Vicon
Sparex Pear Linch Pin - S.8460
Pin Ø11mm x 70mm (4 pcs. Agripak) Alternative to: 8461 A Ø (ins): 7/16 A Ø (mm): 11 B (mm): 60 Brand: Sparex C (mm): 70 Duty: Standard Pin Ø (ins): 7/16 Pin Ø (mm): 11 Tariff Code:7318290090 Total length (mm): 70 Type: Pear Useable length (mm): 60
£1.08£0.97
Sparex PTO Ratchet Clutch - 3 Row (U/J Size: 23.8 x 61.2mm) Size: 1 3/8''-6 Spline - S.6034
Torque (Nm) Setting: 900, Italian Series: AB2/A2, German Series: AW20/W2200. Brand: Weasler Clutch Setting Nm: 900 German Reference: 55.198.03 German Series: AW20/W2200 Italian New Reference: 611341501 RItalian Series: AB2/A2 PTO Series: AB2/A2, AW20/W2200 Reference: 570-8206-03 Related products: 72447, 118070, 55018 Size (ins): 1 3/8 Splines: 6 Tariff Code: 8483908990 Torque (ins-lbs): 7965 Torque (Nm): 900 Tractor PTO Rotation: Clockwise Type: 3 Row Universal Joint Dimensions: 23.8 x 61.2mm
£429.32£386.39
Sparex (10 Pcs) - Mower Blade Retainer- M12x36mm - Replacement for Vicon - S.105994
Head Ø: 31mm, Collar Diameter:18mm, Thread length: 18mmProduct Specifications Brand: Sparex Collar Diameter mm: 18 Collar Length mm: 5 Head Ø (mm): 31 Length (mm): 36 Primary OE Reference: B1374593 Related products: 77121, 77122 Tariff Code:7318190090 Thread length (mm): 18 Thread size: M12 Thread type: Metric Suitable For Infomation Vicon VARIOUSManufacture Information Vicon 1266078, B1374593
£0.97£0.87
Sparex Sparex Deep Groove Ball Bearing (62052RS) - S.18087
ID: 25mm OD: 52mm Width: 15mmProduct Specifications Alternative to: 27230, 51586, 129631 B (mm): 15 Bearing Reference: 62052RS Bearing type: Deep Groove Brand: Sparex d (mm): 25 D (mm): 52 Inner Ø (mm): 25 Metric or Imperial: Metric Outer Ø (mm): 52 Seal Type: 2RS Tariff Code: 8482200000 Width (mm): 15 Suitable For Infomation Allis Chalmers 5040, 5045, 5050, 6060, 6070 Massey Ferguson 5425, 5435, 5445, 5455, 5460, 6170, 6180, 6190, 6235, 6245, 6255, 6260, 6265, 6270, 6280, 6290, 6445, 6455, 6460, 6470 Vicon VARIOUS Yanmar 1300, 135, 140, 147, 1500, 155, 1600, 165, 169, 1700, 180, 186, 187, 1900, 195, 2000, 240 Zetor 10111, 10145, 12111, 12145, 16045, 16145, 8111, 8145, CRYSTAL 10145, CRYSTAL 12111, CRYSTAL 12145, CRYSTAL 16045, CRYSTAL 8111, CRYSTAL 8145Manufacture Information Allis Chalmers 72091053, 74253862 Bearings Reference 62052RS, 6205 JCB 916/0600 John Deere AZ20217, JD30198 Landini 22258X, 339581X1 Massey Ferguson 339581X1 Zetor 971092
£5.56£5.00
Sparex Sparex Deep Groove Ball Bearing (62072RS) - S.18089
ID: 35mm OD: 72mm Width: 17mmProduct Specifications Alternative to: 18073, 27232, 129635 B (mm): 17 Bearing Reference: 62072RS Bearing type: Deep Groove Brand: Sparex d (mm): 35 D (mm): 72 Inner Ø (mm): 35 Metric or Imperial: Metric Outer Ø (mm): 72 Related products: 41755, 50328 Seal Type: 2RS Tariff Code: 8482200000 Width (mm): 17 Suitable For Infomation Ford / New Holland 4600, 4610 Maschio VARIOUS Vicon VARIOUS Yanmar VARIOUSManufacture Information Allis Chalmers 70256151V Bearings Reference 62072RS, 6207 Carraro CAR26016 Case IH / International Harvester K261875, 84330083, ST205A, 63663R91 David Brown K261875 Ford / New Holland 83930323, CAR26016, ST205A, 84330083 Massey Ferguson 339579X1, 833858M5
