364V 2WD, MF 364V 4WD, MF 374V 2WD, MF 374V 4WD, MF 3435C, MF 3445C, MF 3455C, MF 3050 2WD, MF 3050 4WD, MF 3060 2WD, MF 3060 4WD, MF 3070 2WD, MF 3070 4WD, MF 3080 2WD, MF 3080 4WD, MF 3090 2WD, MF 3090 4WD, MF 3095 2WD, MF 3095 4WD, MF 3115 2WD, MF 3115 4WD, MF 3125 2WD, MF 3125 4WD, MF 3065 2WD, MF 3065 4WD, MF 3085 2WD, MF 3085 4WD, MF 3120 2WD, MF 3120 4WD, MF 3075 2WD, MF 3075 4WD, MF 3610 2WD, MF 3610 4WD, MF 3630 2WD, MF 3630 4WD, MF 3650 2WD, MF 3650 4WD, MF 3680 2WD, MF 3680 4WD, MF 3645 2WD, MF 3645 4WD, MF 3655 2WD, MF 3655 4WD, MF 3670 2WD, MF 3670 4WD, MF 3690 2WD, MF 3690 4WD, MF 3635 2WD, MF 3635 4WD, MF 294 2WD, MF 284S 2WD, MF 284S 4WD, MF 263, MF 353 2WD, MF 353 4WD, MF 363 2WD, MF 363 4WD, MF 373 2WD, MF 373 4WD, MF 383 2WD, MF 383 4WD, MF 393 2WD, MF 393 4WD, MF 353S 2WD, MF 353S 4WD, MF 363S 4WD, MF 373S 2WD, MF 373S 4WD, MF 377 2WD, MF 377 4WD, MF 387 2WD, MF 387 4WD, MF 397 2WD, MF 397 4WD, MF 1114 2WD, MF 1114 4WD, MF 1134 4WD, MF 1014 2WD, MF 1014 4WD, MF 6110 2WD, MF 6110 4WD, MF 6120 2WD, MF 6120 4WD, MF 6130 2WD, MF 6130 4WD, MF 6140 2WD, MF 6140 4WD, MF 6150 2WD, MF 6150 4WD, MF 6160 2WD, MF 6160 4WD, MF 6170 2WD, MF 6170 4WD, MF 6180 2WD, MF 6180 4WD, MF 6190 2WD, MF 6190 4WD, MF 8170 4WD, MF 8140 2WD, MF 8140 4WD, MF 8150 2WD, MF 8150 4WD, MF 8160 2WD, MF 8160 4WD, MF 6290 2WD, MF 6290 4WD, MF 6280 2WD, MF 6280 4WD, MF 6270 2WD, MF 6270 4WD, MF 6265 2WD, MF 6265 4WD, MF 6260 2WD, MF 6260 4WD, MF 6255 2WD, MF 6255 4WD, MF 6245 2WD, MF 6245 4WD, MF 6235 2WD, MF 6235 4WD, MF 8250 4WD, MF 8280 4WD, MF 8270 4WD, MF 8260 2WD, MF 8240 2WD, MF 8240 4WD, MF 8220 2WD, MF 8220 4WD, MF 8210 2WD, MF 8210 4WD, MF 6497, MF 6499, MF 6465, MF 6475, MF 6480, MF 6490, MF 6495, MF 6485, MF 64 Fits Valtra Models S232, S262, S292, S322, S352, No longer used Refer to 11652, No longer used Refer to 11647, No longer used Refer to 11648, No longer used Refer to 11649, No longer used Refer to 11650, No longer used Refer to 11651, T195 (replaced by J3591), T210 (replaced by J3592), T230 (replaced by J3593), T250 (replaced by J3594), A74SH, A84SH, A94SH, A104MH, A114MH, A124LH, A134LH, A104MH4, A114MH4, N101, S233, S263, S293, S323, S353, S294, S374, S324 SmartTouch MR19, S394 SmartTouch MR19
$5.00 $3.00
You have seen 48 out of 742 products