Bucket Edges & Teeth
Sparex Bucket Tooth, Centre Tooth, Replacement for: JCB. - S.127946
Fasteners: S.78329.Product Specifications Alternative to: 78328 Brand: Sparex Fasteners: S.78329 Fitting: Centre Tooth Hole spacing (mm): 45 Hole Ø (mm): 18 Length (mm): 258 Primary OE Reference: 332C4388 Related products: 78329 Tariff Code: 8426990000 Width (mm): 54 Suitable For Infomation JCB 3CX, 4CXManufacture Information JCB 332C4388
£13.73£12.36
Sparex Bucket Tooth, LH Tooth, Replacement for: JCB. - S.127948
Fasteners: S.78329.Product Specifications Alternative to: 78327 Brand: Sparex Fasteners: S.78329 Fitting: LH Fitting: LH Tooth Primary OE Reference: 332C4390 Related products: 78329 Tariff Code: 8431492000 Suitable For Infomation JCB 3CX, 4CXManufacture Information JCB 332C4390
£25.30£22.77
Sparex Bucket Tooth, Centre Tooth, Replacement for: Fermec, Massey Ferguson. To fit as: 1462201M1 - S.59753
Fasteners: S.78741. Brand: Sparex Fasteners: S.78741 Fitting: Centre Tooth Primary OE Reference: 1462201M1 Related products: 78741 Tariff Code: 8432900000
£25.99£23.39
Sparex Weld On Bucket Edge (Single Bevel) Hardness: 250-300Hb. - S.77082
Length: (A) 2000mm, Width: (B) 100mm, Thickness: (C) 12mm. Brand: Sparex Hardness (Hb): 250-300 Length (mm): 2000 Notes: Procedure for welding your bucket strip. Please apply a 30 degree chamfer to the edge of the bucket strip and bucket wide enough to facilitate a good weld.: Remove all residue from surfaces to be welded. Correctly assemble and clamp the bucket strip to the bucket.: Types of electrodes to be used: Pre-heat to 300 degrees Celsius use electrode AWS-E7018: Pre-heat to 100 degrees Celsius use electrode AWS-E110-18G No pre-heat use electrode AWS-E307 or AWS-E312: Tack weld the bucket strip to the bucket in several positions before applying fillet weld. Please allow weld to cool naturally if possible - rapid cooling by the application of water for example, could cause thermal shock within the material leading to the weld and or bucket strip to crack.: Please observe all health and safety rules and laws when carrying out this procedure. Profile: Single Bevel Tariff Code:8426990000 Thickness (mm): 12 Width (mm): 100
£192.64£173.37
Sparex Weld On Bucket Edge (Single Bevel) Hardness: 250-300Hb. - S.77086
Length: (A) 2800mm, Width: (B) 100mm, Thickness: (C) 12mm. Brand: Sparex Hardness (Hb): 250-300 Length (mm): 2800 Notes: Procedure for welding your bucket strip. Please apply a 30 degree chamfer to the edge of the bucket strip and bucket wide enough to facilitate a good weld.: Remove all residue from surfaces to be welded. Correctly assemble and clamp the bucket strip to the bucket.: Types of electrodes to be used: Pre-heat to 300 degrees Celsius use electrode AWS-E7018: Pre-heat to 100 degrees Celsius use electrode AWS-E110-18G No pre-heat use electrode AWS-E307 or AWS-E312: Tack weld the bucket strip to the bucket in several positions before applying fillet weld. Please allow weld to cool naturally if possible - rapid cooling by the application of water for example, could cause thermal shock within the material leading to the weld and or bucket strip to crack.: Please observe all health and safety rules and laws when carrying out this procedure. Profile: Single Bevel Tariff Code:8426990000 Thickness (mm): 12 Width (mm): 100
£242.17£217.95
Sparex Weld On Bucket Edge (Single Bevel) Hardness: 250-300Hb. - S.77087