£10.55£9.49
Sparex Top link pin - Dual category 19 - 25mm Cat.1/2 - S.3539
Pin Ø: 19 - 25mm, Working length 18 - 65mm Overall length: 166mm, Hole Ø: 5mmProduct Specifications A (ins): 6 1/2 A (mm): 166 Alternative to: 164531 Brand: Sparex Category: 1/2 Hole Ø (ins): 7/32 Hole Ø (mm): 5 Overall length (ins): 6 17/32 Overall length (mm): 166 Pin Type: Dual Category Pin Ø (ins): 3/4 - 1 Pin Ø (mm): 19 - 25 Related products: 23387 Tariff Code:7319909000 Working length (ins): 45/64 - 29/16 Working length (mm): 18 - 65 Suitable For Infomation Kuhn S64PLOUGH, SUBSOILER Vicon DOUBLETMOWERCONDITIO, VARISPREADERManufacture Information This product is not associated with any particular OEM part number
£12.07£10.86
Sparex Top link pin - Dual category 19 - 25mm Cat.1/2 - S.3549
Pin Ø: 19 - 25mm, Working length 18mm Overall length: 166mm, Hole Ø: 5mmProduct Specifications A (ins): 6 1/2 A (mm): 166 Alternative to: 903549 A Ø (ins): 1 A Ø (mm): 25 B (ins): 3 11/32 B (mm): 85 Brand: Sparex B Ø (ins): 3/4 B Ø (mm): 19 C (ins): 23/32 C (mm): 18 Category: 1/2 D (ins): 2 1/8 D (mm): 53 E (ins): 3/16 E (mm): 5 Hole Ø (ins): 13/64 Hole Ø (mm): 5 Overall length (ins): 617/32 Overall length (mm): 166 Pin Type: Dual Category Pin Ø (ins): 3/4 - 1 Pin Ø (mm): 19 - 25 Tariff Code:7319909000 Working length (ins): 23/32 Working length (mm): 18 Suitable For Infomation Vicon VARIOUSManufacture Information Lely 9.1088.0010*6
£13.36£12.02
Sparex Tedder haytine - LH - Length: 410mm, Width: 115mm, Ø9mm - Replacement for PZ, Vicon To fit as: PZ339 - S.38426
Outer Ø (mm): 59mm Brand: Grange & Walter Fitting: LH Length (mm): 410 Outer Ø (mm): 59 Primary OE Reference: PZ339 Quantity in Box: 1 pc. Related products: 38427 Tariff Code:8433900000 Width (mm): 115 Ø (mm): 9
£9.77£8.79
Sparex Tedder haytine - RH - Length: 410mm, Width: 115mm, Ø9mm - Replacement for PZ, Vicon To fit as: PZ340 - S.38427
Outer Ø (mm): 59mm Brand: Grange & Walter Fitting: RH Length (mm): 410 Outer Ø (mm): 59 Primary OE Reference: PZ340 Quantity in Box: 1 pc. Related products: 38426 Tariff Code:8433900000 Width (mm): 115 Ø (mm): 9
£4.16£3.75
Sparex Spout To fit as: 17895466 - S.59700
Suitable for PS02 Variespreader Due to product improvements the spout will sit at a different angle to that of the original but will provide better spreading capabilities. Brand: Sparex Primary OE Reference: 17895466 Related products: 59701, 59702 Tariff Code: 8432900000
£87.44£78.70
Sparex Diffuser Bands To fit as: 17871016 - S.59701
Suitable for PS02 Brand: Sparex Primary OE Reference: 17871016 Related products: 59700 Tariff Code: 8432900000
£10.52£9.47
Sparex Clamp To fit as: 90083262 - S.59702
Suitable for PS02 Brand: Sparex Primary OE Reference: 90083262 Related products: 59700 Supplied with Nuts and Bolts: Supplied with fasteners Tariff Code: 8432900000
£27.73£24.96
Sparex Regulator Bar To fit as: 97870875 - S.59703
Suitable for PS02/03/04 Brand: Sparex Primary OE Reference: 97870875 Tariff Code: 8432900000
£67.93£61.14
Sparex Top Disc - Number of holes 2 To fit as: 79220016 - S.59704
Top Disc - Number of holes 2 To fit as: 79220016 Brand: Sparex Number of holes: 2 Primary OE Reference: 79220016 Related products: 1056, 22782, 59707, 8669 Tariff Code: 8432900000
£63.00£56.70
Sparex Top Cap To fit as: 90070589 - S.59706
Suitable for PS02/03/04 Brand: Sparex Primary OE Reference: 90070589 Tariff Code: 8432900000
£4.85£4.36
Sparex Bottom Disc To fit as: 90015671 - S.59705
Suitable for PS02/03/04 Brand: Sparex Primary OE Reference: 90015671 Tariff Code: 8432900000
£57.19£51.47
Sparex Swivel Bush - Supplied with fasteners To fit as: 900240041 - S.59707
Suitable for PS400/500/600 Brand: Sparex Primary OE Reference: 900240041 Related products: 22782, 22783, 53833, 54285, 59704, 59710, 8638 Supplied with Nuts and Bolts: Supplied with fasteners Tariff Code: 8432900000
£8.21£7.39
Sparex End Cap To fit as: 97871180 - S.59708
Suitable for PS02/03 Brand: Sparex Primary OE Reference: 97871180 Tariff Code: 8432900000
£7.39£6.65
Sparex Bottom Cap To fit as: 90070552 - S.59709
Suitable for PS02/03 Brand: Sparex Primary OE Reference: 90070552 Tariff Code: 8432900000
£5.74£5.16
Sparex Top Disc - Number of holes 4 To fit as: 90020020 - S.59710
Top Disc - Number of holes 4 To fit as: 90020020 Brand: Sparex Number of holes: 4 Primary OE Reference: 90020020 Related products: 1056, 22783, 59707, 8669 Tariff Code: 8432900000
£55.13£49.62
Sparex Sparex PTO Shaft - (Lz) Length: 510mm, 1 3/8'' x 6 Spline Q.R. to Vicon 30mm Pinhole Yoke - S.6773
HP Rating @ 540RPM: 15HP, German Series: AW10/W2100. Brand: Sparex German Series: AW10/W2100 HP Rating @ 540RPM: 15 HP Rating Range @ 540RPM: up to 54 Implement End: Vicon 30mm Pinhole Yoke Kilowatt Power Rating @ 540RPM: 12 Lz Length (mm): 510 PTO Series: AW10/W2100 Tariff Code: 8483908990 Torque (Nm): 335 Torque: 335 - 1240Nm Total Closed Length (mm): 800 Tractor End: 1 3/8'' x 6 Spline Q.R. Tube Profile: Lemon Tube Ref: Ooa/Oa Universal Joint Dimensions: 22 x 54.8mm
£297.91£268.12
Sparex Metric Self Locking Nut, M5x0.80mm (DIN 985) Metric Coarse - S.6815
Metric Self Locking Nut, M5x0.80mm (DIN 985) Metric Coarse Brand: Sparex DIN: Standard No. Finish: Zinc Plated Grade: 8 Metric or Imperial: Metric Nut type: Self Locking Nuts Pitch (mm): 0.80 Size (mm): 5 Tariff Code: 7318166090 Tensile strength: 8.8 Thread type: Metric Coarse
£0.02
Sparex Loader Tine - Cranked 910mm, Thread size: M22 x 1.50 (H - fluted) - S.72556
Fitting: Conus 1 Max. Tine Ø36mm A (mm): 910 B (mm): 131 Brand: SHW Colour: Red Conus Reference: K001 erp_hazardous: No Fitting: Conus 1 HD Bush: S.22829 Maximum Tine Ø (mm): 36 Maximum Torque (Nm): 500 Nut Included: Yes Nut: S.77028 Profile: H - fluted Related products: 21527, 22829, 77028 STD Bush: S.21527 Tariff Code:8426990000 Thread size: M22 x 1.50 Thread type: Metric Tine Length (ins): 35 1/2 Tine Length (mm): 910 Type: Cranked Warning:: Nuts must be retightened according to the instructed torque after 5 hours of operation using a torque-controlled spanner.