Length: (A) 2500mm, Width: (B) 150mm, Thickness: (C) 20mm. Brand: Sparex Hardness (Hb): 250-300 Length (mm): 2500 Notes: Procedure for welding your bucket strip. Please apply a 30 degree chamfer to the edge of the bucket strip and bucket wide enough to facilitate a good weld.: Remove all residue from surfaces to be welded. Correctly assemble and clamp the bucket strip to the bucket.: Types of electrodes to be used: Pre-heat to 300 degrees Celsius use electrode AWS-E7018: Pre-heat to 100 degrees Celsius use electrode AWS-E110-18G No pre-heat use electrode AWS-E307 or AWS-E312: Tack weld the bucket strip to the bucket in several positions before applying fillet weld. Please allow weld to cool naturally if possible - rapid cooling by the application of water for example, could cause thermal shock within the material leading to the weld and or bucket strip to crack.: Please observe all health and safety rules and laws when carrying out this procedure. Profile: Single Bevel Tariff Code:8426990000 Thickness (mm): 20 Width (mm): 150
£374.28£336.85
Sparex Bucket Tooth, RH Tooth, Replacement for: JCB. To fit as: 53103208 - S.78326
Fasteners: S.78329. Alternative to: 127947 Brand: Sparex Fitting: RH Fitting: RH Tooth Primary OE Reference: 53103208 Related products: 78327,78328,78329 Tariff Code:8426990000
£26.57£23.91
Sparex Bucket Tooth, LH Tooth, Replacement for: JCB. To fit as: 53103209 - S.78327
Fasteners: S.78329. Alternative to: 127948 Brand: Sparex Fitting: LH Fitting: LH Tooth Primary OE Reference: 53103209 Related products: 78326,78328,78329 Tariff Code:8426990000
£24.53£22.08
Sparex Bucket Tooth, Centre Tooth, Replacement for: JCB. To fit as: 53103205 - S.78328
Fasteners: S.78329. Alternative to: 127946 Brand: Sparex Fasteners: S.78329 Fitting: Centre Tooth Hole Ø (mm): 21 Primary OE Reference: 53103205 Related products: 78326,78327,78329 Tariff Code:8426990000
£13.73£12.36
Sparex Weld On Bucket Edge (Single Bevel) Hardness: 400-500Hb. - S.79261
Length: (A) 2500mm, Width: (B) 150mm, Thickness: (C) 16mm. Brand: Sparex Hardness (Hb): 400-500 Length (mm): 2500 Notes: Procedure for welding your bucket strip. Please apply a 30 degree chamfer to the edge of the bucket strip and bucket wide enough to facilitate a good weld.: Remove all residue from surfaces to be welded. Correctly assemble and clamp the bucket strip to the bucket.: Types of electrodes to be used: Pre-heat to 300 degrees Celsius use electrode AWS-E7018: Pre-heat to 100 degrees Celsius use electrode AWS-E110-18G No pre-heat use electrode AWS-E307 or AWS-E312: Tack weld the bucket strip to the bucket in several positions before applying fillet weld. Please allow weld to cool naturally if possible - rapid cooling by the application of water for example, could cause thermal shock within the material leading to the weld and or bucket strip to crack.: Please observe all health and safety rules and laws when carrying out this procedure. Profile: Single Bevel Tariff Code:8426990000 Thickness (mm): 16 Width (mm): 150
£385.28£346.76
Sparex Weld On Bucket Edge (Single Bevel) Hardness: 400-500Hb. - S.79262
Length: (A) 3000mm, Width: (B) 150mm, Thickness: (C) 16mm. Brand: Sparex Hardness (Hb): 400-500 Length (mm): 3000 Notes: Procedure for welding your bucket strip. Please apply a 30 degree chamfer to the edge of the bucket strip and bucket wide enough to facilitate a good weld.: Remove all residue from surfaces to be welded. Correctly assemble and clamp the bucket strip to the bucket.: Types of electrodes to be used: Pre-heat to 300 degrees Celsius use electrode AWS-E7018: Pre-heat to 100 degrees Celsius use electrode AWS-E110-18G No pre-heat use electrode AWS-E307 or AWS-E312: Tack weld the bucket strip to the bucket in several positions before applying fillet weld. Please allow weld to cool naturally if possible - rapid cooling by the application of water for example, could cause thermal shock within the material leading to the weld and or bucket strip to crack.: Please observe all health and safety rules and laws when carrying out this procedure. Profile: Single Bevel Tariff Code:8426990000 Thickness (mm): 20 Width (mm): 200
£409.98£368.98
Sparex Weld On Bucket Edge (Single Bevel) Hardness: 400-500Hb. - S.79268