£43.87£39.48
Sparex Loader Tine - Cranked 820mm, Thread size: M20 x 1.50 (Square) To fit as: KK221175 - S.77008
Fitting: Conus 1 Max. Tine Ø36mm A (mm): 820 B (mm): 130 Brand: SHW Colour: Red Conus Reference: K004 Fitting: Conus 1 HD Bush: S.1840 Maximum Tine Ø (mm): 36 Maximum Torque (Nm): 450 Nut Included: Yes Nut: S.77027 Primary OE Reference: KK221175 Profile: Square Related products: 14902,1840,77027 STD Bush: S.14902 Tariff Code:8426990000 Thread size: M20 x 1.50 Thread type: Metric Tine Length (ins): 32 Tine Length (mm): 820 Type: Cranked Warning:: Nuts must be retightened according to the instructed torque after 5 hours of operation using a torque-controlled spanner.
£59.12£53.21
Sparex Mower Blade - Stepped Blade - 106 x 47x3mm - Hole Ø21mm - RH & LH - Replacement for PZ, Claas, Krone, Massey Ferguson, Pottinger, Marangon, Kverneland, Taarup, Vicon To fit as: CM120 - S.77052
Qty in Box: 25 pcs. Alternative to: 27638 Brand: Rasspe Fasteners: S.78386, S.78387, S.105826 Fitting: RH & LH Hole Ø (mm): 21 Length (mm): 106 Primary OE Reference: CM120 Quantity in Box: 25 pcs. Related products: 105826,78386,78387 Tariff Code:8433900000 Thickness (mm): 3 Type Code: C Type: Stepped Blade Width (mm): 47
£1.22£1.10
Sparex Mower Blade - Twisted blade, top edge sharp & parallel - 120 x 48x4mm - Hole Ø18.5mm - LH - Replacement for Vicon, Fella, Lely, Pottinger, Kuhn, New Holland To fit as: 90258699 - S.77074
Qty in Box: 25 pcs. Alternative to: 27635 Brand: Sparex Fasteners: S.78397, S.79699 Fitting: LH Hole Ø (mm): 18.5 Length (mm): 120 Primary OE Reference: 90258699 Quantity in Box: 25 pcs. Related products: 27635,77075,78397,79693,79694,79696,79699 Tariff Code:8433900000 Thickness (mm): 4 Type Code: F Type: Twisted blade, top edge sharp & parallel Width (mm): 48
£2.35£2.12
Sparex Mower Blade - Twisted blade, top edge sharp & parallel - 120 x 48x4mm - Hole Ø18.5mm - RH - Replacement for Vicon, Fella, Lely, Pottinger, Kuhn, New Holland To fit as: 99358700 - S.77075
Qty in Box: 25 pcs. Alternative to: 27635 Brand: Sparex Fasteners: S.78397, S.79699 Fitting: RH Hole Ø (mm): 18.5 Length (mm): 120 Primary OE Reference: 99358700 Quantity in Box: 25 pcs. Related products: 27635,77074,78397,79693,79694,79696,79699 Tariff Code:8433900000 Thickness (mm): 4 Type Code: F Type: Twisted blade, top edge sharp & parallel Width (mm): 48
£2.35£2.12
Sparex Mower Blade - Twisted blade, bottom edge sharp & parallel - 94 x 48x3mm - Hole Ø19mm - RH - Replacement for PZ, Krone, Vicon, Kuhn To fit as: TF70 - S.77113
Qty in Box: 25 pcs. Brand: Rasspe Fitting: RH Hole Ø (mm): 19 Length (mm): 94 Primary OE Reference: TF70 Quantity in Box: 25 pcs. Related products: 77114,78388 Tariff Code:8433900000 Thickness (mm): 3 Type Code: D Type: Twisted blade, bottom edge sharp & parallel Width (mm): 48
£1.62£1.46
Sparex Mower Blade - Twisted blade, bottom edge sharp & parallel - 94 x 48x3mm - Hole Ø19mm - LH - Replacement for PZ, Krone, Vicon, Kuhn To fit as: TF71 - S.77114
Qty in Box: 25 pcs. Brand: Rasspe Fitting: LH Hole Ø (mm): 19 Length (mm): 94 Primary OE Reference: TF71 Quantity in Box: 25 pcs. Related products: 77113,78388 Tariff Code:8433900000 Thickness (mm): 3 Type Code: D Type: Twisted blade, bottom edge sharp & parallel Width (mm): 48