Length: (A) 2500mm, Width: (B) 200mm, Thickness: (C) 20mm. Brand: Sparex Hardness (Hb): 400-500 Length (mm): 2500 Notes: Procedure for welding your bucket strip. Please apply a 30 degree chamfer to the edge of the bucket strip and bucket wide enough to facilitate a good weld.: Remove all residue from surfaces to be welded. Correctly assemble and clamp the bucket strip to the bucket.: Types of electrodes to be used: Pre-heat to 300 degrees Celsius use electrode AWS-E7018: Pre-heat to 100 degrees Celsius use electrode AWS-E110-18G No pre-heat use electrode AWS-E307 or AWS-E312: Tack weld the bucket strip to the bucket in several positions before applying fillet weld. Please allow weld to cool naturally if possible - rapid cooling by the application of water for example, could cause thermal shock within the material leading to the weld and or bucket strip to crack.: Please observe all health and safety rules and laws when carrying out this procedure. Profile: Single Bevel Tariff Code:8426990000 Thickness (mm): 20 Width (mm): 200
£577.00£519.30
Sparex Weld On Bucket Edge (Single Bevel) Hardness: 400-500Hb. - S.79269
Length: (A) 3000mm, Width: (B) 200mm, Thickness: (C) 20mm. Brand: Sparex Hardness (Hb): 400-500 Length (mm): 3000 Notes: Procedure for welding your bucket strip. Please apply a 30 degree chamfer to the edge of the bucket strip and bucket wide enough to facilitate a good weld.: Remove all residue from surfaces to be welded. Correctly assemble and clamp the bucket strip to the bucket.: Types of electrodes to be used: Pre-heat to 300 degrees Celsius use electrode AWS-E7018: Pre-heat to 100 degrees Celsius use electrode AWS-E110-18G No pre-heat use electrode AWS-E307 or AWS-E312: Tack weld the bucket strip to the bucket in several positions before applying fillet weld. Please allow weld to cool naturally if possible - rapid cooling by the application of water for example, could cause thermal shock within the material leading to the weld and or bucket strip to crack.: Please observe all health and safety rules and laws when carrying out this procedure. Profile: Single Bevel Tariff Code:8426990000 Thickness (mm): 20 Width (mm): 200
£693.41£624.07
Sparex Bucket Tooth, RH Tooth, Replacement for: JCB. - S.127947
Fasteners: S.78329.Product Specifications Alternative to: 78326 Brand: Sparex Fasteners: S.78329 Fitting: RH Fitting: RH Tooth Primary OE Reference: 332C4389 Related products: 78329 Tariff Code: 8426990000 Suitable For Infomation JCB 3CX, 4CXManufacture Information JCB 332C4389
£25.30£22.77
Sparex Weld On Bucket Edge (Single Bevel) Hardness: Hardox 500Hb. - S.130836
Product Specifications Suitable For Infomation Manufacture Information
£427.67£384.90
Sparex Weld On Bucket Edge (Single Bevel) Hardness: 250-300Hb. - S.78997
Length: (A) 2438mm, Width: (B) 200mm, Thickness: (C) 25mm. Brand: Sparex Hardness (Hb): 250-300 Length (mm): 2438 Notes: Procedure for welding your bucket strip. Please apply a 30 degree chamfer to the edge of the bucket strip and bucket wide enough to facilitate a good weld.: Remove all residue from surfaces to be welded. Correctly assemble and clamp the bucket strip to the bucket.: Types of electrodes to be used: Pre-heat to 300 degrees Celsius use electrode AWS-E7018: Pre-heat to 100 degrees Celsius use electrode AWS-E110-18G No pre-heat use electrode AWS-E307 or AWS-E312: Tack weld the bucket strip to the bucket in several positions before applying fillet weld. Please allow weld to cool naturally if possible - rapid cooling by the application of water for example, could cause thermal shock within the material leading to the weld and or bucket strip to crack.: Please observe all health and safety rules and laws when carrying out this procedure. Profile: Single Bevel Tariff Code:8426990000 Thickness (mm): 25 Width (mm): 200
£622.56£560.30