£1.62£1.46
Sparex (25 Pcs) - Mower Blade - Twisted blade, top edge sharp & parallel - 107 x 48x4mm - Hole⌀18.5mm - LH - Replacement for Vicon, Kuhn - S.77121
Qty in Box: 25 pcs.Product Specifications Alternative to: 27636 Brand: Rasspe Fitting: LH Hole Ø (mm): 18.5 Length (mm): 107 Primary OE Reference: 90261559 Quantity in Box: 25 pcs. Related products: 105994,27636,77122 Tariff Code:8433900000 Thickness (mm): 4 Type Code: F Type: Twisted blade, top edge sharp & parallel Width (mm): 48 Suitable For Infomation Kuhn VARIOUS Vicon AM2800, CM144, CM147, CM216, CM217, CM300, CM300FA, GMR2800, GMT2800Manufacture Information Vicon 90261559, VN90261559, VGGM165
£2.04£1.84
Sparex (25 Pcs) - Mower Blade - Twisted blade, top edge sharp & parallel - 107 x 48x4mm - Hole⌀18.5mm - RH - Replacement for Vicon - S.77122
Qty in Box: 25 pcs.Product Specifications Alternative to: 27636 Brand: Rasspe Fitting: RH Hole Ø (mm): 18.5 Length (mm): 107 Primary OE Reference: 90261560 Quantity in Box: 25 pcs. Related products: 105994,27636,77121 Tariff Code:8433900000 Thickness (mm): 4 Type Code: F Type: Twisted blade, top edge sharp & parallel Width (mm): 48 Suitable For Infomation Kuhn VARIOUS Vicon AM2800, CM144, CM147, CM216, CM217, CM300, CM300FA, GMR2800, GMT2800Manufacture Information Vicon VN90261560, 90261560, VGGM166
£1.62£1.46
Sparex Reversible point 430x75x12mm Hole centres 65mm To fit as: 70004943 - S.77262
Hole Ø 11mm Brand: Sparex Duty: Heavy Fasteners: S.78714 Hole centres (mm): 65 Hole Ø (mm): 11 Length (mm): 430 Primary OE Reference: 70004943 Related products: 78714 Tariff Code:8432900000 Thickness (mm): 12 Type: Curved Width (mm): 75
£28.08£25.27
Sparex Coulter Tip To fit as: 495924 - S.77377
Coulter Tip To fit as: 495924 Brand: Sparex Fitting: RH & LH Primary OE Reference: 495924 Related products: 78597 Tariff Code:8432900000
£6.91£6.22
Sparex Coulter Flap To fit as: 494876 - S.77606
Coulter Flap To fit as: 494876 Brand: Sparex Primary OE Reference: 494876 Related products: 3589,6895 Tariff Code:8432900000
£1.52£1.37
Sparex Track Eradicator Tine - Ø5mm, Length: 275/250mm To fit as: 494813 - S.77770
Replacement for: Kverneland Brand: Sparex Fitting: RH & LH Length (mm): 275/250 Primary OE Reference: 494813 Tariff Code:8432900000 Ø (mm): 5
£3.01£2.71
Sparex Tedder haytine - LH - Length: 175mm, Width: 14mm, Ø11mm - Replacement for Vicon, Rivierre Casalis To fit as: 90036182 - S.77902
Outer Ø (mm): 76mm Brand: Grange & Walter Fitting: LH Length (mm): 175 Outer Ø (mm): 76 Primary OE Reference: 90036182 Quantity in Box: 1 pc. Related products: 77903 Tariff Code:8433900000 Width (mm): 14 Ø (mm): 11
£10.64£9.58
Sparex Tedder haytine - RH - Length: 184mm, Width: 14mm, Ø11mm - Replacement for Vicon, Rivierre Casalis To fit as: 90036183 - S.77903
Outer Ø (mm): 76mm Brand: Grange & Walter Fitting: RH Length (mm): 184 Outer Ø (mm): 76 Primary OE Reference: 90036183 Quantity in Box: 1 pc. Related products: 77902 Tariff Code:8433900000 Width (mm): 14 Ø (mm): 11
£10.30£9.27
Sparex Tedder haytine - LH - Length: 420mm, Width Ø11mm - Replacement for Vicon To fit as: 90036190 - S.77906
Outer Ø (mm) Brand: Grange & Walter Fitting: LH Length (mm): 420 Primary OE Reference: 90036190 Quantity in Box: 1 pc. Related products: 77907 Tariff Code:8433900000 Ø (mm): 11
£4.67£4.20
Sparex Tedder haytine - RH - Length: 420mm, Width Ø11mm - Replacement for Vicon To fit as: 90036191 - S.77907
Outer Ø (mm) Brand: Grange & Walter Fitting: RH Length (mm): 420 Primary OE Reference: 90036191 Quantity in Box: 1 pc. Related products: 77906 Tariff Code:8433900000 Ø (mm): 11
£4.67£4.20
Sparex Tedder haytine - LH - Length: 460mm, Width: 137mm, Ø11mm - Replacement for Vicon To fit as: 99136240 - S.77908
Outer Ø (mm) Brand: Grange & Walter Fitting: LH Length (mm): 460 Primary OE Reference: 99136240 Quantity in Box: 1 pc. Related products: 77909 Tariff Code:8433900000 Width (mm): 137 Ø (mm): 11
£7.00£6.30
Sparex Tedder haytine - RH - Length: 460mm, Width: 137mm, Ø11mm - Replacement for Vicon To fit as: 99136241 - S.77909
Outer Ø (mm) Brand: Grange & Walter Fitting: RH Length (mm): 460 Primary OE Reference: 99136241 Quantity in Box: 1 pc. Related products: 77908 Tariff Code:8433900000 Width (mm): 137 Ø (mm): 11
£12.91£11.62
Sparex Haytine - Swather - RH & LH - Length:610mm, Width:450mm, Ø6.5mm - Replacement for Vicon To fit as: 90036133 - S.78180
For 6 reel trailing rake. Tine length: 610mm. Brand: Sparex Fitting: RH & LH Length (mm): 610 Primary OE Reference: 90036133 Quantity in Box: 1 pc. Tariff Code:8433900000 Width (mm): 450 Ø (mm): 6.5
£1.21£1.09
Sparex Wheel Rake Tine - RH & LH - Length:650mm, Width:440mm, Ø6.5mm - Replacement for Vicon To fit as: 90092611 - S.78195
For 4 reel 3 point linkage rake. Brand: Grange & Walter Fitting: RH & LH Length (mm): 650 Primary OE Reference: 90092611 Quantity in Box: 1 pc. Tariff Code:8433900000 Width (mm): 440 Ø (mm): 6.5
£2.83£2.55
Sparex Mower Blade Retainer- M10x32mm - Replacement for Vicon To fit as: 81160k - S.78403
Head Ø: 30mm, Collar Diameter:18mm, Thread length: 17mm Brand: Sparex Collar Diameter mm: 18 Collar Length mm: 8.5 Head Ø (mm): 30 Length (mm): 32 Primary OE Reference: 81160k Related products: 27596,77074,77075 Tariff Code:7318190090 Thread length (mm): 17 Thread size: M10 Thread type: Metric
£2.02£1.81
Sparex Pick-Up Tine - - - Length:221mm, Width:75mm, Ø7mm - Replacement for Rivierre Casalis, Vicon To fit as: 18608684 - S.78966
Outer Ø (mm): 49mm Brand: Grange & Walter Length (mm): 221 Outer Ø (mm): 49 Primary OE Reference: 18608684 Quantity in Box: 1 pc. Tariff Code:8433900000 Width (mm): 75 Ø (mm): 7
£5.72£5.15
Sparex Pick-Up Tine Length:204mm, Width:71mm, Ø5.5mm - Replacement for Rivierre Casalis, Vicon, Massey Ferguson, PZ To fit as: 18606450 - S.78969
Outer Ø (mm): 38mm Brand: Grange & Walter Length (mm): 204 Outer Ø (mm): 38 Primary OE Reference: 18606450 Quantity in Box: 1 pc. Tariff Code:8433900000 Width (mm): 71 Ø (mm): 5.5
£3.01£2.71
Sparex Seeder Tine - Ø8mm, Length: 585mm To fit as: 495754 - S.78978
Replacement for: Accord, Ferrag, Kuhn, Sulky Alternative to: 118405 Brand: Sparex Fitting: RH & LH Length (mm): 585 Outer Ø (mm): 73 Primary OE Reference: 495754 Tariff Code:8432900000 Width (mm): 92 Ø (mm): 8
£8.33£7.50
Sparex Clamp To fit as: 17720087 - S.79402
Suitable for PS03/PS04 Brand: Sparex Primary OE Reference: 17720087 Related products: 22808,79403 Supplied with Nuts and Bolts: Not supplied with fasteners Tariff Code:8432900000
£38.71£34.84
You have seen 48 out of 54 products